[Thu Jul 26 09:13:22 2012] Detection parameters:
  Position = (344.9, 279.9) = 14 40 30.39 -62 42 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.8 +/- 20.7
  Background counts = 107.7
  Rate = 0.01 +/- 0.002

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 3.63'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Fri Jul 27 00:31:49 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.697
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 8.24"
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src85.ximg exists
[Fri Jul 27 06:22:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src85.csv
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src85_1.ximg exists
[Fri Jul 27 06:22:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src85.csv
[Fri Jul 27 06:22:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:20 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Fri Jul 27 06:22:20 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Fri Jul 27 06:22:20 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Fri Jul 27 06:23:29 2012] Spatial fit model total counts = 1532.570000, observed total counts = 1525.000000
[Fri Jul 27 06:23:29 2012] Offset between fit and detection position for source 98 = 1.462218 pixels
[Fri Jul 27 06:23:29 2012] Warning, changing simple spatial fit ID from 85 to 83
[Fri Jul 27 06:23:29 2012] 1538.286000 total counts/ 1244.040000 bgd. counts: snr = 8.342446
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 1.462218 pixels
  Position = (343.9, 278.9) = 14 40 31.04 -62 42 55.1
  Extent = 16.9 (16.9-33.8)", rotation angle = 0
  Source counts = 294.2 +/- 39.2
  Background counts = 1244.0
  Rate = 0.02 +/- 0.003
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 70
[Sat Jul 28 03:09:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 16.90"
[Sat Jul 28 03:09:44 2012] source mask rpix=3.9, npix_max = 76, mask sum = 72, frac = 0.936
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 16.90"
[Sat Jul 28 11:59:41 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src80.ximg exists
[Sat Jul 28 11:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src80.csv
[Sat Jul 28 11:59:41 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src80_1.ximg exists
[Sat Jul 28 11:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src80.csv
[Sat Jul 28 11:59:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:44 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Sat Jul 28 11:59:44 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Sat Jul 28 11:59:44 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Sat Jul 28 12:01:25 2012] Warning, spatial fit 80 centroid is now closest to src. 92
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:49:03 2012] XMMSAS src. selection expression = ellipse(29871.228000, 24212.943200, 1014.156029, 1014.156029, 0.000000, X, Y)
[Mon Jul 30 16:49:03 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src98_src.reg
[Mon Jul 30 16:49:03 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (286, 221) - (402, 337)
[Mon Jul 30 16:49:03 2012] XMMSAS bgd. selection expression = annulus(29871.228000, 24212.943200, 1690.260049, 3380.520097, X, Y) && !ellipse(25787.741425, 24161.838654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.396000, 24998.666000, 2377.040068, 2377.040068, 0.000000, X, Y) && !ellipse(29716.462309, 27219.008942, 1144.048033, 651.939369, 269.000204, X, Y) && !ellipse(26338.978000, 25606.203660, 758.432822, 758.432822, 0.000000, X, Y) && !ellipse(28784.286084, 25741.112124, 1217.448035, 995.158491, -0.000000, X, Y) && !ellipse(27630.492531, 26864.210843, 1169.232034, 694.158968, 112.633139, X, Y) && !ellipse(27971.976000, 25449.060000, 1188.520034, 1188.520034, 0.000000, X, Y) && !ellipse(28305.354370, 25703.980560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29528.438000, 26858.628000, 801.896023, 801.896023, 0.000000, X, Y) && !ellipse(27560.254000, 25047.642000, 1643.376047, 1389.944040, 325.434000, X, Y) && !ellipse(31294.912048, 28024.131012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31980.536194, 28411.258179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28367.124000, 27643.248600, 1264.296036, 1264.296036, 0.000000, X, Y) && !ellipse(31075.144000, 26908.038000, 1408.784041, 1408.784041, 0.000000, X, Y) && !ellipse(31020.128440, 26650.998000, 1819.416052, 1819.416052, 0.000000, X, Y) && !ellipse(28960.581085, 27712.738556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31444.161865, 27363.833191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30824.711670, 28383.916687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28526.866000, 23725.466000, 2543.296073, 2543.296073, 0.000000, X, Y) && !ellipse(32149.311096, 27403.127625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31186.704000, 23896.780000, 1411.168041, 1411.168041, 0.000000, X, Y) && !ellipse(30911.030340, 26136.584000, 1363.376039, 1363.376039, 0.000000, X, Y) && !ellipse(29268.556000, 24002.443200, 1271.648037, 1271.648037, 0.000000, X, Y) && !ellipse(26645.313232, 26832.113129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30091.681600, 24234.022600, 1318.816038, 1318.816038, 0.000000, X, Y) && !ellipse(31447.472687, 24388.100250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.817600, 21008.453000, 1360.624039, 1360.624039, 0.000000, X, Y)
[Mon Jul 30 16:49:03 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src98.gif
[Mon Jul 30 20:02:21 2012] Mean detx,y = (2500.78, 2409.54) 
[Mon Jul 30 20:02:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 20:02:33 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 20:02:33 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Mon Jul 30 20:02:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Tue Jul 31 04:18:52 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:52 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Tue Jul 31 04:18:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:56 2012] Using photon index=1.80, rate=0.0244, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src98.arf
[Tue Jul 31 04:18:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:56 2012] Updating source flux to 2.9e-13
[Tue Jul 31 04:29:23 2012] Flag c found in src. 98 procflags, skipping spectral fitting