[Fri Aug 24 01:03:05 2012] Detection parameters:
  Position = (262.2, 320.9) = 11 24 47.82 -59 15 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4188.4 +/- 85.7
  Background counts = 292.1
  Rate = 0.4 +/- 0.009

[Fri Aug 24 01:03:06 2012] Off-axis axis estimate = 3.09'
[Fri Aug 24 08:20:24 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 08:20:24 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Fri Aug 24 08:20:24 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919
[Fri Aug 24 08:20:24 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.97"
[Fri Aug 24 13:21:47 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src9.ximg exists
[Fri Aug 24 13:21:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src9.csv
[Fri Aug 24 13:21:47 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Aug 24 13:21:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src9.csv
[Fri Aug 24 13:21:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:21:49 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Aug 24 13:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri Aug 24 13:21:49 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Aug 24 13:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri Aug 24 13:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:22:40 2012] Warning, spatial fit 9 centroid is now closest to src. 3
[Fri Aug 24 13:22:40 2012] Spatial fit model total counts = 9882.360000, observed total counts = 9869.000000
[Fri Aug 24 13:22:40 2012] Offset between fit and detection position for source 15 = 2.269047 pixels
[Fri Aug 24 13:22:40 2012] Warning, changing simple spatial fit ID from 9 to 21
[Fri Aug 24 13:22:40 2012] 10151.454000 total counts/ 9403.670000 bgd. counts: snr = 7.711298
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.269047 pixels
  Position = (263.9, 319.3) = 11 24 46.90 -59 15 46.8
  Extent = 15.1" x 7.8", rotation angle = 194
  Source counts = 747.8 +/- 100.8
  Background counts = 9403.7
  Rate = 0.1 +/- 0.01
[Fri Aug 24 13:22:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:40 2012] Assessing source extent using major
[Fri Aug 24 13:22:40 2012] Source does appear to be extended
[Fri Aug 24 13:22:40 2012] Computing asymmetry using major and minor axis, asym = 1.94
[Fri Aug 24 13:22:40 2012] Source is asymmetric
[Fri Aug 24 13:22:40 2012] Source is confused with source 3
[Fri Aug 24 21:07:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 21:07:33 2012] Initial guess for spatial extent in simple fitting = 11.43"
[Fri Aug 24 21:07:33 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.921
[Fri Aug 24 21:07:33 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.43"
[Sat Aug 25 02:13:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src9.ximg exists
[Sat Aug 25 02:13:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src9.csv
[Sat Aug 25 02:13:48 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Aug 25 02:13:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src9.csv
[Sat Aug 25 02:13:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:13:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Aug 25 02:13:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Aug 25 02:13:50 2012] fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Aug 25 02:13:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Aug 25 02:13:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:14:33 2012] Warning, spatial fit 9 centroid is now closest to src. 18
[Sat Aug 25 02:14:33 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:33 2012] Assessing source extent using major
[Sat Aug 25 02:14:33 2012] Source does appear to be extended
[Sat Aug 25 02:14:33 2012] Computing asymmetry using major and minor axis, asym = 1.94
[Sat Aug 25 02:14:33 2012] Source is asymmetric
[Sat Aug 25 05:26:05 2012] XMMSAS src. selection expression = ellipse(22907.499378, 27731.731513, 905.511783, 465.589264, 194.054462, X, Y)
[Sat Aug 25 05:26:05 2012] Writing source region out to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src15_src.reg
[Sat Aug 25 05:26:05 2012] Extracting stamp from image fullrun_mos2_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (212, 267) - (316, 371)
[Sat Aug 25 05:26:05 2012] XMMSAS bgd. selection expression = annulus(22907.499378, 27731.731513, 1509.186304, 3018.372609, X, Y) && !ellipse(22786.319000, 29038.480000, 1199.784035, 1199.784035, 0.000000, X, Y) && !ellipse(25418.394000, 28389.134000, 2357.488068, 2357.488068, 0.000000, X, Y) && !ellipse(24507.172000, 27595.750000, 362.040010, 362.040010, 0.000000, X, Y) && !ellipse(25851.100800, 27657.118000, 7047.648203, 7047.648203, 0.000000, X, Y) && !ellipse(23525.181213, 27693.863953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23981.618042, 27097.530152, 640.362692, 428.908458, 351.227616, X, Y) && !ellipse(26599.585200, 30156.434580, 1071.032031, 539.700816, 90.698176, X, Y) && !ellipse(26571.877777, 27165.945892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25661.407000, 28634.413000, 2460.832071, 1074.168031, 66.488900, X, Y) && !ellipse(28204.208200, 26358.380000, 2416.136070, 2416.136070, 0.000000, X, Y) && !ellipse(23194.309600, 25402.083620, 1047.488030, 1047.488030, 0.000000, X, Y) && !ellipse(24802.672600, 28915.490000, 1451.120042, 1451.120042, 0.000000, X, Y) && !ellipse(21197.081604, 28265.223602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25410.003200, 26632.719600, 553.442416, 553.442416, 0.000000, X, Y) && !ellipse(22305.548000, 27056.681200, 594.108017, 594.108017, 0.000000, X, Y) && !ellipse(24677.538269, 28347.603851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23784.476685, 26057.356995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23415.808000, 29075.169800, 1269.384037, 1269.384037, 0.000000, X, Y) && !ellipse(26721.751526, 31172.855042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23272.925109, 31053.529585, 952.165596, 563.695495, 95.628987, X, Y) && !ellipse(23088.333313, 26092.745880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26046.888214, 30663.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.962415, 24923.729385, 1235.744036, 913.175766, 359.915022, X, Y) && !ellipse(24875.143200, 25733.502600, 437.313613, 437.313613, 0.000000, X, Y) && !ellipse(24049.533569, 31062.373962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.198000, 29656.198000, 1316.608038, 1316.608038, 0.000000, X, Y) && !ellipse(25130.447600, 30521.146600, 1335.440038, 1335.440038, 0.000000, X, Y) && !ellipse(22674.334595, 30050.229004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25615.868103, 25527.938843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23323.014000, 30518.062000, 1393.552040, 1393.552040, 0.000000, X, Y) && !ellipse(26824.455200, 24062.284000, 1778.168051, 1507.560043, 358.649000, X, Y) && !ellipse(25724.655273, 30231.795837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25980.908081, 31364.179108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23766.128000, 31650.872000, 2743.040079, 2743.040079, 0.000000, X, Y) && !ellipse(21160.609467, 28989.143890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24626.182037, 25185.716187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.011000, 28323.162000, 7760.544223, 7760.544223, 0.000000, X, Y) && !ellipse(23822.216800, 24138.036800, 993.232029, 993.232029, 0.000000, X, Y) && !ellipse(22550.647400, 31417.792114, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 05:26:05 2012] Writing fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src15.gif
[Sat Aug 25 05:49:00 2012] Mean detx,y = (-11.33, 1616.59) 
[Sat Aug 25 05:49:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 05:49:24 2012] grppha failed
[Sat Aug 25 05:49:24 2012] Setting source spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src15_src.pi.gz
[Sat Aug 25 05:49:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Aug 25 07:07:04 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:04 2012] Error reading totcts from fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src15_src.pi.gz
[Sat Aug 25 07:07:06 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:09 2012] Flag c found in src. 15 procflags, skipping spectral fitting
[Sat Aug 25 07:07:09 2012] Source 15 has no response, skipping
[Sat Aug 25 07:07:10 2012] xmm0110012601/analysis//spectral/fullrun_mos2_xmm0110012601_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete