[Fri Aug 24 01:02:23 2012] Detection parameters:
  Position = (292.9, 308.0) = 11 24 30.42 -59 16 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2550.6 +/- 72.5
  Background counts = 357.4
  Rate = 0.2 +/- 0.007

[Fri Aug 24 01:02:25 2012] Off-axis axis estimate = 0.80'
[Fri Aug 24 04:47:46 2012] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 04:47:46 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Fri Aug 24 04:47:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.934
[Fri Aug 24 04:47:46 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 6.83"
[Fri Aug 24 08:20:21 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src20.ximg exists
[Fri Aug 24 08:20:21 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Aug 24 08:20:21 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_src20 appears to have run properly
[Fri Aug 24 08:20:23 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Aug 24 08:20:23 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Aug 24 08:20:23 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Aug 24 13:22:25 2012] Source 17 is offset by -3.231824 and -7.294492 pixels which is larger than
2 X fitted extent = 3.080533 x 3.080533, not incorporating fit results
[Fri Aug 24 13:22:25 2012] Spatial fit model total counts = 7142.800000, observed total counts = 7147.000000
[Fri Aug 24 13:22:25 2012] Offset between fit and detection position for source 17 = 4.644802 pixels
[Fri Aug 24 13:22:25 2012] Warning, changing simple spatial fit ID from 20 to 37
[Fri Aug 24 13:22:25 2012] 7111.350000 total counts/ 6702.400000 bgd. counts: snr = 4.995225
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 4.644802 pixels
  Position = (296.5, 305.0) = 11 24 28.40 -59 16 49.2
  Extent = 13.0 (13.0-26.1)", rotation angle = 0
  Source counts = 408.9 +/- 84.3
  Background counts = 6702.4
  Rate = 0.05 +/- 0.01
[Fri Aug 24 13:22:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:22:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:22:25 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 13:22:25 2012] Source does appear to be extended
[Fri Aug 24 13:22:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:22:25 2012] Source is confused with source 41
[Fri Aug 24 16:47:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 16:47:27 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Fri Aug 24 16:47:27 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.001
[Fri Aug 24 16:47:27 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 13.05"
[Fri Aug 24 21:07:30 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src19.ximg exists
[Fri Aug 24 21:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src19.csv
[Fri Aug 24 21:07:30 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Aug 24 21:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src19.csv
[Fri Aug 24 21:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 21:07:32 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Aug 24 21:07:32 2012] fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Aug 24 21:07:32 2012] Fit fullrun_mos1_xmm0110012601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Aug 25 02:14:21 2012] Source 17 is offset by 3.798736 and -2.206016 pixels which is larger than
2 X fitted extent = 3.262124 x 3.262124, not incorporating fit results
[Sat Aug 25 02:14:21 2012] Source 17 is offset by 5.768966 and 1.672276 pixels which is larger than
2 X fitted extent = 1.272432 x 1.272432, not incorporating fit results
[Sat Aug 25 02:14:21 2012] Spatial fit model total counts = 7154.290000, observed total counts = 7147.000000
[Sat Aug 25 02:14:21 2012] Offset between fit and detection position for source 17 = 1.305815 pixels
[Sat Aug 25 02:14:21 2012] Warning, changing simple spatial fit ID from 19 to 36
[Sat Aug 25 02:14:21 2012] 7013.758000 total counts/ 6546.410000 bgd. counts: snr = 5.776154
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.305815 pixels
  Position = (295.2, 304.8) = 11 24 29.14 -59 16 49.9
  Extent = 12.7 (12.7-25.4)", rotation angle = 0
  Source counts = 467.3 +/- 83.7
  Background counts = 6546.4
  Rate = 0.06 +/- 0.01
[Sat Aug 25 02:14:21 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 02:14:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 02:14:21 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 02:14:21 2012] Source does appear to be extended
[Sat Aug 25 02:14:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 03:43:18 2012] XMMSAS src. selection expression = ellipse(25630.886000, 26472.114000, 761.424022, 761.424022, 0.000000, X, Y)
[Sat Aug 25 03:43:18 2012] Writing source region out to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src17_src.reg
[Sat Aug 25 03:43:18 2012] Extracting stamp from image fullrun_mos1_xmm0110012601_pi300-10000_cl_sm2.00.img.gz, (251, 261) - (339, 349)
[Sat Aug 25 03:43:18 2012] XMMSAS bgd. selection expression = annulus(25630.886000, 26472.114000, 1269.040037, 2538.080073, X, Y) && !ellipse(22690.172800, 29055.467600, 1333.216038, 1333.216038, 0.000000, X, Y) && !ellipse(25685.390000, 27722.510800, 1623.944047, 964.648028, 5.135560, X, Y) && !ellipse(24588.028800, 27826.373000, 1176.960034, 1176.960034, 0.000000, X, Y) && !ellipse(23463.270000, 27752.213800, 1218.176035, 1218.176035, 0.000000, X, Y) && !ellipse(27774.507400, 26898.490000, 1171.976034, 1171.976034, 0.000000, X, Y) && !ellipse(23994.827600, 27132.553600, 577.136017, 577.136017, 0.000000, X, Y) && !ellipse(22662.585600, 27921.735400, 953.056027, 587.660817, 90.000000, X, Y) && !ellipse(25740.024000, 28737.990000, 1230.440035, 842.920024, 47.747000, X, Y) && !ellipse(27642.724817, 28797.275832, 1230.440035, 720.726798, 90.000000, X, Y) && !ellipse(25521.386230, 28917.742188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.566200, 26689.638000, 1171.976034, 1171.976034, 0.000000, X, Y) && !ellipse(23239.156000, 25414.156000, 677.423219, 677.423219, 0.000000, X, Y) && !ellipse(27008.043335, 28139.669922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27648.730340, 28660.052000, 1464.640042, 1464.640042, 0.000000, X, Y) && !ellipse(24586.372600, 28877.324600, 1244.168036, 1244.168036, 0.000000, X, Y) && !ellipse(27434.960600, 24990.988460, 1138.416033, 1138.416033, 0.000000, X, Y) && !ellipse(23843.358000, 25923.738000, 640.284818, 640.284818, 0.000000, X, Y) && !ellipse(27873.006744, 27968.075378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28986.876495, 26310.506073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23138.964800, 25430.712000, 1217.216035, 1217.216035, 0.000000, X, Y) && !ellipse(27049.201599, 29273.290436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26321.084000, 24998.916000, 579.037617, 579.037617, 0.000000, X, Y) && !ellipse(24539.062000, 29907.830000, 1061.144031, 1061.144031, 0.000000, X, Y) && !ellipse(24854.522522, 25708.544556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26675.068000, 24332.620000, 703.361620, 703.361620, 0.000000, X, Y) && !ellipse(24742.777649, 26137.440643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.512000, 24840.940000, 976.384028, 976.384028, 0.000000, X, Y) && !ellipse(25786.583832, 25443.822205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24826.607544, 25185.740082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25776.794140, 23587.029200, 641.188018, 641.188018, 0.000000, X, Y) && !ellipse(24431.366608, 25269.702728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22264.700745, 25635.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23908.699000, 23130.226000, 824.456024, 824.456024, 0.000000, X, Y) && !ellipse(28804.120000, 24739.280240, 1266.376036, 1266.376036, 0.000000, X, Y)
[Sat Aug 25 03:43:18 2012] Writing fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src17.gif
[Sat Aug 25 04:42:01 2012] Mean detx,y = (-978.74, -807.98) 
[Sat Aug 25 04:42:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 04:42:16 2012] grppha failed
[Sat Aug 25 04:42:16 2012] Setting source spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src17_src.pi.gz
[Sat Aug 25 04:42:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Aug 25 07:07:03 2012] Updating aperture counts using extracted products
[Sat Aug 25 07:07:03 2012] Error reading totcts from fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src17_src.pi.gz
[Sat Aug 25 07:07:04 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 07:07:07 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Sat Aug 25 07:07:07 2012] Flag c found in src. 17 procflags, skipping spectral fitting
[Sat Aug 25 07:07:07 2012] Source 17 has no response, skipping
[Sat Aug 25 07:07:08 2012] xmm0110012601/analysis//spectral/fullrun_mos1_xmm0110012601_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete