[Fri Aug 24 01:03:06 2012] Detection parameters:
  Position = (332.6, 316.5) = 11 24 7.87 -59 16 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 715.1 +/- 40.0
  Background counts = 189.7
  Rate = 0.07 +/- 0.004

[Fri Aug 24 01:03:06 2012] Off-axis axis estimate = 2.80'
[Fri Aug 24 08:20:24 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 08:20:24 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Fri Aug 24 08:20:24 2012] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.040
[Fri Aug 24 08:20:24 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 7.83"
[Fri Aug 24 13:21:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src53.ximg exists
[Fri Aug 24 13:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src53.csv
[Fri Aug 24 13:21:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri Aug 24 13:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src53.csv
[Fri Aug 24 13:21:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:21:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri Aug 24 13:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53.csv
[Fri Aug 24 13:21:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Aug 24 13:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53.csv
[Fri Aug 24 13:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:22:40 2012] Source 52 is offset by 6.740985 and 1.363752 pixels which is larger than
2 X fitted extent = 0.887747 x 0.887747, not incorporating fit results
[Fri Aug 24 13:22:40 2012] Warning, spatial fit 53 centroid is now closest to src. 37
[Fri Aug 24 13:22:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:40 2012] Assessing source extent using major
[Fri Aug 24 13:22:40 2012] Source does appear to be extended
[Fri Aug 24 13:22:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 21:07:33 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 21:07:33 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Fri Aug 24 21:07:33 2012] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.040
[Fri Aug 24 21:07:33 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 7.83"
[Sat Aug 25 02:13:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src51.ximg exists
[Sat Aug 25 02:13:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat Aug 25 02:13:50 2012] Fit fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src51 appears to have run properly
[Sat Aug 25 02:13:51 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat Aug 25 02:13:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat Aug 25 02:13:51 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat Aug 25 02:13:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat Aug 25 02:13:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:14:33 2012] Warning, spatial fit 51 centroid is now closest to src. 49
[Sat Aug 25 02:14:33 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:33 2012] Assessing source extent using major
[Sat Aug 25 02:14:33 2012] Source does appear to be extended
[Sat Aug 25 02:14:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 02:14:33 2012] Source is confused with source 20
[Sat Aug 25 02:14:33 2012] Source is confused with source 49
[Sat Aug 25 05:26:08 2012] XMMSAS src. selection expression = ellipse(28891.093658, 27484.018402, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 25 05:26:08 2012] Writing source region out to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src52_src.reg
[Sat Aug 25 05:26:08 2012] Extracting stamp from image fullrun_mos2_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (295, 279) - (370, 354)
[Sat Aug 25 05:26:08 2012] XMMSAS bgd. selection expression = annulus(28891.093658, 27484.018402, 1087.500000, 2175.000000, X, Y) && !ellipse(27673.666800, 27018.979740, 1166.184034, 1051.656030, 33.821800, X, Y) && !ellipse(25418.394000, 28389.134000, 2357.488068, 2357.488068, 0.000000, X, Y) && !ellipse(25851.100800, 27657.118000, 7047.648203, 7047.648203, 0.000000, X, Y) && !ellipse(26599.585200, 30156.434580, 1071.032031, 539.700816, 90.698176, X, Y) && !ellipse(26571.877777, 27165.945892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27640.658000, 28725.342000, 1078.952031, 1078.952031, 0.000000, X, Y) && !ellipse(25661.407000, 28634.413000, 2460.832071, 1074.168031, 66.488900, X, Y) && !ellipse(28204.208200, 26358.380000, 2416.136070, 2416.136070, 0.000000, X, Y) && !ellipse(27608.571136, 27748.021240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27649.082600, 29130.948000, 1293.424037, 1293.424037, 0.000000, X, Y) && !ellipse(27431.050200, 24928.355000, 1149.400033, 821.488024, 90.000000, X, Y) && !ellipse(28988.737200, 26210.813600, 615.405618, 438.921613, 106.805000, X, Y) && !ellipse(27028.957001, 29271.787689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.962415, 24923.729385, 1235.744036, 913.175766, 359.915022, X, Y) && !ellipse(28919.218384, 26712.201385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26824.455200, 24062.284000, 1778.168051, 1507.560043, 358.649000, X, Y) && !ellipse(27696.011000, 28323.162000, 7760.544223, 7760.544223, 0.000000, X, Y) && !ellipse(29393.240400, 29229.466000, 1172.240034, 1172.240034, 0.000000, X, Y)
[Sat Aug 25 05:26:08 2012] Writing fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src52.gif
[Sat Aug 25 07:03:10 2012] Mean detx,y = (-884.22, -4166.69) 
[Sat Aug 25 07:03:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 07:03:25 2012] grppha failed
[Sat Aug 25 07:03:25 2012] Setting source spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src52_src.pi.gz
[Sat Aug 25 07:03:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Aug 25 07:06:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 07:06:35 2012] rmf not generated due to insufficient counts
[Sat Aug 25 07:07:05 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:05 2012] Error reading totcts from fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src52_src.pi.gz
[Sat Aug 25 07:07:06 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 07:07:10 2012] xmm0110012601/analysis//spectral/fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete