[Sun May 20 10:44:39 2012] Detection parameters:
  Position = (296.0, 319.0) = 11 24 28.64 -59 15 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13086.4 +/- 143.0
  Background counts = 316.0
  Rate = 0.8 +/- 0.009

[Sun May 20 10:44:45 2012] Off-axis axis estimate = 1.50'
[Sun May 20 17:47:53 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun May 20 17:47:53 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun May 20 17:47:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Sun May 20 17:47:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.18"
[Mon May 21 07:12:03 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 21 07:12:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src1.csv
[Mon May 21 07:12:03 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 21 07:12:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src1.csv
[Mon May 21 07:12:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 07:12:05 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 21 07:12:05 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 21 07:12:05 2012] Fit fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 21 17:11:10 2012] Spatial fit model total counts = 29492.500000, observed total counts = 29488.000000
[Mon May 21 17:11:10 2012] Offset between fit and detection position for source 1 = 0.327853 pixels
[Mon May 21 17:11:10 2012] 29317.530000 total counts/ 20229.100000 bgd. counts: snr = 63.899960
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.327853 pixels
  Position = (295.7, 319.2) = 11 24 28.81 -59 15 47.3
  Extent = 14.4 (14.3-28.7)", rotation angle = 0
  Source counts = 9088.4 +/- 171.2
  Background counts = 20229.1
  Rate = 0.8 +/- 0.01
[Mon May 21 17:11:11 2012] Vigneting correction estimate = 1.000000
[Mon May 21 17:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 17:11:11 2012] Assessing source extent using major axis lower bound
[Mon May 21 17:11:11 2012] Source does appear to be extended
[Mon May 21 17:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 17:11:11 2012] Source is confused with source 6
[Mon May 21 17:11:11 2012] Source is confused with source 2
[Mon May 21 17:11:11 2012] Source is confused with source 18
[Tue May 22 06:51:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 06:51:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 06:51:16 2012] Initial guess for spatial extent in simple fitting = 14.36"
[Tue May 22 06:51:16 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.107
[Tue May 22 06:51:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.36"
[Tue May 22 13:06:28 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 22 13:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src1.csv
[Tue May 22 13:06:28 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 22 13:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src1.csv
[Tue May 22 13:06:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 13:06:30 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 22 13:06:30 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 22 13:06:30 2012] Fit fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 22 21:23:24 2012] Warning, spatial fit 1 centroid is now closest to src. 27
[Tue May 22 21:23:24 2012] Vigneting correction estimate = 1.000000
[Tue May 22 21:23:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 21:23:24 2012] Assessing source extent using major axis lower bound
[Tue May 22 21:23:24 2012] Source does appear to be extended
[Tue May 22 21:23:24 2012] Computing asymmetry using major and minor axis, asym = 1.00