[Fri Aug 24 01:03:06 2012] Detection parameters:
  Position = (296.9, 272.2) = 11 24 28.18 -59 19 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 707.7 +/- 39.4
  Background counts = 159.9
  Rate = 0.07 +/- 0.004

[Fri Aug 24 01:03:06 2012] Off-axis axis estimate = 1.91'
[Fri Aug 24 08:20:24 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 08:20:24 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Fri Aug 24 08:20:24 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Fri Aug 24 08:20:24 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 7.38"
[Fri Aug 24 13:21:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src54.ximg exists
[Fri Aug 24 13:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src54.csv
[Fri Aug 24 13:21:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src54_1.ximg exists
[Fri Aug 24 13:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src54.csv
[Fri Aug 24 13:21:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:21:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Fri Aug 24 13:21:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Fri Aug 24 13:21:50 2012] Fit fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Fri Aug 24 13:22:40 2012] Spatial fit model total counts = 2767.790000, observed total counts = 2762.000000
[Fri Aug 24 13:22:40 2012] Offset between fit and detection position for source 57 = 0.189059 pixels
[Fri Aug 24 13:22:40 2012] 2836.697000 total counts/ 2513.000000 bgd. counts: snr = 6.457173
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.189059 pixels
  Position = (296.7, 272.1) = 11 24 28.29 -59 19 12.1
  Extent = 8.0 (6.7-10.1)", rotation angle = 0
  Source counts = 323.7 +/- 53.3
  Background counts = 2513.0
  Rate = 0.04 +/- 0.007
[Fri Aug 24 13:22:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:40 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 13:22:40 2012] Source does appear to be extended
[Fri Aug 24 13:22:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:07:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 21:07:33 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Fri Aug 24 21:07:33 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.918
[Fri Aug 24 21:07:33 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 7.98"
[Sat Aug 25 02:13:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src52.ximg exists
[Sat Aug 25 02:13:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src52.csv
[Sat Aug 25 02:13:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src52_1.ximg exists
[Sat Aug 25 02:13:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src52.csv
[Sat Aug 25 02:13:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:13:51 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sat Aug 25 02:13:51 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sat Aug 25 02:13:52 2012] Fit fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Sat Aug 25 02:14:33 2012] Spatial fit model total counts = 2766.010000, observed total counts = 2762.000000
[Sat Aug 25 02:14:33 2012] Offset between fit and detection position for source 57 = 0.256372 pixels
[Sat Aug 25 02:14:33 2012] 2703.187000 total counts/ 2293.190000 bgd. counts: snr = 8.561713
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.256372 pixels
  Position = (296.7, 272.4) = 11 24 28.29 -59 19 10.9
  Extent = 9.3 (7.7-12.2)", rotation angle = 0
  Source counts = 410.0 +/- 52.0
  Background counts = 2293.2
  Rate = 0.05 +/- 0.007
[Sat Aug 25 02:14:33 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:33 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 02:14:33 2012] Source does appear to be extended
[Sat Aug 25 02:14:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 02:14:33 2012] Source is confused with source 43
[Sat Aug 25 05:26:08 2012] XMMSAS src. selection expression = ellipse(25760.181200, 23650.751600, 555.832816, 555.832816, 0.000000, X, Y)
[Sat Aug 25 05:26:08 2012] Writing source region out to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src57_src.reg
[Sat Aug 25 05:26:08 2012] Extracting stamp from image fullrun_mos2_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (265, 240) - (329, 304)
[Sat Aug 25 05:26:08 2012] XMMSAS bgd. selection expression = annulus(25760.181200, 23650.751600, 926.388027, 1852.776053, X, Y) && !ellipse(25851.100800, 27657.118000, 7047.648203, 7047.648203, 0.000000, X, Y) && !ellipse(28204.208200, 26358.380000, 2416.136070, 2416.136070, 0.000000, X, Y) && !ellipse(23194.309600, 25402.083620, 1047.488030, 1047.488030, 0.000000, X, Y) && !ellipse(23784.476685, 26057.356995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.050200, 24928.355000, 1149.400033, 821.488024, 90.000000, X, Y) && !ellipse(23088.333313, 26092.745880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.962415, 24923.729385, 1235.744036, 913.175766, 359.915022, X, Y) && !ellipse(24875.143200, 25733.502600, 437.313613, 437.313613, 0.000000, X, Y) && !ellipse(25615.868103, 25527.938843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26824.455200, 24062.284000, 1778.168051, 1507.560043, 358.649000, X, Y) && !ellipse(24626.182037, 25185.716187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.011000, 28323.162000, 7760.544223, 7760.544223, 0.000000, X, Y) && !ellipse(23822.216800, 24138.036800, 993.232029, 993.232029, 0.000000, X, Y) && !ellipse(23838.850400, 23121.112200, 754.279222, 754.279222, 0.000000, X, Y) && !ellipse(26693.755400, 22818.168000, 1267.000036, 1267.000036, 0.000000, X, Y) && !ellipse(25812.300000, 22073.514000, 1255.936036, 1255.936036, 0.000000, X, Y)
[Sat Aug 25 05:26:08 2012] Writing fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src57.gif
[Sat Aug 25 07:03:31 2012] Mean detx,y = (3397.72, -1916.49) 
[Sat Aug 25 07:03:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 07:03:48 2012] grppha failed
[Sat Aug 25 07:03:48 2012] Setting source spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src57_src.pi.gz
[Sat Aug 25 07:03:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Aug 25 07:07:05 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:05 2012] Error reading totcts from fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src57_src.pi.gz
[Sat Aug 25 07:07:06 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:09 2012] Flag c found in src. 57 procflags, skipping spectral fitting
[Sat Aug 25 07:07:09 2012] Source 57 has no response, skipping
[Sat Aug 25 07:07:10 2012] xmm0110012601/analysis//spectral/fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete