[Fri Aug 24 01:03:05 2012] Detection parameters:
  Position = (333.2, 302.1) = 11 24 7.52 -59 17 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1927.0 +/- 59.4
  Background counts = 175.8
  Rate = 0.2 +/- 0.006

[Fri Aug 24 01:03:06 2012] Off-axis axis estimate = 2.54'
[Fri Aug 24 08:20:24 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 08:20:24 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Aug 24 08:20:24 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.971
[Fri Aug 24 08:20:24 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.70"
[Fri Aug 24 13:21:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src28.ximg exists
[Fri Aug 24 13:21:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Aug 24 13:21:48 2012] Fit fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src28 appears to have run properly
[Fri Aug 24 13:21:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Aug 24 13:21:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Aug 24 13:21:50 2012] Fit fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Aug 24 13:22:40 2012] Spatial fit model total counts = 7526.600000, observed total counts = 7522.000000
[Fri Aug 24 13:22:40 2012] Offset between fit and detection position for source 38 = 0.572206 pixels
[Fri Aug 24 13:22:40 2012] 7277.152000 total counts/ 6863.600000 bgd. counts: snr = 4.991765
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.572206 pixels
  Position = (333.8, 301.8) = 11 24 7.22 -59 17 2.8
  Extent = 7.7 (7.7-7.7)" x 5.5 (4.4-6.6)", rotation angle = 107 (90-133) degrees
  Source counts = 413.6 +/- 85.3
  Background counts = 6863.6
  Rate = 0.05 +/- 0.01
[Fri Aug 24 13:22:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:40 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 13:22:40 2012] Source does appear to be extended
[Fri Aug 24 13:22:40 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Fri Aug 24 13:22:40 2012] Source is confused with source 20
[Fri Aug 24 21:07:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 21:07:33 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Fri Aug 24 21:07:33 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Fri Aug 24 21:07:33 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 6.59"
[Sat Aug 25 02:13:49 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src27.ximg exists
[Sat Aug 25 02:13:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src27.csv
[Sat Aug 25 02:13:49 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Aug 25 02:13:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src27.csv
[Sat Aug 25 02:13:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:13:51 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Aug 25 02:13:51 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Aug 25 02:13:51 2012] Fit fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sat Aug 25 02:14:33 2012] Warning, spatial fit 27 centroid is now closest to src. 37
[Sat Aug 25 02:14:33 2012] Spatial fit model total counts = 7960.950000, observed total counts = 7219.000000
[Sat Aug 25 02:14:33 2012] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 02:14:33 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:33 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 02:14:33 2012] Source does appear to be extended
[Sat Aug 25 02:14:33 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Sat Aug 25 05:26:07 2012] XMMSAS src. selection expression = ellipse(28988.737200, 26210.813600, 461.554213, 329.191209, 106.805000, X, Y)
[Sat Aug 25 05:26:07 2012] Writing source region out to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src38_src.reg
[Sat Aug 25 05:26:07 2012] Extracting stamp from image fullrun_mos2_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (307, 275) - (360, 328)
[Sat Aug 25 05:26:07 2012] XMMSAS bgd. selection expression = annulus(28988.737200, 26210.813600, 769.257022, 1538.514044, X, Y) && !ellipse(27673.666800, 27018.979740, 1166.184034, 1051.656030, 33.821800, X, Y) && !ellipse(25418.394000, 28389.134000, 2357.488068, 2357.488068, 0.000000, X, Y) && !ellipse(25851.100800, 27657.118000, 7047.648203, 7047.648203, 0.000000, X, Y) && !ellipse(27640.658000, 28725.342000, 1078.952031, 1078.952031, 0.000000, X, Y) && !ellipse(25661.407000, 28634.413000, 2460.832071, 1074.168031, 66.488900, X, Y) && !ellipse(28204.208200, 26358.380000, 2416.136070, 2416.136070, 0.000000, X, Y) && !ellipse(27608.571136, 27748.021240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.050200, 24928.355000, 1149.400033, 821.488024, 90.000000, X, Y) && !ellipse(26338.962415, 24923.729385, 1235.744036, 913.175766, 359.915022, X, Y) && !ellipse(28919.218384, 26712.201385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26824.455200, 24062.284000, 1778.168051, 1507.560043, 358.649000, X, Y) && !ellipse(27696.011000, 28323.162000, 7760.544223, 7760.544223, 0.000000, X, Y) && !ellipse(28891.093658, 27484.018402, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 05:26:07 2012] Writing fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src38.gif
[Sat Aug 25 06:35:41 2012] Mean detx,y = (275.27, -4541.20) 
[Sat Aug 25 06:35:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 06:35:57 2012] grppha failed
[Sat Aug 25 06:35:57 2012] Setting source spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src38_src.pi.gz
[Sat Aug 25 06:35:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Aug 25 07:07:05 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:05 2012] Error reading totcts from fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src38_src.pi.gz
[Sat Aug 25 07:07:06 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:09 2012] Flag p found in src. 38 procflags, skipping spectral fitting
[Sat Aug 25 07:07:09 2012] Flag c found in src. 38 procflags, skipping spectral fitting
[Sat Aug 25 07:07:09 2012] Source 38 has no response, skipping
[Sat Aug 25 07:07:10 2012] xmm0110012601/analysis//spectral/fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete