[Fri Aug 24 01:01:38 2012] Detection parameters:
  Position = (265.0, 346.9) = 11 24 46.25 -59 13 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 886.2 +/- 49.5
  Background counts = 428.4
  Rate = 0.2 +/- 0.01

[Fri Aug 24 01:01:38 2012] Off-axis axis estimate = 4.27'
[Fri Aug 24 01:07:13 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 01:07:13 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Fri Aug 24 01:07:13 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Fri Aug 24 01:07:13 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.56"
[Fri Aug 24 04:47:43 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src31.ximg exists
[Fri Aug 24 04:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src31.csv
[Fri Aug 24 04:47:43 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri Aug 24 04:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src31.csv
[Fri Aug 24 04:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 04:47:45 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri Aug 24 04:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src31.csv
[Fri Aug 24 04:47:45 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Aug 24 04:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src31.csv
[Fri Aug 24 04:47:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:22:08 2012] Warning, spatial fit 31 centroid is now closest to src. 30
[Fri Aug 24 13:22:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:08 2012] Assessing source extent using major
[Fri Aug 24 13:22:08 2012] Source does appear to be extended
[Fri Aug 24 13:22:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:08 2012] Source is confused with source 30
[Fri Aug 24 13:22:57 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:22:57 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Fri Aug 24 13:22:57 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Fri Aug 24 13:22:57 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.56"
[Fri Aug 24 16:47:25 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src30.ximg exists
[Fri Aug 24 16:47:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src30.csv
[Fri Aug 24 16:47:25 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Aug 24 16:47:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src30.csv
[Fri Aug 24 16:47:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 16:47:26 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Aug 24 16:47:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Aug 24 16:47:26 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Aug 24 16:47:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Aug 24 16:47:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:14:07 2012] Spatial fit model total counts = 5594.910000, observed total counts = 4920.000000
[Sat Aug 25 02:14:07 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 02:14:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:07 2012] Assessing source extent using major
[Sat Aug 25 02:14:07 2012] Source does appear to be extended
[Sat Aug 25 02:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 02:14:51 2012] XMMSAS src. selection expression = ellipse(23003.075012, 30134.467773, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 25 02:14:51 2012] Writing source region out to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src31_src.reg
[Sat Aug 25 02:14:51 2012] Extracting stamp from image fullrun_pn_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (227, 309) - (302, 384)
[Sat Aug 25 02:14:51 2012] XMMSAS bgd. selection expression = annulus(23003.075012, 30134.467773, 1087.500000, 2175.000000, X, Y) && !ellipse(24557.820061, 27721.406521, 1153.808033, 763.360841, 178.865444, X, Y) && !ellipse(25656.955775, 27732.176472, 1483.757083, 928.473173, 1.260573, X, Y) && !ellipse(22899.402000, 27821.390000, 1277.776037, 1277.776037, 0.000000, X, Y) && !ellipse(23959.286469, 27174.311890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22770.945200, 29055.971400, 1319.528038, 1319.528038, 0.000000, X, Y) && !ellipse(22028.974000, 26682.730000, 1277.776037, 1277.776037, 0.000000, X, Y) && !ellipse(25488.710000, 29020.244000, 891.488026, 891.488026, 0.000000, X, Y) && !ellipse(24717.577800, 28871.905800, 980.840028, 549.357616, 303.948000, X, Y) && !ellipse(21306.892288, 28117.680969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25114.672913, 31609.527710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26030.307556, 31448.486908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23352.086578, 31203.417084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24051.224823, 31283.495422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22037.586000, 30634.230000, 1388.456040, 1388.456040, 0.000000, X, Y) && !ellipse(24501.764709, 29784.662354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24326.798279, 28996.848785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21108.912064, 28913.889740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23577.024000, 32235.670000, 1457.928042, 1457.928042, 0.000000, X, Y) && !ellipse(22786.169739, 31544.514008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25331.583496, 32486.223694, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 02:14:51 2012] Writing fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src31.gif
[Sat Aug 25 03:23:25 2012] Mean detx,y = (2419.68, -2179.33) 
[Sat Aug 25 03:23:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 03:23:43 2012] grppha failed
[Sat Aug 25 03:23:43 2012] Setting source spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src31_src.pi.gz
[Sat Aug 25 03:23:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Aug 25 03:43:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 03:43:13 2012] rmf not generated due to insufficient counts
[Sat Aug 25 07:07:02 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:02 2012] Error reading totcts from fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src31_src.pi.gz
[Sat Aug 25 07:07:03 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 07:07:11 2012] xmm0110012601/analysis//spectral/fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete