[Fri Aug 24 01:01:38 2012] Detection parameters:
  Position = (304.0, 288.8) = 11 24 24.14 -59 18 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 882.7 +/- 46.0
  Background counts = 287.5
  Rate = 0.1 +/- 0.007

[Fri Aug 24 01:01:38 2012] Off-axis axis estimate = 0.81'
[Fri Aug 24 01:07:13 2012] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 01:07:13 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Fri Aug 24 01:07:13 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.933
[Fri Aug 24 01:07:13 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 6.83"
[Fri Aug 24 04:47:43 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src39.ximg exists
[Fri Aug 24 04:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src39.csv
[Fri Aug 24 04:47:43 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src39_1.ximg exists
[Fri Aug 24 04:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src39.csv
[Fri Aug 24 04:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 04:47:45 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Fri Aug 24 04:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src39.csv
[Fri Aug 24 04:47:45 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Aug 24 04:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src39.csv
[Fri Aug 24 04:47:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:22:08 2012] Warning, spatial fit 39 centroid is now closest to src. 37
[Fri Aug 24 13:22:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:08 2012] Assessing source extent using major
[Fri Aug 24 13:22:08 2012] Source does appear to be extended
[Fri Aug 24 13:22:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:57 2012] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:22:57 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Fri Aug 24 13:22:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.933
[Fri Aug 24 13:22:57 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 6.83"
[Fri Aug 24 16:47:25 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src38.ximg exists
[Fri Aug 24 16:47:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src38.csv
[Fri Aug 24 16:47:25 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src38_1.ximg exists
[Fri Aug 24 16:47:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src38.csv
[Fri Aug 24 16:47:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 16:47:26 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Fri Aug 24 16:47:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri Aug 24 16:47:26 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Fri Aug 24 16:47:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri Aug 24 16:47:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:14:07 2012] Warning, spatial fit 38 centroid is now closest to src. 37
[Sat Aug 25 02:14:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:07 2012] Assessing source extent using major
[Sat Aug 25 02:14:07 2012] Source does appear to be extended
[Sat Aug 25 02:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 02:14:52 2012] XMMSAS src. selection expression = ellipse(26395.459045, 25072.792480, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 25 02:14:52 2012] Writing source region out to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src39_src.reg
[Sat Aug 25 02:14:52 2012] Extracting stamp from image fullrun_pn_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (266, 251) - (341, 326)
[Sat Aug 25 02:14:52 2012] XMMSAS bgd. selection expression = annulus(26395.459045, 25072.792480, 1087.500000, 2175.000000, X, Y) && !ellipse(24557.820061, 27721.406521, 1153.808033, 763.360841, 178.865444, X, Y) && !ellipse(25656.955775, 27732.176472, 1483.757083, 928.473173, 1.260573, X, Y) && !ellipse(27690.333620, 27002.893480, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(23959.286469, 27174.311890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28046.496979, 26313.331024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23776.901886, 25971.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25433.934875, 26744.613983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27434.499451, 24933.751251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29047.682202, 26492.283776, 1184.176034, 570.542746, 108.899157, X, Y) && !ellipse(26305.217255, 25789.884033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.116699, 25710.262360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.848969, 24362.349121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.649078, 24647.881592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25960.265228, 24325.515900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23762.092133, 24139.324005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27676.481476, 24001.413818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25756.317400, 23541.824000, 1090.544031, 1090.544031, 0.000000, X, Y) && !ellipse(26923.554993, 24099.851685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.191833, 23081.501923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24609.824402, 24541.911407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25753.381800, 22157.227000, 1275.296037, 1275.296037, 0.000000, X, Y) && !ellipse(28568.961609, 24750.339172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.848000, 24541.810000, 1221.776035, 1221.776035, 0.000000, X, Y) && !ellipse(24784.373993, 23824.031311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.524353, 22536.867798, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 02:14:52 2012] Writing fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src39.gif
[Sat Aug 25 03:27:54 2012] Mean detx,y = (-1714.71, 2113.33) 
[Sat Aug 25 03:27:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 03:28:15 2012] grppha failed
[Sat Aug 25 03:28:15 2012] Setting source spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src39_src.pi.gz
[Sat Aug 25 03:28:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat Aug 25 03:43:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 03:43:14 2012] rmf not generated due to insufficient counts
[Sat Aug 25 07:07:02 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:02 2012] Error reading totcts from fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src39_src.pi.gz
[Sat Aug 25 07:07:03 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 07:07:11 2012] xmm0110012601/analysis//spectral/fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete