[Fri Aug 24 01:03:05 2012] Detection parameters:
  Position = (333.0, 307.6) = 11 24 7.68 -59 16 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1286.3 +/- 52.0
  Background counts = 179.5
  Rate = 0.1 +/- 0.005

[Fri Aug 24 01:03:06 2012] Off-axis axis estimate = 2.59'
[Fri Aug 24 08:20:24 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 08:20:24 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Fri Aug 24 08:20:24 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.966
[Fri Aug 24 08:20:24 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.72"
[Fri Aug 24 13:21:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src37.ximg exists
[Fri Aug 24 13:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src37.csv
[Fri Aug 24 13:21:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Aug 24 13:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src37.csv
[Fri Aug 24 13:21:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:21:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Aug 24 13:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src37.csv
[Fri Aug 24 13:21:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Aug 24 13:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src37.csv
[Fri Aug 24 13:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:22:40 2012] Warning, spatial fit 37 centroid is now closest to src. 52
[Fri Aug 24 13:22:40 2012] Spatial fit model total counts = 6230.720000, observed total counts = 5592.000000
[Fri Aug 24 13:22:40 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 24 13:22:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:40 2012] Assessing source extent using major
[Fri Aug 24 13:22:40 2012] Source does appear to be extended
[Fri Aug 24 13:22:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:40 2012] Source is confused with source 38
[Fri Aug 24 21:07:33 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 21:07:33 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Fri Aug 24 21:07:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.966
[Fri Aug 24 21:07:33 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 7.72"
[Sat Aug 25 02:13:49 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src36.ximg exists
[Sat Aug 25 02:13:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src36.csv
[Sat Aug 25 02:13:49 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src36_1.ximg exists
[Sat Aug 25 02:13:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src36.csv
[Sat Aug 25 02:13:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:13:51 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sat Aug 25 02:13:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Aug 25 02:13:51 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sat Aug 25 02:13:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Aug 25 02:13:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:14:33 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 12.801102 pixels away
[Sat Aug 25 02:14:33 2012] Warning, spatial fit 36 centroid is now closest to src. 38
[Sat Aug 25 02:14:33 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:33 2012] Assessing source extent using major
[Sat Aug 25 02:14:33 2012] Source does appear to be extended
[Sat Aug 25 02:14:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 05:26:07 2012] Counts = 1286.303345, rescaling region sizes by 2.000000
[Sat Aug 25 05:26:07 2012] XMMSAS src. selection expression = ellipse(28919.218384, 26712.201385, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Aug 25 05:26:07 2012] Writing source region out to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src37_src.reg
[Sat Aug 25 05:26:07 2012] Extracting stamp from image fullrun_mos2_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (258, 233) - (408, 383)
[Sat Aug 25 05:26:07 2012] XMMSAS bgd. selection expression = annulus(28919.218384, 26712.201385, 4350.000000, 8700.000000, X, Y) && !ellipse(22786.319000, 29038.480000, 1199.784035, 1199.784035, 0.000000, X, Y) && !ellipse(27673.666800, 27018.979740, 1166.184034, 1051.656030, 33.821800, X, Y) && !ellipse(25418.394000, 28389.134000, 2357.488068, 2357.488068, 0.000000, X, Y) && !ellipse(24507.172000, 27595.750000, 362.040010, 362.040010, 0.000000, X, Y) && !ellipse(25851.100800, 27657.118000, 7047.648203, 7047.648203, 0.000000, X, Y) && !ellipse(23525.181213, 27693.863953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23981.618042, 27097.530152, 640.362692, 428.908458, 351.227616, X, Y) && !ellipse(26599.585200, 30156.434580, 1071.032031, 539.700816, 90.698176, X, Y) && !ellipse(22907.499378, 27731.731513, 1207.349044, 620.785685, 194.054462, X, Y) && !ellipse(26571.877777, 27165.945892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27640.658000, 28725.342000, 1078.952031, 1078.952031, 0.000000, X, Y) && !ellipse(25661.407000, 28634.413000, 2460.832071, 1074.168031, 66.488900, X, Y) && !ellipse(28204.208200, 26358.380000, 2416.136070, 2416.136070, 0.000000, X, Y) && !ellipse(27608.571136, 27748.021240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23194.309600, 25402.083620, 1047.488030, 1047.488030, 0.000000, X, Y) && !ellipse(27649.082600, 29130.948000, 1293.424037, 1293.424037, 0.000000, X, Y) && !ellipse(24802.672600, 28915.490000, 1451.120042, 1451.120042, 0.000000, X, Y) && !ellipse(21197.081604, 28265.223602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25410.003200, 26632.719600, 553.442416, 553.442416, 0.000000, X, Y) && !ellipse(22305.548000, 27056.681200, 594.108017, 594.108017, 0.000000, X, Y) && !ellipse(24677.538269, 28347.603851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23784.476685, 26057.356995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.050200, 24928.355000, 1149.400033, 821.488024, 90.000000, X, Y) && !ellipse(25268.578000, 31590.395800, 719.146421, 719.146421, 0.000000, X, Y) && !ellipse(23415.808000, 29075.169800, 1269.384037, 1269.384037, 0.000000, X, Y) && !ellipse(24193.946200, 31778.046800, 864.360025, 864.360025, 0.000000, X, Y) && !ellipse(28988.737200, 26210.813600, 615.405618, 438.921613, 106.805000, X, Y) && !ellipse(27028.957001, 29271.787689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26721.751526, 31172.855042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23272.925109, 31053.529585, 952.165596, 563.695495, 95.628987, X, Y) && !ellipse(23088.333313, 26092.745880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26046.888214, 30663.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.962415, 24923.729385, 1235.744036, 913.175766, 359.915022, X, Y) && !ellipse(24875.143200, 25733.502600, 437.313613, 437.313613, 0.000000, X, Y) && !ellipse(24049.533569, 31062.373962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.198000, 29656.198000, 1316.608038, 1316.608038, 0.000000, X, Y) && !ellipse(25130.447600, 30521.146600, 1335.440038, 1335.440038, 0.000000, X, Y) && !ellipse(22674.334595, 30050.229004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25615.868103, 25527.938843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23323.014000, 30518.062000, 1393.552040, 1393.552040, 0.000000, X, Y) && !ellipse(26824.455200, 24062.284000, 1778.168051, 1507.560043, 358.649000, X, Y) && !ellipse(22480.744000, 32273.240000, 1461.064042, 1461.064042, 0.000000, X, Y) && !ellipse(25724.655273, 30231.795837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25980.908081, 31364.179108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23766.128000, 31650.872000, 2743.040079, 2743.040079, 0.000000, X, Y) && !ellipse(21160.609467, 28989.143890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24626.182037, 25185.716187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.011000, 28323.162000, 7760.544223, 7760.544223, 0.000000, X, Y) && !ellipse(28891.093658, 27484.018402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25760.181200, 23650.751600, 741.110421, 741.110421, 0.000000, X, Y) && !ellipse(23822.216800, 24138.036800, 993.232029, 993.232029, 0.000000, X, Y) && !ellipse(22550.647400, 31417.792114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29393.240400, 29229.466000, 1172.240034, 1172.240034, 0.000000, X, Y) && !ellipse(23838.850400, 23121.112200, 754.279222, 754.279222, 0.000000, X, Y) && !ellipse(26693.755400, 22818.168000, 1267.000036, 1267.000036, 0.000000, X, Y) && !ellipse(25812.300000, 22073.514000, 1255.936036, 1255.936036, 0.000000, X, Y)
[Sat Aug 25 05:26:07 2012] Writing fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src37.gif
[Sat Aug 25 06:43:34 2012] Mean detx,y = (-54.97, -3998.32) 
[Sat Aug 25 06:43:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 06:44:37 2012] grppha failed
[Sat Aug 25 06:44:37 2012] Setting source spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src37_src.pi.gz
[Sat Aug 25 06:44:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Aug 25 07:06:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 07:06:33 2012] rmf not generated due to insufficient counts
[Sat Aug 25 07:07:05 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:05 2012] Error reading totcts from fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src37_src.pi.gz
[Sat Aug 25 07:07:06 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 07:07:10 2012] xmm0110012601/analysis//spectral/fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete