[Thu Jul 26 09:11:29 2012] Detection parameters:
  Position = (248.0, 292.1) = 14 41 31.70 -62 41 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 587.3 +/- 44.1
  Background counts = 440.2
  Rate = 0.09 +/- 0.007

[Thu Jul 26 09:11:30 2012] Off-axis axis estimate = 3.69'
[Thu Jul 26 09:16:30 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 09:16:30 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Thu Jul 26 09:16:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.693
[Thu Jul 26 09:16:30 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 8.27"
[Thu Jul 26 17:30:42 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src65.ximg exists
[Thu Jul 26 17:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src65.csv
[Thu Jul 26 17:30:42 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src65_1.ximg exists
[Thu Jul 26 17:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src65.csv
[Thu Jul 26 17:30:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 17:30:45 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Thu Jul 26 17:30:45 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Thu Jul 26 17:30:45 2012] Fit fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Fri Jul 27 06:22:46 2012] Spatial fit model total counts = 7751.580000, observed total counts = 7701.000000
[Fri Jul 27 06:22:46 2012] Offset between fit and detection position for source 68 = 2.799942 pixels
[Fri Jul 27 06:22:46 2012] 7731.830000 total counts/ 6601.000000 bgd. counts: snr = 13.918501
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 2.799942 pixels
  Position = (245.7, 290.4) = 14 41 33.15 -62 42 4.7
  Extent = 16.5 (16.5-33.1)", rotation angle = 0
  Source counts = 1130.8 +/- 87.9
  Background counts = 6601.0
  Rate = 0.1 +/- 0.01
[Fri Jul 27 06:22:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:22:46 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:22:46 2012] Source does appear to be extended
[Fri Jul 27 06:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:22:47 2012] Source is confused with source 65
[Fri Jul 27 06:23:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 06:23:56 2012] Initial guess for spatial extent in simple fitting = 16.54"
[Fri Jul 27 06:23:56 2012] source mask rpix=3.8, npix_max = 74, mask sum = 80, frac = 1.080
[Fri Jul 27 06:23:56 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 16.54"
[Fri Jul 27 16:50:31 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src64.ximg exists
[Fri Jul 27 16:50:31 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src64_1.ximg exists
[Fri Jul 27 16:50:31 2012] Fit fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src64 appears to have run properly
[Fri Jul 27 16:50:33 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Fri Jul 27 16:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64.csv
[Fri Jul 27 16:50:33 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Fri Jul 27 16:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64.csv
[Fri Jul 27 16:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:00:24 2012] Spatial fit model total counts = 7370.500000, observed total counts = 6743.000000
[Sat Jul 28 12:00:24 2012] Offset between fit and detection position for source 68 = 4.161030 pixels
[Sat Jul 28 12:00:24 2012] Warning, changing simple spatial fit ID from 64 to 63
[Sat Jul 28 12:00:24 2012] 6293.921000 total counts/ 5580.790000 bgd. counts: snr = 9.546001
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 4.161030 pixels
  Position = (249.8, 291.1) = 14 41 30.55 -62 42 2.0
  Extent = 16.6 (16.6-33.3)", rotation angle = 0
  Source counts = 713.1 +/- 79.3
  Background counts = 5580.8
  Rate = 0.08 +/- 0.009
[Sat Jul 28 12:00:24 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:24 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:00:24 2012] Source does appear to be extended
[Sat Jul 28 12:00:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:02:13 2012] XMMSAS src. selection expression = ellipse(21684.074000, 25275.708000, 997.746029, 997.746029, 0.000000, X, Y)
[Sat Jul 28 12:02:13 2012] Writing source region out to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src68_src.reg
[Sat Jul 28 12:02:13 2012] Extracting stamp from image fullrun_pn_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (192, 234) - (307, 348)
[Sat Jul 28 12:02:13 2012] XMMSAS bgd. selection expression = annulus(21684.074000, 25275.708000, 1662.910048, 3325.820096, X, Y) && !ellipse(25385.643000, 23784.676000, 3498.096101, 3498.096101, 0.000000, X, Y) && !ellipse(18826.529404, 26570.351135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23624.898800, 23141.989800, 1200.728035, 1200.728035, 0.000000, X, Y) && !ellipse(21875.987198, 22802.407898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28837.944000, 34679.354000, 10580.928304, 10580.928304, 0.000000, X, Y) && !ellipse(23995.478000, 23841.394000, 1193.872034, 1193.872034, 0.000000, X, Y) && !ellipse(17913.301544, 24555.510468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20241.564438, 22392.843079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17492.302841, 25658.109619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17784.968048, 26282.572510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22106.418000, 26061.806000, 2439.472070, 2439.472070, 0.000000, X, Y) && !ellipse(19747.194000, 25933.210480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21499.073929, 24923.991364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19649.552643, 24568.278503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19218.832550, 24651.258789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18648.402161, 23604.269226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18357.276000, 21517.670000, 1589.176046, 1589.176046, 0.000000, X, Y) && !ellipse(23839.234000, 27713.631300, 1213.160035, 738.488821, 326.053000, X, Y) && !ellipse(26070.968000, 26206.032000, 1077.720031, 1077.720031, 0.000000, X, Y) && !ellipse(22830.304000, 26565.388000, 1219.736035, 1219.736035, 0.000000, X, Y) && !ellipse(25070.517400, 26587.249860, 1099.200032, 1099.200032, 0.000000, X, Y) && !ellipse(21239.037704, 26210.504395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22430.158000, 26308.448000, 1238.016036, 1238.016036, 0.000000, X, Y) && !ellipse(19342.296722, 26322.764343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24776.842000, 26563.320200, 1126.608032, 1126.608032, 0.000000, X, Y) && !ellipse(17984.227997, 25881.981689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25208.201630, 25790.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18581.122000, 25230.070000, 1961.840056, 1961.840056, 0.000000, X, Y) && !ellipse(23013.514000, 25174.486000, 1203.968035, 1203.968035, 0.000000, X, Y) && !ellipse(24831.944000, 25469.496000, 530.714415, 530.714415, 0.000000, X, Y) && !ellipse(23759.370000, 25471.258800, 1149.056033, 1149.056033, 0.000000, X, Y) && !ellipse(24303.000000, 25413.063800, 1061.432031, 706.517620, -0.000000, X, Y) && !ellipse(17887.565018, 25209.624725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23363.874000, 25432.041000, 1174.024034, 1174.024034, 0.000000, X, Y) && !ellipse(23667.904968, 24547.840088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20173.339478, 24230.372925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18255.995468, 23869.713745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25493.197784, 22330.967621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19195.443069, 22307.961792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25121.984863, 21783.176666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23303.751770, 21532.681290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18485.266541, 21169.138748, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 12:02:13 2012] Writing fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src68.gif
[Sat Jul 28 15:04:04 2012] Mean detx,y = (2151.82, 4290.54) 
[Sat Jul 28 15:04:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 15:04:53 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 15:04:53 2012] Setting source spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Jul 28 15:04:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Tue Jul 31 04:18:35 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:35 2012] Error reading totcts from fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Tue Jul 31 04:18:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:39 2012] Using photon index=1.80, rate=0.0824, arf fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src68.arf
[Tue Jul 31 04:18:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:39 2012] Updating source flux to 2.4e-13
[Tue Jul 31 04:39:33 2012] Flag c found in src. 68 procflags, skipping spectral fitting