[Fri Aug 24 01:03:05 2012] Detection parameters:
  Position = (268.4, 358.0) = 11 24 44.28 -59 12 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1766.5 +/- 58.6
  Background counts = 247.5
  Rate = 0.2 +/- 0.006

[Fri Aug 24 01:03:06 2012] Off-axis axis estimate = 4.83'
[Fri Aug 24 08:20:24 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 08:20:24 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Fri Aug 24 08:20:24 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Fri Aug 24 08:20:24 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.84"
[Fri Aug 24 13:21:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src31.ximg exists
[Fri Aug 24 13:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src31.csv
[Fri Aug 24 13:21:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri Aug 24 13:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src31.csv
[Fri Aug 24 13:21:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:21:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri Aug 24 13:21:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Aug 24 13:21:50 2012] Fit fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Aug 24 13:22:40 2012] Spatial fit model total counts = 5778.060000, observed total counts = 5857.000000
[Fri Aug 24 13:22:40 2012] Offset between fit and detection position for source 30 = 0.300625 pixels
[Fri Aug 24 13:22:40 2012] 5627.972000 total counts/ 4968.170000 bgd. counts: snr = 9.360853
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.300625 pixels
  Position = (268.1, 357.9) = 11 24 44.45 -59 12 58.9
  Extent = 8.2 (7.3-9.4)", rotation angle = 0
  Source counts = 659.8 +/- 75.0
  Background counts = 4968.2
  Rate = 0.09 +/- 0.01
[Fri Aug 24 13:22:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:40 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 13:22:40 2012] Source does appear to be extended
[Fri Aug 24 13:22:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:40 2012] Source is confused with source 32
[Fri Aug 24 21:07:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 21:07:33 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Fri Aug 24 21:07:33 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.885
[Fri Aug 24 21:07:33 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.17"
[Sat Aug 25 02:13:49 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src30.ximg exists
[Sat Aug 25 02:13:49 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Aug 25 02:13:49 2012] Fit fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src30 appears to have run properly
[Sat Aug 25 02:13:51 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Aug 25 02:13:51 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Aug 25 02:13:51 2012] Fit fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Aug 25 02:14:33 2012] Spatial fit model total counts = 5885.520000, observed total counts = 5857.000000
[Sat Aug 25 02:14:33 2012] Offset between fit and detection position for source 30 = 0.419861 pixels
[Sat Aug 25 02:14:33 2012] 5887.041000 total counts/ 5088.250000 bgd. counts: snr = 11.198219
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.419861 pixels
  Position = (268.1, 357.5) = 11 24 44.49 -59 13 0.7
  Extent = 11.9" x 7.0", rotation angle = 96
  Source counts = 798.8 +/- 76.7
  Background counts = 5088.2
  Rate = 0.1 +/- 0.01
[Sat Aug 25 02:14:33 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:33 2012] Assessing source extent using major
[Sat Aug 25 02:14:33 2012] Source does appear to be extended
[Sat Aug 25 02:14:33 2012] Computing asymmetry using major and minor axis, asym = 1.69
[Sat Aug 25 02:14:33 2012] Source is asymmetric
[Sat Aug 25 05:26:07 2012] XMMSAS src. selection expression = ellipse(23272.925109, 31053.529585, 714.124197, 422.771621, 95.628987, X, Y)
[Sat Aug 25 05:26:07 2012] Writing source region out to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src30_src.reg
[Sat Aug 25 05:26:07 2012] Extracting stamp from image fullrun_mos2_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (227, 316) - (309, 399)
[Sat Aug 25 05:26:07 2012] XMMSAS bgd. selection expression = annulus(23272.925109, 31053.529585, 1190.206996, 2380.413991, X, Y) && !ellipse(22786.319000, 29038.480000, 1199.784035, 1199.784035, 0.000000, X, Y) && !ellipse(25418.394000, 28389.134000, 2357.488068, 2357.488068, 0.000000, X, Y) && !ellipse(25851.100800, 27657.118000, 7047.648203, 7047.648203, 0.000000, X, Y) && !ellipse(26599.585200, 30156.434580, 1071.032031, 539.700816, 90.698176, X, Y) && !ellipse(22907.499378, 27731.731513, 1207.349044, 620.785685, 194.054462, X, Y) && !ellipse(25661.407000, 28634.413000, 2460.832071, 1074.168031, 66.488900, X, Y) && !ellipse(24802.672600, 28915.490000, 1451.120042, 1451.120042, 0.000000, X, Y) && !ellipse(21197.081604, 28265.223602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24677.538269, 28347.603851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25268.578000, 31590.395800, 719.146421, 719.146421, 0.000000, X, Y) && !ellipse(23415.808000, 29075.169800, 1269.384037, 1269.384037, 0.000000, X, Y) && !ellipse(24193.946200, 31778.046800, 864.360025, 864.360025, 0.000000, X, Y) && !ellipse(26046.888214, 30663.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24049.533569, 31062.373962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.198000, 29656.198000, 1316.608038, 1316.608038, 0.000000, X, Y) && !ellipse(25130.447600, 30521.146600, 1335.440038, 1335.440038, 0.000000, X, Y) && !ellipse(22674.334595, 30050.229004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23323.014000, 30518.062000, 1393.552040, 1393.552040, 0.000000, X, Y) && !ellipse(22480.744000, 32273.240000, 1461.064042, 1461.064042, 0.000000, X, Y) && !ellipse(25724.655273, 30231.795837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25980.908081, 31364.179108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23766.128000, 31650.872000, 2743.040079, 2743.040079, 0.000000, X, Y) && !ellipse(21160.609467, 28989.143890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.011000, 28323.162000, 7760.544223, 7760.544223, 0.000000, X, Y) && !ellipse(22550.647400, 31417.792114, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 05:26:07 2012] Writing fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src30.gif
[Sat Aug 25 06:37:59 2012] Mean detx,y = (-3298.88, 1966.61) 
[Sat Aug 25 06:38:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 06:38:16 2012] grppha failed
[Sat Aug 25 06:38:17 2012] Setting source spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src30_src.pi.gz
[Sat Aug 25 06:38:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Aug 25 07:07:05 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:05 2012] Error reading totcts from fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src30_src.pi.gz
[Sat Aug 25 07:07:06 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:09 2012] Flag c found in src. 30 procflags, skipping spectral fitting
[Sat Aug 25 07:07:09 2012] Source 30 has no response, skipping
[Sat Aug 25 07:07:10 2012] xmm0110012601/analysis//spectral/fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete