[Fri Aug 24 01:02:23 2012] Detection parameters:
  Position = (283.0, 343.0) = 11 24 36.02 -59 14 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1382.0 +/- 58.6
  Background counts = 393.0
  Rate = 0.1 +/- 0.005

[Fri Aug 24 01:02:25 2012] Off-axis axis estimate = 3.42'
[Fri Aug 24 04:47:46 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 04:47:46 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Fri Aug 24 04:47:46 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.712
[Fri Aug 24 04:47:46 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 8.14"
[Fri Aug 24 08:20:21 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src34.ximg exists
[Fri Aug 24 08:20:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src34.csv
[Fri Aug 24 08:20:21 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src34_1.ximg exists
[Fri Aug 24 08:20:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src34.csv
[Fri Aug 24 08:20:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 08:20:23 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Fri Aug 24 08:20:23 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Aug 24 08:20:23 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Fri Aug 24 13:22:25 2012] Warning, spatial fit 34 centroid is now closest to src. 10
[Fri Aug 24 13:22:25 2012] Source 33 is offset by 1.193178 and -5.973225 pixels which is larger than
2 X fitted extent = 3.927099 x 3.927099, not incorporating fit results
[Fri Aug 24 13:22:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:25 2012] Assessing source extent using major
[Fri Aug 24 13:22:25 2012] Source does appear to be extended
[Fri Aug 24 13:22:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:25 2012] Source is confused with source 12
[Fri Aug 24 16:47:27 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 16:47:27 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Fri Aug 24 16:47:27 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.712
[Fri Aug 24 16:47:27 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 8.14"
[Fri Aug 24 21:07:30 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src33.ximg exists
[Fri Aug 24 21:07:30 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri Aug 24 21:07:30 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src33 appears to have run properly
[Fri Aug 24 21:07:32 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri Aug 24 21:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri Aug 24 21:07:32 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Aug 24 21:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri Aug 24 21:07:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 02:14:21 2012] Source 33 is offset by -4.197042 and -4.165546 pixels which is larger than
2 X fitted extent = 1.787595 x 1.787595, not incorporating fit results
[Sat Aug 25 02:14:21 2012] Warning, spatial fit 33 centroid is now closest to src. 66
[Sat Aug 25 02:14:21 2012] Spatial fit model total counts = 7652.680000, observed total counts = 7646.000000
[Sat Aug 25 02:14:21 2012] Offset between fit and detection position for source 33 = 1.388212 pixels
[Sat Aug 25 02:14:21 2012] Warning, changing simple spatial fit ID from 33 to 40
[Sat Aug 25 02:14:21 2012] 7603.287000 total counts/ 6977.290000 bgd. counts: snr = 7.494262
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 1.388212 pixels
  Position = (282.6, 344.3) = 11 24 36.25 -59 13 58.1
  Extent = 13.3 (10.0-16.2)", rotation angle = 0
  Source counts = 626.0 +/- 87.2
  Background counts = 6977.3
  Rate = 0.08 +/- 0.01
[Sat Aug 25 02:14:21 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:21 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 02:14:21 2012] Source does appear to be extended
[Sat Aug 25 02:14:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 03:43:19 2012] XMMSAS src. selection expression = ellipse(24539.062000, 29907.830000, 795.858023, 795.858023, 0.000000, X, Y)
[Sat Aug 25 03:43:19 2012] Writing source region out to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src33_src.reg
[Sat Aug 25 03:43:19 2012] Extracting stamp from image fullrun_mos1_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (237, 299) - (328, 390)
[Sat Aug 25 03:43:19 2012] XMMSAS bgd. selection expression = annulus(24539.062000, 29907.830000, 1326.430038, 2652.860076, X, Y) && !ellipse(22690.172800, 29055.467600, 1333.216038, 1333.216038, 0.000000, X, Y) && !ellipse(25685.390000, 27722.510800, 1623.944047, 964.648028, 5.135560, X, Y) && !ellipse(24588.028800, 27826.373000, 1176.960034, 1176.960034, 0.000000, X, Y) && !ellipse(23463.270000, 27752.213800, 1218.176035, 1218.176035, 0.000000, X, Y) && !ellipse(27774.507400, 26898.490000, 1171.976034, 1171.976034, 0.000000, X, Y) && !ellipse(23994.827600, 27132.553600, 577.136017, 577.136017, 0.000000, X, Y) && !ellipse(22662.585600, 27921.735400, 953.056027, 587.660817, 90.000000, X, Y) && !ellipse(26491.158000, 30380.304000, 412.055212, 412.055212, 0.000000, X, Y) && !ellipse(25740.024000, 28737.990000, 1230.440035, 842.920024, 47.747000, X, Y) && !ellipse(27642.724817, 28797.275832, 1230.440035, 720.726798, 90.000000, X, Y) && !ellipse(25521.386230, 28917.742188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.566200, 26689.638000, 1171.976034, 1171.976034, 0.000000, X, Y) && !ellipse(27008.043335, 28139.669922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21301.692400, 28186.787600, 729.517621, 729.517621, 0.000000, X, Y) && !ellipse(27648.730340, 28660.052000, 1464.640042, 1464.640042, 0.000000, X, Y) && !ellipse(22280.634600, 27046.944200, 717.424021, 717.424021, 0.000000, X, Y) && !ellipse(25630.886000, 26472.114000, 1015.232029, 1015.232029, 0.000000, X, Y) && !ellipse(24586.372600, 28877.324600, 1244.168036, 1244.168036, 0.000000, X, Y) && !ellipse(25128.887800, 31603.255400, 993.304029, 993.304029, 0.000000, X, Y) && !ellipse(27873.006744, 27968.075378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24218.939000, 31730.682000, 1052.592030, 1052.592030, 0.000000, X, Y) && !ellipse(23254.329720, 31018.064400, 617.155218, 617.155218, 0.000000, X, Y) && !ellipse(27049.201599, 29273.290436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25356.129242, 30574.076904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24068.928558, 31192.204895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24447.208000, 30225.853400, 647.039219, 647.039219, 0.000000, X, Y) && !ellipse(27448.417114, 30569.056244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26331.586000, 31305.026000, 1403.056040, 1403.056040, 0.000000, X, Y) && !ellipse(24680.872986, 30831.678467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26959.273102, 30999.486938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27526.313019, 31082.260132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22388.130402, 31111.229156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22018.376419, 30738.332947, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 03:43:19 2012] Writing fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src33.gif
[Sat Aug 25 05:09:51 2012] Mean detx,y = (673.40, 2245.04) 
[Sat Aug 25 05:09:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 05:10:06 2012] grppha failed
[Sat Aug 25 05:10:06 2012] Setting source spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src33_src.pi.gz
[Sat Aug 25 05:10:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat Aug 25 07:07:03 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:03 2012] Error reading totcts from fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src33_src.pi.gz
[Sat Aug 25 07:07:04 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:07 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Sat Aug 25 07:07:07 2012] Flag c found in src. 33 procflags, skipping spectral fitting
[Sat Aug 25 07:07:07 2012] Source 33 has no response, skipping
[Sat Aug 25 07:07:08 2012] xmm0110012601/analysis//spectral/fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete