[Thu Jul 26 09:11:28 2012] Detection parameters:
  Position = (206.5, 282.8) = 14 41 57.97 -62 42 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 394.2 +/- 44.6
  Background counts = 382.6
  Rate = 0.05 +/- 0.005

[Thu Jul 26 09:11:30 2012] Off-axis axis estimate = 6.76'
[Thu Jul 26 09:16:30 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 09:16:30 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Thu Jul 26 09:16:30 2012] source mask rpix=2.3, npix_max = 30, mask sum = 21, frac = 0.692
[Thu Jul 26 09:16:30 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 9.81"
[Thu Jul 26 17:30:41 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src32.ximg exists
[Thu Jul 26 17:30:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src32.csv
[Thu Jul 26 17:30:41 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu Jul 26 17:30:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src32.csv
[Thu Jul 26 17:30:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 17:30:44 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu Jul 26 17:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu Jul 26 17:30:44 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu Jul 26 17:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu Jul 26 17:30:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:46 2012] Warning, spatial fit 32 centroid is now closest to src. 35
[Fri Jul 27 06:22:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:22:46 2012] Assessing source extent using major
[Fri Jul 27 06:22:46 2012] Source does appear to be extended
[Fri Jul 27 06:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:22:47 2012] Source is confused with source 100
[Fri Jul 27 06:23:56 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 06:23:56 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Fri Jul 27 06:23:56 2012] source mask rpix=2.3, npix_max = 30, mask sum = 21, frac = 0.692
[Fri Jul 27 06:23:56 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 9.81"
[Fri Jul 27 16:50:30 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src32.ximg exists
[Fri Jul 27 16:50:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src32.csv
[Fri Jul 27 16:50:30 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri Jul 27 16:50:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src32.csv
[Fri Jul 27 16:50:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 16:50:33 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri Jul 27 16:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri Jul 27 16:50:33 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri Jul 27 16:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri Jul 27 16:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:00:24 2012] Warning, spatial fit 32 centroid is now closest to src. 107
[Sat Jul 28 12:00:24 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:24 2012] Assessing source extent using major
[Sat Jul 28 12:00:24 2012] Source does appear to be extended
[Sat Jul 28 12:00:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:02:10 2012] XMMSAS src. selection expression = ellipse(17913.301544, 24555.510468, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 12:02:10 2012] Writing source region out to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src34_src.reg
[Sat Jul 28 12:02:10 2012] Extracting stamp from image fullrun_pn_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (169, 245) - (244, 320)
[Sat Jul 28 12:02:10 2012] XMMSAS bgd. selection expression = annulus(17913.301544, 24555.510468, 1087.500000, 2175.000000, X, Y) && !ellipse(18826.529404, 26570.351135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14959.000000, 22851.146271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28837.944000, 34679.354000, 10580.928304, 10580.928304, 0.000000, X, Y) && !ellipse(16612.338600, 24869.911000, 1650.120047, 1650.120047, 0.000000, X, Y) && !ellipse(14474.320000, 21990.036000, 1863.816054, 1863.816054, 0.000000, X, Y) && !ellipse(20241.564438, 22392.843079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17492.302841, 25658.109619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17784.968048, 26282.572510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22106.418000, 26061.806000, 2439.472070, 2439.472070, 0.000000, X, Y) && !ellipse(19747.194000, 25933.210480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19649.552643, 24568.278503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19218.832550, 24651.258789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18648.402161, 23604.269226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18357.276000, 21517.670000, 1589.176046, 1589.176046, 0.000000, X, Y) && !ellipse(19342.296722, 26322.764343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17984.227997, 25881.981689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18581.122000, 25230.070000, 1961.840056, 1961.840056, 0.000000, X, Y) && !ellipse(17887.565018, 25209.624725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20173.339478, 24230.372925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18255.995468, 23869.713745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17459.501282, 22952.332092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19195.443069, 22307.961792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15256.748260, 21696.576248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14997.188000, 21064.964000, 2773.952080, 1876.792054, 0.000000, X, Y)
[Sat Jul 28 12:02:10 2012] Writing fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src34.gif
[Sat Jul 28 13:52:19 2012] Mean detx,y = (5203.53, 6694.48) 
[Sat Jul 28 13:52:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 13:52:56 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 13:52:57 2012] Setting source spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Jul 28 13:52:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sun Jul 29 05:44:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 29 05:44:48 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:34 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:34 2012] Error reading totcts from fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Jul 31 04:18:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:38 2012] Using photon index=1.80, rate=0.0455, arf fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src34.arf
[Tue Jul 31 04:18:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:38 2012] Updating source flux to 1.9e-13
[Tue Jul 31 04:39:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting