[Fri Aug 24 01:02:24 2012] Detection parameters:
  Position = (297.9, 363.0) = 11 24 27.57 -59 12 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 839.8 +/- 45.9
  Background counts = 262.3
  Rate = 0.08 +/- 0.004

[Fri Aug 24 01:02:25 2012] Off-axis axis estimate = 4.68'
[Fri Aug 24 04:47:46 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 04:47:46 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Fri Aug 24 04:47:46 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.185
[Fri Aug 24 04:47:46 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 8.77"
[Fri Aug 24 08:20:22 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src46.ximg exists
[Fri Aug 24 08:20:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src46.csv
[Fri Aug 24 08:20:22 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src46_1.ximg exists
[Fri Aug 24 08:20:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src46.csv
[Fri Aug 24 08:20:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 08:20:24 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Fri Aug 24 08:20:24 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Fri Aug 24 08:20:24 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Fri Aug 24 13:22:25 2012] Source 66 is offset by 0.801498 and -9.115036 pixels which is larger than
2 X fitted extent = 8.115494 x 8.115494, not incorporating fit results
[Fri Aug 24 13:22:25 2012] Source 66 is offset by -1.792065 and 2.291400 pixels which is larger than
2 X fitted extent = 0.963632 x 0.963632, not incorporating fit results
[Fri Aug 24 13:22:25 2012] Warning, spatial fit 46 centroid is now closest to src. 25
[Fri Aug 24 13:22:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:25 2012] Assessing source extent using major
[Fri Aug 24 13:22:25 2012] Source does appear to be extended
[Fri Aug 24 13:22:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:25 2012] Source is confused with source 25
[Fri Aug 24 16:47:27 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 16:47:27 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Fri Aug 24 16:47:27 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.185
[Fri Aug 24 16:47:27 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 8.77"
[Fri Aug 24 21:07:31 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src45.ximg exists
[Fri Aug 24 21:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src45.csv
[Fri Aug 24 21:07:31 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri Aug 24 21:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src45.csv
[Fri Aug 24 21:07:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 21:07:32 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri Aug 24 21:07:32 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri Aug 24 21:07:32 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Sat Aug 25 02:14:21 2012] Source 66 is offset by -0.876019 and 3.207446 pixels which is larger than
2 X fitted extent = 1.974129 x 1.974129, not incorporating fit results
[Sat Aug 25 02:14:21 2012] Spatial fit model total counts = 6076.800000, observed total counts = 6075.000000
[Sat Aug 25 02:14:21 2012] Offset between fit and detection position for source 66 = 5.912196 pixels
[Sat Aug 25 02:14:21 2012] 4513.243000 total counts/ 3856.930000 bgd. counts: snr = 10.567935
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 5.912196 pixels
  Position = (303.2, 360.4) = 11 24 24.57 -59 12 48.2
  Extent = 17.5 (17.5-35.1)", rotation angle = 0
  Source counts = 656.3 +/- 67.2
  Background counts = 3856.9
  Rate = 0.08 +/- 0.009
[Sat Aug 25 02:14:21 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:21 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 02:14:21 2012] Source does appear to be extended
[Sat Aug 25 02:14:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 03:43:20 2012] XMMSAS src. selection expression = ellipse(26331.586000, 31305.026000, 1052.292030, 1052.292030, 0.000000, X, Y)
[Sat Aug 25 03:43:20 2012] Writing source region out to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src66_src.reg
[Sat Aug 25 03:43:20 2012] Extracting stamp from image fullrun_mos1_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (243, 300) - (364, 421)
[Sat Aug 25 03:43:20 2012] XMMSAS bgd. selection expression = annulus(26331.586000, 31305.026000, 1753.820050, 3507.640101, X, Y) && !ellipse(22690.172800, 29055.467600, 1333.216038, 1333.216038, 0.000000, X, Y) && !ellipse(25685.390000, 27722.510800, 1623.944047, 964.648028, 5.135560, X, Y) && !ellipse(24588.028800, 27826.373000, 1176.960034, 1176.960034, 0.000000, X, Y) && !ellipse(23463.270000, 27752.213800, 1218.176035, 1218.176035, 0.000000, X, Y) && !ellipse(27774.507400, 26898.490000, 1171.976034, 1171.976034, 0.000000, X, Y) && !ellipse(22662.585600, 27921.735400, 953.056027, 587.660817, 90.000000, X, Y) && !ellipse(26491.158000, 30380.304000, 412.055212, 412.055212, 0.000000, X, Y) && !ellipse(25740.024000, 28737.990000, 1230.440035, 842.920024, 47.747000, X, Y) && !ellipse(27642.724817, 28797.275832, 1230.440035, 720.726798, 90.000000, X, Y) && !ellipse(25521.386230, 28917.742188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.566200, 26689.638000, 1171.976034, 1171.976034, 0.000000, X, Y) && !ellipse(27008.043335, 28139.669922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27648.730340, 28660.052000, 1464.640042, 1464.640042, 0.000000, X, Y) && !ellipse(24586.372600, 28877.324600, 1244.168036, 1244.168036, 0.000000, X, Y) && !ellipse(25128.887800, 31603.255400, 993.304029, 993.304029, 0.000000, X, Y) && !ellipse(27873.006744, 27968.075378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24218.939000, 31730.682000, 1052.592030, 1052.592030, 0.000000, X, Y) && !ellipse(23254.329720, 31018.064400, 617.155218, 617.155218, 0.000000, X, Y) && !ellipse(27049.201599, 29273.290436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24539.062000, 29907.830000, 1061.144031, 1061.144031, 0.000000, X, Y) && !ellipse(25356.129242, 30574.076904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24068.928558, 31192.204895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24447.208000, 30225.853400, 647.039219, 647.039219, 0.000000, X, Y) && !ellipse(27448.417114, 30569.056244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24680.872986, 30831.678467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26959.273102, 30999.486938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27526.313019, 31082.260132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29447.623400, 29267.783200, 1190.896034, 1190.896034, 0.000000, X, Y) && !ellipse(22388.130402, 31111.229156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29351.003143, 28393.578339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22018.376419, 30738.332947, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 03:43:20 2012] Writing fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src66.gif
[Sat Aug 25 05:20:14 2012] Mean detx,y = (-777.14, 3781.53) 
[Sat Aug 25 05:20:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 05:20:43 2012] grppha failed
[Sat Aug 25 05:20:43 2012] Setting source spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src66_src.pi.gz
[Sat Aug 25 05:20:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Sat Aug 25 07:07:04 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:04 2012] Error reading totcts from fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src66_src.pi.gz
[Sat Aug 25 07:07:04 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:07 2012] Flag b found in src. 66 procflags, skipping spectral fitting
[Sat Aug 25 07:07:07 2012] Flag c found in src. 66 procflags, skipping spectral fitting
[Sat Aug 25 07:07:07 2012] Source 66 has no response, skipping
[Sat Aug 25 07:07:09 2012] xmm0110012601/analysis//spectral/fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src66_pl.csv not found, spectral fit skipped or did not complete