[Fri Aug 24 01:02:23 2012] Detection parameters:
  Position = (316.1, 351.9) = 11 24 17.29 -59 13 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 959.9 +/- 47.9
  Background counts = 291.2
  Rate = 0.09 +/- 0.005

[Fri Aug 24 01:02:25 2012] Off-axis axis estimate = 4.08'
[Fri Aug 24 04:47:46 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 04:47:46 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Fri Aug 24 04:47:46 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.044
[Fri Aug 24 04:47:46 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 8.47"
[Fri Aug 24 08:20:22 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src42.ximg exists
[Fri Aug 24 08:20:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src42.csv
[Fri Aug 24 08:20:22 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri Aug 24 08:20:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src42.csv
[Fri Aug 24 08:20:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 08:20:23 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri Aug 24 08:20:23 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri Aug 24 08:20:23 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Fri Aug 24 13:22:25 2012] Warning, spatial fit 42 centroid is now closest to src. 50
[Fri Aug 24 13:22:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:25 2012] Assessing source extent using major
[Fri Aug 24 13:22:25 2012] Source does appear to be extended
[Fri Aug 24 13:22:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:25 2012] Source is confused with source 50
[Fri Aug 24 13:22:25 2012] Source is confused with source 49
[Fri Aug 24 16:47:27 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 16:47:27 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Fri Aug 24 16:47:27 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.044
[Fri Aug 24 16:47:27 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 8.47"
[Fri Aug 24 21:07:31 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src41.ximg exists
[Fri Aug 24 21:07:31 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri Aug 24 21:07:31 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src41 appears to have run properly
[Fri Aug 24 21:07:32 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri Aug 24 21:07:32 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Aug 24 21:07:32 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sat Aug 25 02:14:21 2012] Warning, spatial fit 41 centroid is now closest to src. 26
[Sat Aug 25 02:14:21 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:21 2012] Assessing source extent using major
[Sat Aug 25 02:14:21 2012] Source does appear to be extended
[Sat Aug 25 02:14:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 03:43:19 2012] XMMSAS src. selection expression = ellipse(27448.417114, 30569.056244, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 25 03:43:19 2012] Writing source region out to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src29_src.reg
[Sat Aug 25 03:43:19 2012] Extracting stamp from image fullrun_mos1_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (279, 314) - (354, 389)
[Sat Aug 25 03:43:19 2012] XMMSAS bgd. selection expression = annulus(27448.417114, 30569.056244, 1087.500000, 2175.000000, X, Y) && !ellipse(25685.390000, 27722.510800, 1623.944047, 964.648028, 5.135560, X, Y) && !ellipse(24588.028800, 27826.373000, 1176.960034, 1176.960034, 0.000000, X, Y) && !ellipse(26491.158000, 30380.304000, 412.055212, 412.055212, 0.000000, X, Y) && !ellipse(25740.024000, 28737.990000, 1230.440035, 842.920024, 47.747000, X, Y) && !ellipse(27642.724817, 28797.275832, 1230.440035, 720.726798, 90.000000, X, Y) && !ellipse(25521.386230, 28917.742188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.043335, 28139.669922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27648.730340, 28660.052000, 1464.640042, 1464.640042, 0.000000, X, Y) && !ellipse(24586.372600, 28877.324600, 1244.168036, 1244.168036, 0.000000, X, Y) && !ellipse(25128.887800, 31603.255400, 993.304029, 993.304029, 0.000000, X, Y) && !ellipse(27873.006744, 27968.075378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.201599, 29273.290436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24539.062000, 29907.830000, 1061.144031, 1061.144031, 0.000000, X, Y) && !ellipse(25356.129242, 30574.076904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26331.586000, 31305.026000, 1403.056040, 1403.056040, 0.000000, X, Y) && !ellipse(24680.872986, 30831.678467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26959.273102, 30999.486938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27526.313019, 31082.260132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29447.623400, 29267.783200, 1190.896034, 1190.896034, 0.000000, X, Y) && !ellipse(29351.003143, 28393.578339, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 03:43:19 2012] Writing fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src29.gif
[Sat Aug 25 05:19:06 2012] Mean detx,y = (-1984.14, 3422.46) 
[Sat Aug 25 05:19:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 05:19:18 2012] grppha failed
[Sat Aug 25 05:19:18 2012] Setting source spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src29_src.pi.gz
[Sat Aug 25 05:19:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Aug 25 05:26:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 05:26:01 2012] rmf not generated due to insufficient counts
[Sat Aug 25 07:07:04 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:04 2012] Error reading totcts from fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src29_src.pi.gz
[Sat Aug 25 07:07:04 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 07:07:09 2012] xmm0110012601/analysis//spectral/fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete