[Fri Aug 24 01:02:23 2012] Detection parameters:
  Position = (263.2, 334.0) = 11 24 47.25 -59 14 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7926.1 +/- 110.8
  Background counts = 329.1
  Rate = 0.8 +/- 0.01

[Fri Aug 24 01:02:25 2012] Off-axis axis estimate = 3.63'
[Fri Aug 24 04:47:46 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 04:47:46 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Fri Aug 24 04:47:46 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Fri Aug 24 04:47:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.24"
[Fri Aug 24 08:20:20 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 24 08:20:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src1.csv
[Fri Aug 24 08:20:20 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 24 08:20:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src1.csv
[Fri Aug 24 08:20:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 08:20:22 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 24 08:20:22 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 24 08:20:22 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 24 13:22:25 2012] Spatial fit model total counts = 16895.800000, observed total counts = 17090.000000
[Fri Aug 24 13:22:25 2012] Offset between fit and detection position for source 8 = 1.522786 pixels
[Fri Aug 24 13:22:25 2012] 16317.430000 total counts/ 9689.510000 bgd. counts: snr = 67.332750
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.522786 pixels
  Position = (261.8, 334.6) = 11 24 48.05 -59 14 40.1
  Extent = 14.2 (13.3-15.1)", rotation angle = 0
  Source counts = 6627.9 +/- 127.7
  Background counts = 9689.5
  Rate = 0.8 +/- 0.02
[Fri Aug 24 13:22:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:25 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 13:22:25 2012] Source does appear to be extended
[Fri Aug 24 13:22:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 16:47:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 16:47:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 24 16:47:27 2012] Initial guess for spatial extent in simple fitting = 14.22"
[Fri Aug 24 16:47:27 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.986
[Fri Aug 24 16:47:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.22"
[Fri Aug 24 21:07:30 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 24 21:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src1.csv
[Fri Aug 24 21:07:30 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 24 21:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src1.csv
[Fri Aug 24 21:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 21:07:31 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 24 21:07:31 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 24 21:07:31 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 25 02:14:21 2012] Spatial fit model total counts = 32829.700000, observed total counts = 32888.000000
[Sat Aug 25 02:14:21 2012] Offset between fit and detection position for source 8 = 0.463895 pixels
[Sat Aug 25 02:14:21 2012] 32053.810000 total counts/ 23536.900000 bgd. counts: snr = 55.514627
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.463895 pixels
  Position = (261.4, 334.5) = 11 24 48.30 -59 14 40.6
  Extent = 16.7 (16.2-17.3)", rotation angle = 0
  Source counts = 8516.9 +/- 179.0
  Background counts = 23536.9
  Rate = 1 +/- 0.02
[Sat Aug 25 02:14:21 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:21 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 02:14:21 2012] Source does appear to be extended
[Sat Aug 25 02:14:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 03:43:17 2012] Counts = 8516.910000, rescaling region sizes by 2.000000
[Sat Aug 25 03:43:17 2012] XMMSAS src. selection expression = ellipse(22690.172800, 29055.467600, 1999.824058, 1999.824058, 0.000000, X, Y)
[Sat Aug 25 03:43:17 2012] Writing source region out to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src8_src.reg
[Sat Aug 25 03:43:17 2012] Extracting stamp from image fullrun_mos1_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (146, 220) - (376, 449)
[Sat Aug 25 03:43:17 2012] XMMSAS bgd. selection expression = annulus(22690.172800, 29055.467600, 6666.080192, 13332.160384, X, Y) && !ellipse(25685.390000, 27722.510800, 1623.944047, 964.648028, 5.135560, X, Y) && !ellipse(24588.028800, 27826.373000, 1176.960034, 1176.960034, 0.000000, X, Y) && !ellipse(23463.270000, 27752.213800, 1218.176035, 1218.176035, 0.000000, X, Y) && !ellipse(27774.507400, 26898.490000, 1171.976034, 1171.976034, 0.000000, X, Y) && !ellipse(23994.827600, 27132.553600, 577.136017, 577.136017, 0.000000, X, Y) && !ellipse(22662.585600, 27921.735400, 953.056027, 587.660817, 90.000000, X, Y) && !ellipse(26491.158000, 30380.304000, 412.055212, 412.055212, 0.000000, X, Y) && !ellipse(25740.024000, 28737.990000, 1230.440035, 842.920024, 47.747000, X, Y) && !ellipse(27642.724817, 28797.275832, 1230.440035, 720.726798, 90.000000, X, Y) && !ellipse(25521.386230, 28917.742188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.566200, 26689.638000, 1171.976034, 1171.976034, 0.000000, X, Y) && !ellipse(23239.156000, 25414.156000, 677.423219, 677.423219, 0.000000, X, Y) && !ellipse(27008.043335, 28139.669922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21301.692400, 28186.787600, 729.517621, 729.517621, 0.000000, X, Y) && !ellipse(27648.730340, 28660.052000, 1464.640042, 1464.640042, 0.000000, X, Y) && !ellipse(22280.634600, 27046.944200, 717.424021, 717.424021, 0.000000, X, Y) && !ellipse(25630.886000, 26472.114000, 1015.232029, 1015.232029, 0.000000, X, Y) && !ellipse(24586.372600, 28877.324600, 1244.168036, 1244.168036, 0.000000, X, Y) && !ellipse(27434.960600, 24990.988460, 1138.416033, 1138.416033, 0.000000, X, Y) && !ellipse(23843.358000, 25923.738000, 640.284818, 640.284818, 0.000000, X, Y) && !ellipse(25128.887800, 31603.255400, 993.304029, 993.304029, 0.000000, X, Y) && !ellipse(27873.006744, 27968.075378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24218.939000, 31730.682000, 1052.592030, 1052.592030, 0.000000, X, Y) && !ellipse(23254.329720, 31018.064400, 617.155218, 617.155218, 0.000000, X, Y) && !ellipse(28986.876495, 26310.506073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23138.964800, 25430.712000, 1217.216035, 1217.216035, 0.000000, X, Y) && !ellipse(27049.201599, 29273.290436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26321.084000, 24998.916000, 579.037617, 579.037617, 0.000000, X, Y) && !ellipse(29064.233400, 26902.795840, 645.395219, 645.395219, 0.000000, X, Y) && !ellipse(24539.062000, 29907.830000, 1061.144031, 1061.144031, 0.000000, X, Y) && !ellipse(20701.000000, 28515.016724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24854.522522, 25708.544556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25356.129242, 30574.076904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20787.743790, 29002.180084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24068.928558, 31192.204895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26675.068000, 24332.620000, 703.361620, 703.361620, 0.000000, X, Y) && !ellipse(24447.208000, 30225.853400, 647.039219, 647.039219, 0.000000, X, Y) && !ellipse(27448.417114, 30569.056244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24742.777649, 26137.440643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.512000, 24840.940000, 976.384028, 976.384028, 0.000000, X, Y) && !ellipse(25786.583832, 25443.822205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26331.586000, 31305.026000, 1403.056040, 1403.056040, 0.000000, X, Y) && !ellipse(24680.872986, 30831.678467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26959.273102, 30999.486938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24826.607544, 25185.740082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27526.313019, 31082.260132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25776.794140, 23587.029200, 641.188018, 641.188018, 0.000000, X, Y) && !ellipse(24431.366608, 25269.702728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22264.700745, 25635.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23908.699000, 23130.226000, 824.456024, 824.456024, 0.000000, X, Y) && !ellipse(29447.623400, 29267.783200, 1190.896034, 1190.896034, 0.000000, X, Y) && !ellipse(22388.130402, 31111.229156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29351.003143, 28393.578339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28804.120000, 24739.280240, 1266.376036, 1266.376036, 0.000000, X, Y) && !ellipse(22018.376419, 30738.332947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8208.200000, 25256.034000, 2183.312063, 2183.312063, 0.000000, X, Y)
[Sat Aug 25 03:43:17 2012] Writing fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src8.gif
[Sat Aug 25 03:43:34 2012] Mean detx,y = (2063.58, 823.86) 
[Sat Aug 25 03:43:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 03:47:57 2012] grppha failed
[Sat Aug 25 03:47:57 2012] Setting source spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src8_src.pi.gz
[Sat Aug 25 03:47:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Aug 25 07:07:03 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:03 2012] Error reading totcts from fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src8_src.pi.gz
[Sat Aug 25 07:07:04 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:07 2012] Source 8 has no response, skipping
[Sat Aug 25 07:07:08 2012] xmm0110012601/analysis//spectral/fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete