[Thu Jul 26 09:11:29 2012] Detection parameters:
  Position = (263.9, 290.4) = 14 41 21.60 -62 42 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 259.3 +/- 38.9
  Background counts = 509.7
  Rate = 0.04 +/- 0.006

[Thu Jul 26 09:11:30 2012] Off-axis axis estimate = 2.57'
[Thu Jul 26 09:16:30 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 09:16:30 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Thu Jul 26 09:16:30 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Thu Jul 26 09:16:30 2012] Giving source the simple spatial ID 105 for pass 0, mean size = 7.71"
[Fri Jul 27 06:22:46 2012] Spatial fit model total counts = 7190.000000, observed total counts = 7108.000000
[Fri Jul 27 06:22:46 2012] Offset between fit and detection position for source 108 = 4.645650 pixels
[Fri Jul 27 06:22:46 2012] Warning, changing simple spatial fit ID from 105 to 98
[Fri Jul 27 06:22:46 2012] 7060.070000 total counts/ 6567.250000 bgd. counts: snr = 6.081302
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 4.645650 pixels
  Position = (268.4, 291.7) = 14 41 18.78 -62 41 59.4
  Extent = 15.5" x 11.1", rotation angle = 356
  Source counts = 492.8 +/- 84.0
  Background counts = 6567.2
  Rate = 0.06 +/- 0.01
[Fri Jul 27 06:22:46 2012] Spatial fit model total counts = 6543.090000, observed total counts = 6540.000000
[Fri Jul 27 06:22:46 2012] Offset between fit and detection position for source 108 = 2.403841 pixels
[Fri Jul 27 06:22:46 2012] Warning, changing simple spatial fit ID from 98 to 100
[Fri Jul 27 06:22:46 2012] 6512.545000 total counts/ 5569.700000 bgd. counts: snr = 12.633521
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 2.403841 pixels
  Position = (270.5, 292.9) = 14 41 17.45 -62 41 54.4
  Extent = 14.7 (14.6-14.7)", rotation angle = 0
  Source counts = 942.8 +/- 80.7
  Background counts = 5569.7
  Rate = 0.1 +/- 0.009
[Fri Jul 27 06:22:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:22:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:22:47 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:22:47 2012] Source does appear to be extended
[Fri Jul 27 06:22:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:22:47 2012] Source is confused with source 101
[Fri Jul 27 06:23:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 06:23:56 2012] Initial guess for spatial extent in simple fitting = 14.67"
[Fri Jul 27 06:23:56 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.934
[Fri Jul 27 06:23:56 2012] Giving source the simple spatial ID 97 for pass 1, mean size = 14.67"
[Fri Jul 27 16:50:32 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src97.ximg exists
[Fri Jul 27 16:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src97.csv
[Fri Jul 27 16:50:32 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src97_1.ximg exists
[Fri Jul 27 16:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src97.csv
[Fri Jul 27 16:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src97_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 16:50:35 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src97.ximg exists
[Fri Jul 27 16:50:35 2012] fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src97_1.ximg exists
[Fri Jul 27 16:50:35 2012] Fit fullrun_pn_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src97 appears to have run properly
[Sat Jul 28 12:00:24 2012] Spatial fit model total counts = 6545.600000, observed total counts = 6540.000000
[Sat Jul 28 12:00:24 2012] Offset between fit and detection position for source 108 = 1.411333 pixels
[Sat Jul 28 12:00:24 2012] Warning, changing simple spatial fit ID from 97 to 93
[Sat Jul 28 12:00:24 2012] 6627.157000 total counts/ 5652.750000 bgd. counts: snr = 12.960164
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 1.411333 pixels
  Position = (269.1, 292.9) = 14 41 18.34 -62 41 54.3
  Extent = 14.7 (14.6-29.4)", rotation angle = 0
  Source counts = 974.4 +/- 81.4
  Background counts = 5652.8
  Rate = 0.1 +/- 0.009
[Sat Jul 28 12:00:24 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:24 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:00:24 2012] Source does appear to be extended
[Sat Jul 28 12:00:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:02:15 2012] XMMSAS src. selection expression = ellipse(23363.874000, 25432.041000, 880.518025, 880.518025, 0.000000, X, Y)
[Sat Jul 28 12:02:15 2012] Writing source region out to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src108_src.reg
[Sat Jul 28 12:02:15 2012] Extracting stamp from image fullrun_pn_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (219, 242) - (320, 343)
[Sat Jul 28 12:02:15 2012] XMMSAS bgd. selection expression = annulus(23363.874000, 25432.041000, 1467.530042, 2935.060084, X, Y) && !ellipse(25385.643000, 23784.676000, 3498.096101, 3498.096101, 0.000000, X, Y) && !ellipse(23624.898800, 23141.989800, 1200.728035, 1200.728035, 0.000000, X, Y) && !ellipse(26332.303920, 25567.180400, 845.888024, 845.888024, 0.000000, X, Y) && !ellipse(21875.987198, 22802.407898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28837.944000, 34679.354000, 10580.928304, 10580.928304, 0.000000, X, Y) && !ellipse(23995.478000, 23841.394000, 1193.872034, 1193.872034, 0.000000, X, Y) && !ellipse(20241.564438, 22392.843079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22106.418000, 26061.806000, 2439.472070, 2439.472070, 0.000000, X, Y) && !ellipse(19747.194000, 25933.210480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21499.073929, 24923.991364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21684.074000, 25275.708000, 1330.328038, 1330.328038, 0.000000, X, Y) && !ellipse(19649.552643, 24568.278503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27136.921112, 29022.467163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23839.234000, 27713.631300, 1213.160035, 738.488821, 326.053000, X, Y) && !ellipse(26070.968000, 26206.032000, 1077.720031, 1077.720031, 0.000000, X, Y) && !ellipse(22830.304000, 26565.388000, 1219.736035, 1219.736035, 0.000000, X, Y) && !ellipse(25070.517400, 26587.249860, 1099.200032, 1099.200032, 0.000000, X, Y) && !ellipse(21239.037704, 26210.504395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22430.158000, 26308.448000, 1238.016036, 1238.016036, 0.000000, X, Y) && !ellipse(24776.842000, 26563.320200, 1126.608032, 1126.608032, 0.000000, X, Y) && !ellipse(25208.201630, 25790.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18581.122000, 25230.070000, 1961.840056, 1961.840056, 0.000000, X, Y) && !ellipse(23013.514000, 25174.486000, 1203.968035, 1203.968035, 0.000000, X, Y) && !ellipse(24831.944000, 25469.496000, 530.714415, 530.714415, 0.000000, X, Y) && !ellipse(23759.370000, 25471.258800, 1149.056033, 1149.056033, 0.000000, X, Y) && !ellipse(24303.000000, 25413.063800, 1061.432031, 706.517620, -0.000000, X, Y) && !ellipse(23667.904968, 24547.840088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20173.339478, 24230.372925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25493.197784, 22330.967621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25121.984863, 21783.176666, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 12:02:15 2012] Writing fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src108.gif
[Sat Jul 28 15:33:07 2012] Mean detx,y = (972.89, 3092.02) 
[Sat Jul 28 15:33:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 15:33:36 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 15:33:36 2012] Setting source spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Sat Jul 28 15:33:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src108_bgd.pi.gz
[Tue Jul 31 04:18:36 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:36 2012] Error reading totcts from fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Tue Jul 31 04:18:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:40 2012] Using photon index=1.80, rate=0.113, arf fullrun_pn_xmm0110012501_pi300-10000_pass1_cl_src108.arf
[Tue Jul 31 04:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:41 2012] Updating source flux to 3.2e-13
[Tue Jul 31 04:39:33 2012] Flag c found in src. 108 procflags, skipping spectral fitting