[Thu Jul 26 09:11:28 2012] Detection parameters:
  Position = (366.9, 344.4) = 14 40 16.60 -62 38 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 711.0 +/- 36.5
  Background counts = 125.7
  Rate = 0.2 +/- 0.008

[Thu Jul 26 09:11:30 2012] Off-axis axis estimate = 5.98'
[Thu Jul 26 09:16:30 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 09:16:30 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Thu Jul 26 09:16:30 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.845
[Thu Jul 26 09:16:30 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 9.42"
[Thu Jul 26 17:30:41 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src28.ximg exists
[Thu Jul 26 17:30:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src28.csv
[Thu Jul 26 17:30:41 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Jul 26 17:30:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src28.csv
[Thu Jul 26 17:30:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 17:30:44 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Jul 26 17:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jul 26 17:30:44 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Jul 26 17:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jul 26 17:30:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:46 2012] Warning, spatial fit 28 centroid is now closest to src. 18
[Fri Jul 27 06:22:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:22:46 2012] Assessing source extent using major
[Fri Jul 27 06:22:46 2012] Source does appear to be extended
[Fri Jul 27 06:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:56 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 06:23:56 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Fri Jul 27 06:23:56 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.845
[Fri Jul 27 06:23:56 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 9.42"
[Fri Jul 27 16:50:30 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src28.ximg exists
[Fri Jul 27 16:50:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src28.csv
[Fri Jul 27 16:50:30 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Jul 27 16:50:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src28.csv
[Fri Jul 27 16:50:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 16:50:33 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Jul 27 16:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri Jul 27 16:50:33 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Jul 27 16:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri Jul 27 16:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:00:24 2012] Spatial fit model total counts = 5937.240000, observed total counts = 4316.000000
[Sat Jul 28 12:00:24 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 28 12:00:24 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:24 2012] Assessing source extent using major
[Sat Jul 28 12:00:24 2012] Source does appear to be extended
[Sat Jul 28 12:00:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:02:09 2012] XMMSAS src. selection expression = ellipse(31872.176483, 29914.522491, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 12:02:09 2012] Writing source region out to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src30_src.reg
[Sat Jul 28 12:02:09 2012] Extracting stamp from image fullrun_pn_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (329, 307) - (404, 382)
[Sat Jul 28 12:02:10 2012] XMMSAS bgd. selection expression = annulus(31872.176483, 29914.522491, 1087.500000, 2175.000000, X, Y) && !ellipse(29696.926700, 27313.908600, 1296.472037, 712.030420, 90.000000, X, Y) && !ellipse(29784.104797, 27963.675995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30161.004791, 31394.857971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29844.083400, 30389.942000, 1408.320041, 1408.320041, 0.000000, X, Y) && !ellipse(32028.625600, 28281.494000, 1295.016037, 1020.064029, 217.568000, X, Y) && !ellipse(29191.881000, 33057.006000, 1538.888044, 911.680026, 61.817000, X, Y) && !ellipse(28837.944000, 34679.354000, 10580.928304, 10580.928304, 0.000000, X, Y) && !ellipse(30858.550000, 30660.210000, 594.821617, 594.821617, 0.000000, X, Y) && !ellipse(29916.943878, 29969.526733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30856.468475, 29529.028168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30256.164000, 28383.662000, 1396.528040, 534.179215, 323.450000, X, Y) && !ellipse(31126.530200, 27163.245800, 1383.120040, 1383.120040, 0.000000, X, Y) && !ellipse(29697.688904, 31985.944489, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(31722.265180, 31098.569600, 918.368026, 918.368026, 0.000000, X, Y) && !ellipse(31182.697688, 26846.820000, 1387.168040, 1387.168040, 0.000000, X, Y) && !ellipse(31318.900000, 31981.900000, 1284.568037, 1284.568037, 0.000000, X, Y) && !ellipse(32222.698761, 27590.681549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31168.837982, 32814.066711, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 12:02:10 2012] Writing fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src30.gif
[Sat Jul 28 13:45:17 2012] Mean detx,y = (-7981.28, -382.65) 
[Sat Jul 28 13:45:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 13:45:54 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 13:45:55 2012] Setting source spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Jul 28 13:45:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun Jul 29 05:40:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 29 05:40:42 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:34 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:34 2012] Error reading totcts from fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Jul 31 04:18:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:38 2012] Using photon index=1.80, rate=0.163, arf fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src30.arf
[Tue Jul 31 04:18:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:38 2012] Updating source flux to 8e-13
[Tue Jul 31 04:39:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting