[Fri Aug 24 01:01:38 2012] Detection parameters:
  Position = (340.4, 335.5) = 11 24 3.51 -59 14 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.6 +/- 24.0
  Background counts = 229.0
  Rate = 0.03 +/- 0.003

[Fri Aug 24 01:01:38 2012] Off-axis axis estimate = 4.06'
[Fri Aug 24 01:07:13 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 01:07:13 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Fri Aug 24 01:07:13 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.046
[Fri Aug 24 01:07:13 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.46"
[Fri Aug 24 04:47:44 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src53.ximg exists
[Fri Aug 24 04:47:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src53.csv
[Fri Aug 24 04:47:44 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri Aug 24 04:47:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src53.csv
[Fri Aug 24 04:47:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 04:47:45 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri Aug 24 04:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53.csv
[Fri Aug 24 04:47:45 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Aug 24 04:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53.csv
[Fri Aug 24 04:47:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:22:08 2012] Spatial fit model total counts = 1875.890000, observed total counts = 1597.000000
[Fri Aug 24 13:22:08 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 24 13:22:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:08 2012] Assessing source extent using major
[Fri Aug 24 13:22:08 2012] Source does appear to be extended
[Fri Aug 24 13:22:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:08 2012] Source is confused with source 52
[Fri Aug 24 13:22:57 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:22:57 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Fri Aug 24 13:22:57 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.046
[Fri Aug 24 13:22:57 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 8.46"
[Fri Aug 24 16:47:25 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src52.ximg exists
[Fri Aug 24 16:47:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src52.csv
[Fri Aug 24 16:47:25 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri Aug 24 16:47:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src52.csv
[Fri Aug 24 16:47:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 16:47:27 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri Aug 24 16:47:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src52.csv
[Fri Aug 24 16:47:27 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri Aug 24 16:47:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src52.csv
[Fri Aug 24 16:47:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:14:07 2012] Source 53 is offset by -0.228916 and 7.118320 pixels which is larger than
2 X fitted extent = 0.948308 x 0.948308, not incorporating fit results
[Sat Aug 25 02:14:07 2012] Spatial fit model total counts = 1877.140000, observed total counts = 1597.000000
[Sat Aug 25 02:14:07 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 02:14:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:07 2012] Assessing source extent using major
[Sat Aug 25 02:14:07 2012] Source does appear to be extended
[Sat Aug 25 02:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 02:14:52 2012] XMMSAS src. selection expression = ellipse(29562.606323, 29142.771851, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 25 02:14:52 2012] Writing source region out to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src53_src.reg
[Sat Aug 25 02:14:52 2012] Extracting stamp from image fullrun_pn_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (303, 298) - (378, 373)
[Sat Aug 25 02:14:52 2012] XMMSAS bgd. selection expression = annulus(29562.606323, 29142.771851, 1087.500000, 2175.000000, X, Y) && !ellipse(27690.333620, 27002.893480, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(27682.026000, 28810.936000, 776.657622, 776.657622, 0.000000, X, Y) && !ellipse(28046.496979, 26313.331024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27729.475861, 29426.392700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26588.739868, 29723.631195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29047.682202, 26492.283776, 1184.176034, 570.542746, 108.899157, X, Y) && !ellipse(26725.829651, 31267.350189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.714355, 30885.474670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.250641, 30704.117584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29152.610600, 26886.074200, 577.937617, 577.937617, 0.000000, X, Y) && !ellipse(28270.857574, 30477.117889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28921.610565, 29090.135895, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 02:14:52 2012] Writing fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src53.gif
[Sat Aug 25 03:39:42 2012] Mean detx,y = (2672.47, 4344.40) 
[Sat Aug 25 03:39:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 03:40:04 2012] grppha failed
[Sat Aug 25 03:40:04 2012] Setting source spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src53_src.pi.gz
[Sat Aug 25 03:40:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat Aug 25 03:43:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 03:43:16 2012] rmf not generated due to insufficient counts
[Sat Aug 25 07:07:02 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:02 2012] Error reading totcts from fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src53_src.pi.gz
[Sat Aug 25 07:07:03 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 07:07:11 2012] xmm0110012601/analysis//spectral/fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete