[Fri Aug 24 01:01:37 2012] Detection parameters:
  Position = (322.9, 303.0) = 11 24 13.37 -59 16 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1993.0 +/- 63.5
  Background counts = 285.1
  Rate = 0.5 +/- 0.02

[Fri Aug 24 01:01:38 2012] Off-axis axis estimate = 1.81'
[Fri Aug 24 01:07:13 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 01:07:13 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Fri Aug 24 01:07:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Fri Aug 24 01:07:13 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.33"
[Fri Aug 24 04:47:43 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src10.ximg exists
[Fri Aug 24 04:47:43 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Aug 24 04:47:43 2012] Fit fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_src10 appears to have run properly
[Fri Aug 24 04:47:44 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Aug 24 04:47:44 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Aug 24 04:47:44 2012] Fit fullrun_pn_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Aug 24 13:22:08 2012] Source 10 is offset by 3.606885 and -7.369368 pixels which is larger than
2 X fitted extent = 6.741931 x 6.741931, not incorporating fit results
[Fri Aug 24 13:22:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:08 2012] Assessing source extent using major
[Fri Aug 24 13:22:08 2012] Source does appear to be extended
[Fri Aug 24 13:22:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:08 2012] Source is confused with source 5
[Fri Aug 24 13:22:57 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:22:57 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Fri Aug 24 13:22:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Fri Aug 24 13:22:57 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.33"
[Fri Aug 24 16:47:24 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src9.ximg exists
[Fri Aug 24 16:47:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src9.csv
[Fri Aug 24 16:47:24 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Aug 24 16:47:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src9.csv
[Fri Aug 24 16:47:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 16:47:26 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Aug 24 16:47:26 2012] fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Aug 24 16:47:26 2012] Fit fullrun_pn_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Aug 25 02:14:07 2012] Source 10 is offset by 3.350379 and -7.274655 pixels which is larger than
2 X fitted extent = 6.741931 x 6.741931, not incorporating fit results
[Sat Aug 25 02:14:07 2012] Spatial fit model total counts = 3703.770000, observed total counts = 3192.000000
[Sat Aug 25 02:14:07 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 02:14:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:07 2012] Assessing source extent using major
[Sat Aug 25 02:14:07 2012] Source does appear to be extended
[Sat Aug 25 02:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 02:14:50 2012] Counts = 1992.966675, rescaling region sizes by 2.000000
[Sat Aug 25 02:14:50 2012] XMMSAS src. selection expression = ellipse(28046.496979, 26313.331024, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Aug 25 02:14:50 2012] Writing source region out to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src10_src.reg
[Sat Aug 25 02:14:50 2012] Extracting stamp from image fullrun_pn_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (248, 228) - (398, 378)
[Sat Aug 25 02:14:50 2012] XMMSAS bgd. selection expression = annulus(28046.496979, 26313.331024, 4350.000000, 8700.000000, X, Y) && !ellipse(24557.820061, 27721.406521, 1153.808033, 763.360841, 178.865444, X, Y) && !ellipse(25656.955775, 27732.176472, 1483.757083, 928.473173, 1.260573, X, Y) && !ellipse(22899.402000, 27821.390000, 1277.776037, 1277.776037, 0.000000, X, Y) && !ellipse(27690.333620, 27002.893480, 1332.416038, 1332.416038, 0.000000, X, Y) && !ellipse(23959.286469, 27174.311890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22770.945200, 29055.971400, 1319.528038, 1319.528038, 0.000000, X, Y) && !ellipse(26593.338200, 28276.637000, 720.176021, 720.176021, 0.000000, X, Y) && !ellipse(27682.026000, 28810.936000, 776.657622, 776.657622, 0.000000, X, Y) && !ellipse(25906.639800, 28530.005000, 445.744013, 445.744013, 0.000000, X, Y) && !ellipse(22028.974000, 26682.730000, 1277.776037, 1277.776037, 0.000000, X, Y) && !ellipse(25488.710000, 29020.244000, 891.488026, 891.488026, 0.000000, X, Y) && !ellipse(24717.577800, 28871.905800, 980.840028, 549.357616, 303.948000, X, Y) && !ellipse(27729.475861, 29426.392700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21306.892288, 28117.680969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23776.901886, 25971.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25433.934875, 26744.613983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27434.499451, 24933.751251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26588.739868, 29723.631195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29047.682202, 26492.283776, 1184.176034, 570.542746, 108.899157, X, Y) && !ellipse(25114.672913, 31609.527710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26725.829651, 31267.350189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26030.307556, 31448.486908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23352.086578, 31203.417084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24051.224823, 31283.495422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.714355, 30885.474670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.250641, 30704.117584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22037.586000, 30634.230000, 1388.456040, 1388.456040, 0.000000, X, Y) && !ellipse(23003.075012, 30134.467773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24501.764709, 29784.662354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24326.798279, 28996.848785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21108.912064, 28913.889740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29152.610600, 26886.074200, 577.937617, 577.937617, 0.000000, X, Y) && !ellipse(26305.217255, 25789.884033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.116699, 25710.262360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.459045, 25072.792480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.848969, 24362.349121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.649078, 24647.881592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25960.265228, 24325.515900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23762.092133, 24139.324005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27676.481476, 24001.413818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25756.317400, 23541.824000, 1090.544031, 1090.544031, 0.000000, X, Y) && !ellipse(26923.554993, 24099.851685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.191833, 23081.501923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23577.024000, 32235.670000, 1457.928042, 1457.928042, 0.000000, X, Y) && !ellipse(24609.824402, 24541.911407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22786.169739, 31544.514008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28270.857574, 30477.117889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28921.610565, 29090.135895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29562.606323, 29142.771851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25753.381800, 22157.227000, 1275.296037, 1275.296037, 0.000000, X, Y) && !ellipse(28568.961609, 24750.339172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.848000, 24541.810000, 1221.776035, 1221.776035, 0.000000, X, Y) && !ellipse(24784.373993, 23824.031311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.524353, 22536.867798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25331.583496, 32486.223694, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 02:14:50 2012] Writing fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src10.gif
[Sat Aug 25 02:46:55 2012] Mean detx,y = (-153.44, 3348.37) 
[Sat Aug 25 02:46:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 02:49:33 2012] grppha failed
[Sat Aug 25 02:49:33 2012] Setting source spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src10_src.pi.gz
[Sat Aug 25 02:49:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Aug 25 03:43:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 03:43:11 2012] rmf not generated due to insufficient counts
[Sat Aug 25 07:07:01 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:01 2012] Error reading totcts from fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src10_src.pi.gz
[Sat Aug 25 07:07:03 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 07:07:11 2012] xmm0110012601/analysis//spectral/fullrun_pn_xmm0110012601_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete