[Fri Aug 24 01:01:38 2012] Detection parameters:
  Position = (297.0, 273.0) = 11 24 28.10 -59 19 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 735.0 +/- 44.0
  Background counts = 332.2
  Rate = 0.1 +/- 0.009

[Fri Aug 24 01:01:38 2012] Off-axis axis estimate = 1.85'
[Fri Aug 24 01:07:13 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 01:07:13 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Fri Aug 24 01:07:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Fri Aug 24 01:07:13 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 7.35"
[Fri Aug 24 04:47:44 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src45.ximg exists
[Fri Aug 24 04:47:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src45.csv
[Fri Aug 24 04:47:44 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src45_1.ximg exists
[Fri Aug 24 04:47:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src45.csv
[Fri Aug 24 04:47:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 04:47:45 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Fri Aug 24 04:47:45 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Fri Aug 24 04:47:45 2012] Fit fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Fri Aug 24 13:22:08 2012] Spatial fit model total counts = 4876.480000, observed total counts = 3814.000000
[Fri Aug 24 13:22:08 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 24 13:22:08 2012] Spatial fit model total counts = 3868.860000, observed total counts = 3701.000000
[Fri Aug 24 13:22:08 2012] Offset between fit and detection position for source 45 = 1.869117 pixels
[Fri Aug 24 13:22:08 2012] 4023.925000 total counts/ 3337.260000 bgd. counts: snr = 11.886388
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.869117 pixels
  Position = (296.6, 271.2) = 11 24 28.32 -59 19 16.4
  Extent = 13.6 (11.5-14.7)", rotation angle = 0
  Source counts = 686.7 +/- 63.4
  Background counts = 3337.3
  Rate = 0.2 +/- 0.02
[Fri Aug 24 13:22:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:08 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 13:22:08 2012] Source does appear to be extended
[Fri Aug 24 13:22:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:08 2012] Source is confused with source 42
[Fri Aug 24 13:22:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:22:57 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Fri Aug 24 13:22:57 2012] source mask rpix=3.1, npix_max = 52, mask sum = 37, frac = 0.701
[Fri Aug 24 13:22:57 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 13.63"
[Fri Aug 24 16:47:25 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src44.ximg exists
[Fri Aug 24 16:47:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src44.csv
[Fri Aug 24 16:47:25 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri Aug 24 16:47:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src44.csv
[Fri Aug 24 16:47:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 16:47:26 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri Aug 24 16:47:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri Aug 24 16:47:26 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Aug 24 16:47:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri Aug 24 16:47:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:14:07 2012] Spatial fit model total counts = 5085.340000, observed total counts = 4498.000000
[Sat Aug 25 02:14:07 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 02:14:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:07 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 02:14:07 2012] Source does appear to be extended
[Sat Aug 25 02:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 02:14:52 2012] XMMSAS src. selection expression = ellipse(25756.317400, 23541.824000, 817.908024, 817.908024, 0.000000, X, Y)
[Sat Aug 25 02:14:52 2012] Writing source region out to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src45_src.reg
[Sat Aug 25 02:14:52 2012] Extracting stamp from image fullrun_pn_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (250, 224) - (344, 318)
[Sat Aug 25 02:14:52 2012] XMMSAS bgd. selection expression = annulus(25756.317400, 23541.824000, 1363.180039, 2726.360078, X, Y) && !ellipse(25656.955775, 27732.176472, 1483.757083, 928.473173, 1.260573, X, Y) && !ellipse(27690.333620, 27002.893480, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(28046.496979, 26313.331024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22028.974000, 26682.730000, 1277.776037, 1277.776037, 0.000000, X, Y) && !ellipse(23776.901886, 25971.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25433.934875, 26744.613983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27434.499451, 24933.751251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29047.682202, 26492.283776, 1184.176034, 570.542746, 108.899157, X, Y) && !ellipse(26305.217255, 25789.884033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.116699, 25710.262360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.459045, 25072.792480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.848969, 24362.349121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.649078, 24647.881592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25960.265228, 24325.515900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23762.092133, 24139.324005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27676.481476, 24001.413818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26923.554993, 24099.851685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.191833, 23081.501923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24609.824402, 24541.911407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25753.381800, 22157.227000, 1275.296037, 1275.296037, 0.000000, X, Y) && !ellipse(28568.961609, 24750.339172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.848000, 24541.810000, 1221.776035, 1221.776035, 0.000000, X, Y) && !ellipse(24784.373993, 23824.031311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.524353, 22536.867798, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 02:14:52 2012] Writing fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src45.gif
[Sat Aug 25 03:32:47 2012] Mean detx,y = (-3255.20, 1769.13) 
[Sat Aug 25 03:32:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 03:33:01 2012] grppha failed
[Sat Aug 25 03:33:02 2012] Setting source spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src45_src.pi.gz
[Sat Aug 25 03:33:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sat Aug 25 07:07:02 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:02 2012] Error reading totcts from fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src45_src.pi.gz
[Sat Aug 25 07:07:03 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:10 2012] Flag p found in src. 45 procflags, skipping spectral fitting
[Sat Aug 25 07:07:10 2012] Flag c found in src. 45 procflags, skipping spectral fitting
[Sat Aug 25 07:07:10 2012] Source 45 has no response, skipping
[Sat Aug 25 07:07:11 2012] xmm0110012601/analysis//spectral/fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete