[Thu Jul 26 09:11:29 2012] Detection parameters:
  Position = (336.2, 275.1) = 14 40 35.89 -62 43 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 472.4 +/- 35.4
  Background counts = 230.8
  Rate = 0.07 +/- 0.005

[Thu Jul 26 09:11:30 2012] Off-axis axis estimate = 3.22'
[Thu Jul 26 09:16:30 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 09:16:30 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Thu Jul 26 09:16:30 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.907
[Thu Jul 26 09:16:30 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 8.04"
[Thu Jul 26 17:30:42 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src68.ximg exists
[Thu Jul 26 17:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src68.csv
[Thu Jul 26 17:30:42 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src68_1.ximg exists
[Thu Jul 26 17:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src68.csv
[Thu Jul 26 17:30:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 17:30:45 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Thu Jul 26 17:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src68.csv
[Thu Jul 26 17:30:45 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Thu Jul 26 17:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src68.csv
[Thu Jul 26 17:30:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:46 2012] Spatial fit model total counts = 4191.870000, observed total counts = 3525.000000
[Fri Jul 27 06:22:46 2012] Poor agreement between spatial fit and data for source 71
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 06:22:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:22:46 2012] Assessing source extent using major
[Fri Jul 27 06:22:46 2012] Source does appear to be extended
[Fri Jul 27 06:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:56 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 06:23:56 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Fri Jul 27 06:23:56 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.907
[Fri Jul 27 06:23:56 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 8.04"
[Fri Jul 27 16:50:31 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src67.ximg exists
[Fri Jul 27 16:50:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src67.csv
[Fri Jul 27 16:50:31 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src67_1.ximg exists
[Fri Jul 27 16:50:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src67.csv
[Fri Jul 27 16:50:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 16:50:33 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Fri Jul 27 16:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src67.csv
[Fri Jul 27 16:50:33 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Fri Jul 27 16:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src67.csv
[Fri Jul 27 16:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:00:24 2012] Spatial fit model total counts = 4476.030000, observed total counts = 3525.000000
[Sat Jul 28 12:00:24 2012] Poor agreement between spatial fit and data for source 71
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 28 12:00:24 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:24 2012] Assessing source extent using major
[Sat Jul 28 12:00:24 2012] Source does appear to be extended
[Sat Jul 28 12:00:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:02:13 2012] XMMSAS src. selection expression = ellipse(29202.900299, 23886.060760, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 12:02:13 2012] Writing source region out to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src71_src.reg
[Sat Jul 28 12:02:13 2012] Extracting stamp from image fullrun_pn_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (299, 238) - (374, 313)
[Sat Jul 28 12:02:13 2012] XMMSAS bgd. selection expression = annulus(29202.900299, 23886.060760, 1087.500000, 2175.000000, X, Y) && !ellipse(25385.643000, 23784.676000, 3498.096101, 3498.096101, 0.000000, X, Y) && !ellipse(27531.551723, 25134.368669, 1140.384033, 819.112114, 336.916221, X, Y) && !ellipse(29696.926700, 27313.908600, 1296.472037, 712.030420, 90.000000, X, Y) && !ellipse(28659.479523, 25884.180054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.303920, 25567.180400, 845.888024, 845.888024, 0.000000, X, Y) && !ellipse(28837.944000, 34679.354000, 10580.928304, 10580.928304, 0.000000, X, Y) && !ellipse(29699.181030, 25914.917328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31126.530200, 27163.245800, 1383.120040, 1383.120040, 0.000000, X, Y) && !ellipse(31182.697688, 26846.820000, 1387.168040, 1387.168040, 0.000000, X, Y) && !ellipse(30336.799591, 26386.469116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.968000, 26206.032000, 1077.720031, 1077.720031, 0.000000, X, Y) && !ellipse(32031.903046, 25366.430756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31248.644000, 25508.500000, 1421.416041, 637.661618, 90.000000, X, Y) && !ellipse(31800.721680, 24479.258026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.369720, 24286.391388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31335.485200, 24452.326000, 1391.000040, 1391.000040, 0.000000, X, Y) && !ellipse(30005.250153, 22494.708588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29461.688660, 22474.156006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29118.693390, 22073.627579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28624.464996, 21776.049240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28202.705627, 21317.106186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27372.812500, 20931.865417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.336548, 20923.796783, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 12:02:13 2012] Writing fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src71.gif
[Sat Jul 28 15:06:30 2012] Mean detx,y = (-1603.14, -2304.06) 
[Sat Jul 28 15:06:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 15:07:12 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 15:07:12 2012] Setting source spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sat Jul 28 15:07:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Sun Jul 29 06:36:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 29 06:36:06 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:35 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:35 2012] Error reading totcts from fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue Jul 31 04:18:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:39 2012] Using photon index=1.80, rate=0.0728, arf fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src71.arf
[Tue Jul 31 04:18:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:39 2012] Updating source flux to 2.3e-13
[Tue Jul 31 04:39:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting