[Fri Aug 24 01:01:37 2012] Detection parameters:
  Position = (294.9, 332.9) = 11 24 29.28 -59 14 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2032.3 +/- 70.6
  Background counts = 478.2
  Rate = 0.5 +/- 0.02

[Fri Aug 24 01:01:38 2012] Off-axis axis estimate = 2.51'
[Fri Aug 24 01:07:13 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 01:07:13 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Fri Aug 24 01:07:13 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Fri Aug 24 01:07:13 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.68"
[Fri Aug 24 04:47:43 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src13.ximg exists
[Fri Aug 24 04:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src13.csv
[Fri Aug 24 04:47:43 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Aug 24 04:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src13.csv
[Fri Aug 24 04:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 04:47:44 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug 24 04:47:44 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug 24 04:47:44 2012] Fit fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Aug 24 13:22:08 2012] Spatial fit model total counts = 9474.060000, observed total counts = 9464.000000
[Fri Aug 24 13:22:08 2012] Offset between fit and detection position for source 13 = 4.306783 pixels
[Fri Aug 24 13:22:08 2012] 9246.780000 total counts/ 7375.650000 bgd. counts: snr = 21.787320
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 4.306783 pixels
  Position = (297.6, 329.5) = 11 24 27.78 -59 15 2.5
  Extent = 15.4 (15.2-30.7)", rotation angle = 0
  Source counts = 1871.1 +/- 96.2
  Background counts = 7375.6
  Rate = 0.5 +/- 0.03
[Fri Aug 24 13:22:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:08 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 13:22:08 2012] Source does appear to be extended
[Fri Aug 24 13:22:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:08 2012] Source is confused with source 2
[Fri Aug 24 13:22:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:22:57 2012] Initial guess for spatial extent in simple fitting = 15.37"
[Fri Aug 24 13:22:57 2012] source mask rpix=3.5, npix_max = 65, mask sum = 72, frac = 1.107
[Fri Aug 24 13:22:57 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 15.37"
[Fri Aug 24 16:47:24 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src12.ximg exists
[Fri Aug 24 16:47:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src12.csv
[Fri Aug 24 16:47:24 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Aug 24 16:47:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src12.csv
[Fri Aug 24 16:47:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 16:47:26 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Aug 24 16:47:26 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Aug 24 16:47:26 2012] Fit fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Aug 25 02:14:07 2012] Spatial fit model total counts = 11595.700000, observed total counts = 11592.000000
[Sat Aug 25 02:14:07 2012] Offset between fit and detection position for source 13 = 6.121033 pixels
[Sat Aug 25 02:14:07 2012] Warning, changing simple spatial fit ID from 12 to 10
[Sat Aug 25 02:14:07 2012] 10212.570000 total counts/ 9584.580000 bgd. counts: snr = 6.414550
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 6.121033 pixels
  Position = (293.5, 334.1) = 11 24 30.06 -59 14 42.5
  Extent = 11.1 (11.1-22.3)", rotation angle = 0
  Source counts = 628.0 +/- 101.1
  Background counts = 9584.6
  Rate = 0.2 +/- 0.03
[Sat Aug 25 02:14:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:07 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 02:14:07 2012] Source does appear to be extended
[Sat Aug 25 02:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 02:14:50 2012] XMMSAS src. selection expression = ellipse(25488.710000, 29020.244000, 668.616019, 668.616019, 0.000000, X, Y)
[Sat Aug 25 02:14:50 2012] Writing source region out to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src13_src.reg
[Sat Aug 25 02:14:50 2012] Extracting stamp from image fullrun_pn_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (255, 296) - (332, 373)
[Sat Aug 25 02:14:50 2012] XMMSAS bgd. selection expression = annulus(25488.710000, 29020.244000, 1114.360032, 2228.720064, X, Y) && !ellipse(24557.820061, 27721.406521, 1153.808033, 763.360841, 178.865444, X, Y) && !ellipse(25656.955775, 27732.176472, 1483.757083, 928.473173, 1.260573, X, Y) && !ellipse(22899.402000, 27821.390000, 1277.776037, 1277.776037, 0.000000, X, Y) && !ellipse(27690.333620, 27002.893480, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(23959.286469, 27174.311890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22770.945200, 29055.971400, 1319.528038, 1319.528038, 0.000000, X, Y) && !ellipse(26593.338200, 28276.637000, 720.176021, 720.176021, 0.000000, X, Y) && !ellipse(27682.026000, 28810.936000, 776.657622, 776.657622, 0.000000, X, Y) && !ellipse(28046.496979, 26313.331024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25906.639800, 28530.005000, 445.744013, 445.744013, 0.000000, X, Y) && !ellipse(22028.974000, 26682.730000, 1277.776037, 1277.776037, 0.000000, X, Y) && !ellipse(24717.577800, 28871.905800, 980.840028, 549.357616, 303.948000, X, Y) && !ellipse(27729.475861, 29426.392700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23776.901886, 25971.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25433.934875, 26744.613983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26588.739868, 29723.631195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25114.672913, 31609.527710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26725.829651, 31267.350189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26030.307556, 31448.486908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23352.086578, 31203.417084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24051.224823, 31283.495422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.714355, 30885.474670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.250641, 30704.117584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22037.586000, 30634.230000, 1388.456040, 1388.456040, 0.000000, X, Y) && !ellipse(23003.075012, 30134.467773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24501.764709, 29784.662354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24326.798279, 28996.848785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23577.024000, 32235.670000, 1457.928042, 1457.928042, 0.000000, X, Y) && !ellipse(22786.169739, 31544.514008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28270.857574, 30477.117889, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 02:14:50 2012] Writing fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src13.gif
[Sat Aug 25 02:55:52 2012] Mean detx,y = (1850.86, 473.64) 
[Sat Aug 25 02:55:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 02:56:09 2012] grppha failed
[Sat Aug 25 02:56:09 2012] Setting source spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src13_src.pi.gz
[Sat Aug 25 02:56:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Aug 25 07:07:01 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:02 2012] Error reading totcts from fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src13_src.pi.gz
[Sat Aug 25 07:07:03 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:10 2012] Flag c found in src. 13 procflags, skipping spectral fitting
[Sat Aug 25 07:07:10 2012] Source 13 has no response, skipping
[Sat Aug 25 07:07:11 2012] xmm0110012601/analysis//spectral/fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete