[Thu Jul 26 09:11:29 2012] Detection parameters:
  Position = (270.2, 460.2) = 14 41 17.51 -62 29 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.4 +/- 22.8
  Background counts = 100.4
  Rate = 0.02 +/- 0.003

[Thu Jul 26 09:11:30 2012] Off-axis axis estimate = 11.90'
[Thu Jul 26 09:16:30 2012] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 09:16:30 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Thu Jul 26 09:16:30 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.938
[Thu Jul 26 09:16:30 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 12.38"
[Thu Jul 26 17:30:42 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src75.ximg exists
[Thu Jul 26 17:30:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src75.csv
[Thu Jul 26 17:30:43 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src75_1.ximg exists
[Thu Jul 26 17:30:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src75.csv
[Thu Jul 26 17:30:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 17:30:45 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Thu Jul 26 17:30:45 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Thu Jul 26 17:30:45 2012] Fit fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Fri Jul 27 06:22:46 2012] Source 78 is offset by 2.069176 and 5.313056 pixels which is larger than
2 X fitted extent = 1.457812 x 1.457812, not incorporating fit results
[Fri Jul 27 06:22:46 2012] Warning, spatial fit 75 centroid is now closest to src. 79
[Fri Jul 27 06:22:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:22:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:22:47 2012] Assessing source extent using major
[Fri Jul 27 06:22:47 2012] Source does appear to be extended
[Fri Jul 27 06:22:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:22:47 2012] Source is confused with source 56
[Fri Jul 27 06:23:56 2012] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 06:23:56 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Fri Jul 27 06:23:56 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.938
[Fri Jul 27 06:23:56 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 12.38"
[Fri Jul 27 16:50:31 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src73.ximg exists
[Fri Jul 27 16:50:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src73.csv
[Fri Jul 27 16:50:31 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src73_1.ximg exists
[Fri Jul 27 16:50:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src73.csv
[Fri Jul 27 16:50:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 16:50:34 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Fri Jul 27 16:50:34 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Fri Jul 27 16:50:34 2012] Fit fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Sat Jul 28 12:00:24 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 26.946921 pixels away
[Sat Jul 28 12:00:24 2012] Warning, spatial fit 73 centroid is now closest to src. 57
[Sat Jul 28 12:00:24 2012] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 34.613449 pixels away
[Sat Jul 28 12:00:24 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:24 2012] Assessing source extent using major
[Sat Jul 28 12:00:24 2012] Source does appear to be extended
[Sat Jul 28 12:00:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:02:13 2012] XMMSAS src. selection expression = ellipse(23461.654327, 39984.599915, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 12:02:13 2012] Writing source region out to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src78_src.reg
[Sat Jul 28 12:02:13 2012] Extracting stamp from image fullrun_pn_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (233, 423) - (308, 498)
[Sat Jul 28 12:02:13 2012] XMMSAS bgd. selection expression = annulus(23461.654327, 39984.599915, 1087.500000, 2175.000000, X, Y) && !ellipse(28837.944000, 34679.354000, 10580.928304, 10580.928304, 0.000000, X, Y) && !ellipse(29623.787800, 40058.608000, 4070.240117, 2639.352076, 67.945000, X, Y) && !ellipse(23322.622000, 40324.570000, 1961.840056, 1961.840056, 0.000000, X, Y) && !ellipse(22898.382000, 40564.674000, 1980.672057, 1980.672057, 0.000000, X, Y) && !ellipse(23992.084000, 39452.428000, 1980.672057, 1980.672057, 0.000000, X, Y)
[Sat Jul 28 12:02:13 2012] Writing fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src78.gif
[Sat Jul 28 15:14:56 2012] Mean detx,y = (-10195.61, 12472.88) 
[Sat Jul 28 15:14:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 15:15:25 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 15:15:25 2012] Setting source spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sat Jul 28 15:15:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Sun Jul 29 06:40:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 29 06:40:26 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:35 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:35 2012] Error reading totcts from fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Tue Jul 31 04:18:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:39 2012] Using photon index=1.80, rate=0.0166, arf fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src78.arf
[Tue Jul 31 04:18:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:39 2012] Updating source flux to 1.3e-13
[Tue Jul 31 04:39:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting