[Thu Jul 26 09:11:28 2012] Detection parameters:
  Position = (247.7, 287.0) = 14 41 31.90 -62 42 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 453.1 +/- 41.0
  Background counts = 460.4
  Rate = 0.07 +/- 0.006

[Thu Jul 26 09:11:30 2012] Off-axis axis estimate = 3.77'
[Thu Jul 26 09:16:30 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 09:16:30 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Thu Jul 26 09:16:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860
[Thu Jul 26 09:16:30 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 8.31"
[Thu Jul 26 17:30:42 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src64.ximg exists
[Thu Jul 26 17:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src64.csv
[Thu Jul 26 17:30:42 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src64_1.ximg exists
[Thu Jul 26 17:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src64.csv
[Thu Jul 26 17:30:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 17:30:45 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Thu Jul 26 17:30:45 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Thu Jul 26 17:30:45 2012] Fit fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Fri Jul 27 06:22:46 2012] Source 67 is offset by -6.972300 and 6.685694 pixels which is larger than
2 X fitted extent = 0.955697 x 0.955697, not incorporating fit results
[Fri Jul 27 06:22:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:22:46 2012] Assessing source extent using major
[Fri Jul 27 06:22:46 2012] Source does appear to be extended
[Fri Jul 27 06:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:22:47 2012] Source is confused with source 65
[Fri Jul 27 06:23:56 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 06:23:56 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Fri Jul 27 06:23:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860
[Fri Jul 27 06:23:56 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 8.31"
[Fri Jul 27 16:50:31 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src63.ximg exists
[Fri Jul 27 16:50:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src63.csv
[Fri Jul 27 16:50:31 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri Jul 27 16:50:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src63.csv
[Fri Jul 27 16:50:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 16:50:33 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri Jul 27 16:50:33 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Jul 27 16:50:33 2012] Fit fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sat Jul 28 12:00:24 2012] Warning, spatial fit 63 centroid is now closest to src. 68
[Sat Jul 28 12:00:24 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:24 2012] Assessing source extent using major
[Sat Jul 28 12:00:24 2012] Source does appear to be extended
[Sat Jul 28 12:00:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:02:13 2012] XMMSAS src. selection expression = ellipse(21499.073929, 24923.991364, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 12:02:13 2012] Writing source region out to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src67_src.reg
[Sat Jul 28 12:02:13 2012] Extracting stamp from image fullrun_pn_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (210, 250) - (285, 325)
[Sat Jul 28 12:02:13 2012] XMMSAS bgd. selection expression = annulus(21499.073929, 24923.991364, 1087.500000, 2175.000000, X, Y) && !ellipse(25385.643000, 23784.676000, 3498.096101, 3498.096101, 0.000000, X, Y) && !ellipse(18826.529404, 26570.351135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23624.898800, 23141.989800, 1200.728035, 1200.728035, 0.000000, X, Y) && !ellipse(21875.987198, 22802.407898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28837.944000, 34679.354000, 10580.928304, 10580.928304, 0.000000, X, Y) && !ellipse(23995.478000, 23841.394000, 1193.872034, 1193.872034, 0.000000, X, Y) && !ellipse(20241.564438, 22392.843079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22106.418000, 26061.806000, 2439.472070, 2439.472070, 0.000000, X, Y) && !ellipse(19747.194000, 25933.210480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21684.074000, 25275.708000, 1330.328038, 1330.328038, 0.000000, X, Y) && !ellipse(19649.552643, 24568.278503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19218.832550, 24651.258789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18648.402161, 23604.269226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18357.276000, 21517.670000, 1589.176046, 1589.176046, 0.000000, X, Y) && !ellipse(23839.234000, 27713.631300, 1213.160035, 738.488821, 326.053000, X, Y) && !ellipse(22830.304000, 26565.388000, 1219.736035, 1219.736035, 0.000000, X, Y) && !ellipse(21239.037704, 26210.504395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22430.158000, 26308.448000, 1238.016036, 1238.016036, 0.000000, X, Y) && !ellipse(19342.296722, 26322.764343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24776.842000, 26563.320200, 1126.608032, 1126.608032, 0.000000, X, Y) && !ellipse(18581.122000, 25230.070000, 1961.840056, 1961.840056, 0.000000, X, Y) && !ellipse(23013.514000, 25174.486000, 1203.968035, 1203.968035, 0.000000, X, Y) && !ellipse(23759.370000, 25471.258800, 1149.056033, 1149.056033, 0.000000, X, Y) && !ellipse(24303.000000, 25413.063800, 1061.432031, 706.517620, -0.000000, X, Y) && !ellipse(23363.874000, 25432.041000, 1174.024034, 1174.024034, 0.000000, X, Y) && !ellipse(23667.904968, 24547.840088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20173.339478, 24230.372925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19195.443069, 22307.961792, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 12:02:13 2012] Writing fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src67.gif
[Sat Jul 28 15:03:18 2012] Mean detx,y = (2508.66, 4220.78) 
[Sat Jul 28 15:03:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 15:03:53 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 15:03:53 2012] Setting source spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sat Jul 28 15:03:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Sun Jul 29 06:32:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 29 06:32:47 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:35 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:35 2012] Error reading totcts from fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Tue Jul 31 04:18:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:39 2012] Using photon index=1.80, rate=0.0691, arf fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src67.arf
[Tue Jul 31 04:18:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:39 2012] Updating source flux to 2.2e-13
[Tue Jul 31 04:39:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting