[Fri Aug 24 01:02:24 2012] Detection parameters:
  Position = (290.2, 287.1) = 11 24 31.97 -59 18 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 868.5 +/- 46.0
  Background counts = 243.2
  Rate = 0.09 +/- 0.005

[Fri Aug 24 01:02:25 2012] Off-axis axis estimate = 1.02'
[Fri Aug 24 04:47:46 2012] Using EEF radius (= 6.94 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 04:47:46 2012] Initial guess for spatial extent in simple fitting = 6.94"
[Fri Aug 24 04:47:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.911
[Fri Aug 24 04:47:46 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 6.94"
[Fri Aug 24 08:20:22 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src44.ximg exists
[Fri Aug 24 08:20:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src44.csv
[Fri Aug 24 08:20:22 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src44_1.ximg exists
[Fri Aug 24 08:20:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src44.csv
[Fri Aug 24 08:20:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 08:20:24 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Fri Aug 24 08:20:24 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Fri Aug 24 08:20:24 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Fri Aug 24 13:22:25 2012] Spatial fit model total counts = 5311.560000, observed total counts = 5317.000000
[Fri Aug 24 13:22:25 2012] Offset between fit and detection position for source 44 = 2.011180 pixels
[Fri Aug 24 13:22:25 2012] 5411.586000 total counts/ 5088.590000 bgd. counts: snr = 4.527917
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 2.011180 pixels
  Position = (291.8, 285.9) = 11 24 31.06 -59 18 12.4
  Extent = 12.4 (9.3-13.9)", rotation angle = 0
  Source counts = 323.0 +/- 73.6
  Background counts = 5088.6
  Rate = 0.04 +/- 0.009
[Fri Aug 24 13:22:25 2012] Spatial fit model total counts = 5857.530000, observed total counts = 5842.000000
[Fri Aug 24 13:22:25 2012] Offset between fit and detection position for source 44 = 0.907577 pixels
[Fri Aug 24 13:22:25 2012] Warning, changing simple spatial fit ID from 44 to 49
[Fri Aug 24 13:22:25 2012] 5939.306000 total counts/ 5536.250000 bgd. counts: snr = 5.416984
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.907577 pixels
  Position = (290.9, 286.1) = 11 24 31.56 -59 18 11.4
  Extent = 12.2 (8.8-13.9)", rotation angle = 0
  Source counts = 403.1 +/- 77.1
  Background counts = 5536.2
  Rate = 0.05 +/- 0.01
[Fri Aug 24 13:22:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:25 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 13:22:25 2012] Source does appear to be extended
[Fri Aug 24 13:22:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:25 2012] Source is confused with source 59
[Fri Aug 24 16:47:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 16:47:27 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Fri Aug 24 16:47:27 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.824
[Fri Aug 24 16:47:27 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 12.20"
[Fri Aug 24 21:07:31 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src43.ximg exists
[Fri Aug 24 21:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src43.csv
[Fri Aug 24 21:07:31 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri Aug 24 21:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src43.csv
[Fri Aug 24 21:07:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 21:07:32 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri Aug 24 21:07:32 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri Aug 24 21:07:32 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Sat Aug 25 02:14:21 2012] Warning, spatial fit 43 centroid is now closest to src. 39
[Sat Aug 25 02:14:21 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:21 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 02:14:21 2012] Source does appear to be extended
[Sat Aug 25 02:14:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 03:43:20 2012] XMMSAS src. selection expression = ellipse(25259.512000, 24840.940000, 732.288021, 732.288021, 0.000000, X, Y)
[Sat Aug 25 03:43:20 2012] Writing source region out to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src44_src.reg
[Sat Aug 25 03:43:20 2012] Extracting stamp from image fullrun_mos1_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (249, 244) - (333, 328)
[Sat Aug 25 03:43:20 2012] XMMSAS bgd. selection expression = annulus(25259.512000, 24840.940000, 1220.480035, 2440.960070, X, Y) && !ellipse(25685.390000, 27722.510800, 1623.944047, 964.648028, 5.135560, X, Y) && !ellipse(24588.028800, 27826.373000, 1176.960034, 1176.960034, 0.000000, X, Y) && !ellipse(23463.270000, 27752.213800, 1218.176035, 1218.176035, 0.000000, X, Y) && !ellipse(27774.507400, 26898.490000, 1171.976034, 1171.976034, 0.000000, X, Y) && !ellipse(23994.827600, 27132.553600, 577.136017, 577.136017, 0.000000, X, Y) && !ellipse(22662.585600, 27921.735400, 953.056027, 587.660817, 90.000000, X, Y) && !ellipse(27875.566200, 26689.638000, 1171.976034, 1171.976034, 0.000000, X, Y) && !ellipse(23239.156000, 25414.156000, 677.423219, 677.423219, 0.000000, X, Y) && !ellipse(27008.043335, 28139.669922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27648.730340, 28660.052000, 1464.640042, 1464.640042, 0.000000, X, Y) && !ellipse(22280.634600, 27046.944200, 717.424021, 717.424021, 0.000000, X, Y) && !ellipse(25630.886000, 26472.114000, 1015.232029, 1015.232029, 0.000000, X, Y) && !ellipse(27434.960600, 24990.988460, 1138.416033, 1138.416033, 0.000000, X, Y) && !ellipse(23843.358000, 25923.738000, 640.284818, 640.284818, 0.000000, X, Y) && !ellipse(27873.006744, 27968.075378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23138.964800, 25430.712000, 1217.216035, 1217.216035, 0.000000, X, Y) && !ellipse(26321.084000, 24998.916000, 579.037617, 579.037617, 0.000000, X, Y) && !ellipse(24854.522522, 25708.544556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26675.068000, 24332.620000, 703.361620, 703.361620, 0.000000, X, Y) && !ellipse(24742.777649, 26137.440643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25786.583832, 25443.822205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24826.607544, 25185.740082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25776.794140, 23587.029200, 641.188018, 641.188018, 0.000000, X, Y) && !ellipse(24431.366608, 25269.702728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22264.700745, 25635.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23908.699000, 23130.226000, 824.456024, 824.456024, 0.000000, X, Y) && !ellipse(28804.120000, 24739.280240, 1266.376036, 1266.376036, 0.000000, X, Y)
[Sat Aug 25 03:43:20 2012] Writing fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src44.gif
[Sat Aug 25 05:19:41 2012] Mean detx,y = (-979.10, -2482.77) 
[Sat Aug 25 05:19:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 05:19:51 2012] grppha failed
[Sat Aug 25 05:19:51 2012] Setting source spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src44_src.pi.gz
[Sat Aug 25 05:19:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Aug 25 07:07:04 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:04 2012] Error reading totcts from fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src44_src.pi.gz
[Sat Aug 25 07:07:04 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:07 2012] Flag c found in src. 44 procflags, skipping spectral fitting
[Sat Aug 25 07:07:07 2012] Source 44 has no response, skipping
[Sat Aug 25 07:07:09 2012] xmm0110012601/analysis//spectral/fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete