[Thu Jul 26 09:11:27 2012] Detection parameters:
  Position = (303.3, 293.0) = 14 40 56.74 -62 41 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3415.3 +/- 82.3
  Background counts = 499.0
  Rate = 0.5 +/- 0.01

[Thu Jul 26 09:11:30 2012] Off-axis axis estimate = 0.53'
[Thu Jul 26 09:16:30 2012] Using EEF radius (= 6.69 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 09:16:30 2012] Initial guess for spatial extent in simple fitting = 6.69"
[Thu Jul 26 09:16:30 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.963
[Thu Jul 26 09:16:30 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.69"
[Thu Jul 26 17:30:41 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jul 26 17:30:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src7.csv
[Thu Jul 26 17:30:41 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jul 26 17:30:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src7.csv
[Thu Jul 26 17:30:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 17:30:43 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jul 26 17:30:43 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jul 26 17:30:43 2012] Fit fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jul 27 06:22:46 2012] Spatial fit model total counts = 18470.400000, observed total counts = 18455.000000
[Fri Jul 27 06:22:46 2012] Offset between fit and detection position for source 8 = 1.149974 pixels
[Fri Jul 27 06:22:46 2012] 18521.260000 total counts/ 17126.500000 bgd. counts: snr = 10.657741
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.149974 pixels
  Position = (303.1, 294.1) = 14 40 56.87 -62 41 48.9
  Extent = 9.3 (8.3-10.6)", rotation angle = 0
  Source counts = 1394.8 +/- 136.1
  Background counts = 17126.5
  Rate = 0.2 +/- 0.02
[Fri Jul 27 06:22:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:22:46 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:22:46 2012] Source does appear to be extended
[Fri Jul 27 06:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:22:47 2012] Source is confused with source 90
[Fri Jul 27 06:23:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 06:23:56 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Fri Jul 27 06:23:56 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.079
[Fri Jul 27 06:23:56 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.29"
[Fri Jul 27 16:50:29 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jul 27 16:50:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src7.csv
[Fri Jul 27 16:50:29 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jul 27 16:50:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src7.csv
[Fri Jul 27 16:50:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 16:50:32 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jul 27 16:50:32 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jul 27 16:50:32 2012] Fit fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Jul 28 12:00:23 2012] Spatial fit model total counts = 17454.100000, observed total counts = 17435.000000
[Sat Jul 28 12:00:23 2012] Offset between fit and detection position for source 8 = 0.333342 pixels
[Sat Jul 28 12:00:23 2012] 16894.820000 total counts/ 15071.900000 bgd. counts: snr = 14.848535
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.333342 pixels
  Position = (303.2, 294.4) = 14 40 56.77 -62 41 47.6
  Extent = 10.6 (9.5-12.1)", rotation angle = 0
  Source counts = 1822.9 +/- 130.0
  Background counts = 15071.9
  Rate = 0.2 +/- 0.02
[Sat Jul 28 12:00:24 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:24 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:00:24 2012] Source does appear to be extended
[Sat Jul 28 12:00:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:02:06 2012] Counts = 1822.920000, rescaling region sizes by 2.000000
[Sat Jul 28 12:02:06 2012] XMMSAS src. selection expression = ellipse(26332.303920, 25567.180400, 1268.832037, 1268.832037, 0.000000, X, Y)
[Sat Jul 28 12:02:06 2012] Writing source region out to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src8_src.reg
[Sat Jul 28 12:02:06 2012] Extracting stamp from image fullrun_pn_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (230, 222) - (376, 367)
[Sat Jul 28 12:02:07 2012] XMMSAS bgd. selection expression = annulus(26332.303920, 25567.180400, 4229.440122, 8458.880243, X, Y) && !ellipse(25385.643000, 23784.676000, 3498.096101, 3498.096101, 0.000000, X, Y) && !ellipse(18826.529404, 26570.351135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27531.551723, 25134.368669, 1140.384033, 819.112114, 336.916221, X, Y) && !ellipse(23624.898800, 23141.989800, 1200.728035, 1200.728035, 0.000000, X, Y) && !ellipse(29696.926700, 27313.908600, 1296.472037, 712.030420, 90.000000, X, Y) && !ellipse(27741.296051, 27006.070648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28659.479523, 25884.180054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29784.104797, 27963.675995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30161.004791, 31394.857971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29844.083400, 30389.942000, 1408.320041, 1408.320041, 0.000000, X, Y) && !ellipse(32028.625600, 28281.494000, 1295.016037, 1020.064029, 217.568000, X, Y) && !ellipse(28766.936523, 27711.267670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21875.987198, 22802.407898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29191.881000, 33057.006000, 1538.888044, 911.680026, 61.817000, X, Y) && !ellipse(28837.944000, 34679.354000, 10580.928304, 10580.928304, 0.000000, X, Y) && !ellipse(30858.550000, 30660.210000, 594.821617, 594.821617, 0.000000, X, Y) && !ellipse(29916.943878, 29969.526733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.181030, 25914.917328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23995.478000, 23841.394000, 1193.872034, 1193.872034, 0.000000, X, Y) && !ellipse(28423.901800, 34441.107200, 1469.616042, 1469.616042, 0.000000, X, Y) && !ellipse(30856.468475, 29529.028168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30256.164000, 28383.662000, 1396.528040, 534.179215, 323.450000, X, Y) && !ellipse(31126.530200, 27163.245800, 1383.120040, 1383.120040, 0.000000, X, Y) && !ellipse(29697.688904, 31985.944489, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(29335.366000, 35270.242000, 1660.360048, 1660.360048, 0.000000, X, Y) && !ellipse(31722.265180, 31098.569600, 918.368026, 918.368026, 0.000000, X, Y) && !ellipse(31872.176483, 29914.522491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27182.186707, 28158.849854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17778.176483, 20681.224014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31182.697688, 26846.820000, 1387.168040, 1387.168040, 0.000000, X, Y) && !ellipse(17913.301544, 24555.510468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16612.338600, 24869.911000, 1650.120047, 1650.120047, 0.000000, X, Y) && !ellipse(20241.564438, 22392.843079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31318.900000, 31981.900000, 1284.568037, 1284.568037, 0.000000, X, Y) && !ellipse(30336.799591, 26386.469116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17492.302841, 25658.109619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18791.364868, 32208.300537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28141.249664, 29268.439697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32222.698761, 27590.681549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17784.968048, 26282.572510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22106.418000, 26061.806000, 2439.472070, 2439.472070, 0.000000, X, Y) && !ellipse(19747.194000, 25933.210480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21499.073929, 24923.991364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21684.074000, 25275.708000, 1330.328038, 1330.328038, 0.000000, X, Y) && !ellipse(19649.552643, 24568.278503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19218.832550, 24651.258789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29202.900299, 23886.060760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18648.402161, 23604.269226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18357.276000, 21517.670000, 1589.176046, 1589.176046, 0.000000, X, Y) && !ellipse(30179.502380, 33801.302185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31168.837982, 32814.066711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28044.555600, 29702.120000, 1296.872037, 1296.872037, 0.000000, X, Y) && !ellipse(27136.921112, 29022.467163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23839.234000, 27713.631300, 1213.160035, 738.488821, 326.053000, X, Y) && !ellipse(26070.968000, 26206.032000, 1077.720031, 1077.720031, 0.000000, X, Y) && !ellipse(22830.304000, 26565.388000, 1219.736035, 1219.736035, 0.000000, X, Y) && !ellipse(25070.517400, 26587.249860, 1099.200032, 1099.200032, 0.000000, X, Y) && !ellipse(21239.037704, 26210.504395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22430.158000, 26308.448000, 1238.016036, 1238.016036, 0.000000, X, Y) && !ellipse(19342.296722, 26322.764343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24776.842000, 26563.320200, 1126.608032, 1126.608032, 0.000000, X, Y) && !ellipse(17984.227997, 25881.981689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25208.201630, 25790.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18581.122000, 25230.070000, 1961.840056, 1961.840056, 0.000000, X, Y) && !ellipse(23013.514000, 25174.486000, 1203.968035, 1203.968035, 0.000000, X, Y) && !ellipse(24831.944000, 25469.496000, 530.714415, 530.714415, 0.000000, X, Y) && !ellipse(23759.370000, 25471.258800, 1149.056033, 1149.056033, 0.000000, X, Y) && !ellipse(32031.903046, 25366.430756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24303.000000, 25413.063800, 1061.432031, 706.517620, -0.000000, X, Y) && !ellipse(17887.565018, 25209.624725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23363.874000, 25432.041000, 1174.024034, 1174.024034, 0.000000, X, Y) && !ellipse(31248.644000, 25508.500000, 1421.416041, 637.661618, 90.000000, X, Y) && !ellipse(31800.721680, 24479.258026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23667.904968, 24547.840088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.369720, 24286.391388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20173.339478, 24230.372925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18255.995468, 23869.713745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31335.485200, 24452.326000, 1391.000040, 1391.000040, 0.000000, X, Y) && !ellipse(17459.501282, 22952.332092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30005.250153, 22494.708588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29461.688660, 22474.156006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25493.197784, 22330.967621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19195.443069, 22307.961792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29118.693390, 22073.627579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28624.464996, 21776.049240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25121.984863, 21783.176666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23303.751770, 21532.681290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28202.705627, 21317.106186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27372.812500, 20931.865417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18485.266541, 21169.138748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.336548, 20923.796783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26075.015594, 20912.862045, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 12:02:07 2012] Writing fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src8.gif
[Sat Jul 28 12:36:10 2012] Mean detx,y = (-940.16, 651.70) 
[Sat Jul 28 12:36:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 12:37:53 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 12:37:53 2012] Setting source spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jul 28 12:37:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Jul 31 04:18:33 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:33 2012] Error reading totcts from fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jul 31 04:18:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:37 2012] Using photon index=1.80, rate=0.211, arf fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src8.arf
[Tue Jul 31 04:18:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:37 2012] Updating source flux to 5.1e-13
[Tue Jul 31 04:39:33 2012] Flag c found in src. 8 procflags, skipping spectral fitting