[Thu Jul 26 09:13:21 2012] Detection parameters:
  Position = (335.0, 383.2) = 14 40 36.78 -62 35 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 790.3 +/- 37.9
  Background counts = 109.4
  Rate = 0.1 +/- 0.006

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 6.69'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Fri Jul 27 00:31:49 2012] source mask rpix=2.2, npix_max = 30, mask sum = 32, frac = 1.060
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.78"
[Fri Jul 27 06:22:16 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jul 27 06:22:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src7.csv
[Fri Jul 27 06:22:16 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jul 27 06:22:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src7.csv
[Fri Jul 27 06:22:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jul 27 06:22:18 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jul 27 06:23:28 2012] Spatial fit model total counts = 4311.140000, observed total counts = 4289.000000
[Fri Jul 27 06:23:28 2012] Offset between fit and detection position for source 8 = 1.135563 pixels
[Fri Jul 27 06:23:28 2012] 3666.103000 total counts/ 2902.830000 bgd. counts: snr = 14.166713
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.135563 pixels
  Position = (334.1, 383.9) = 14 40 37.35 -62 35 18.3
  Extent = 12.1 (9.1-12.4)", rotation angle = 0
  Source counts = 763.3 +/- 60.5
  Background counts = 2902.8
  Rate = 0.06 +/- 0.005
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 9
[Fri Jul 27 06:23:29 2012] Source is confused with source 16
[Sat Jul 28 03:09:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Sat Jul 28 03:09:44 2012] source mask rpix=2.8, npix_max = 43, mask sum = 35, frac = 0.808
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.14"
[Sat Jul 28 11:59:39 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jul 28 11:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src7.csv
[Sat Jul 28 11:59:39 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jul 28 11:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src7.csv
[Sat Jul 28 11:59:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:42 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jul 28 11:59:42 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jul 28 11:59:42 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Jul 28 12:01:25 2012] Warning, spatial fit 7 centroid is now closest to src. 15
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:48:57 2012] XMMSAS src. selection expression = ellipse(29016.089600, 33352.085860, 728.292021, 728.292021, 0.000000, X, Y)
[Mon Jul 30 16:48:57 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src8_src.reg
[Mon Jul 30 16:48:57 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (292, 342) - (376, 426)
[Mon Jul 30 16:48:57 2012] XMMSAS bgd. selection expression = annulus(29016.089600, 33352.085860, 1213.820035, 2427.640070, X, Y) && !ellipse(29585.552000, 32482.072000, 1539.360044, 1539.360044, 0.000000, X, Y) && !ellipse(28764.794000, 34026.440000, 3264.240094, 1657.896048, 67.698000, X, Y) && !ellipse(29811.261400, 30461.262000, 1444.288042, 1444.288042, 0.000000, X, Y) && !ellipse(30020.144000, 31474.110000, 3078.720089, 3078.720089, 0.000000, X, Y) && !ellipse(29776.005200, 34415.020000, 1606.880046, 1606.880046, 0.000000, X, Y) && !ellipse(31171.585938, 30405.649811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29138.034000, 35019.410000, 1684.752048, 1684.752048, 0.000000, X, Y) && !ellipse(31701.804960, 31027.965800, 671.052819, 671.052819, 0.000000, X, Y) && !ellipse(31467.632324, 31531.220276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31650.871826, 30315.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28079.414000, 34440.376000, 1632.120047, 1632.120047, 0.000000, X, Y) && !ellipse(31143.716095, 32128.328400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29923.002655, 33608.969208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30470.384000, 36188.230000, 1784.864051, 1784.864051, 0.000000, X, Y) && !ellipse(28215.614380, 35773.503082, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:48:57 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src8.gif
[Mon Jul 30 17:26:57 2012] Mean detx,y = (8843.24, -4142.86) 
[Mon Jul 30 17:26:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 17:27:07 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 17:27:07 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jul 30 17:27:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Jul 31 04:18:49 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:49 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jul 31 04:18:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:53 2012] Using photon index=1.80, rate=0.0634, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src8.arf
[Tue Jul 31 04:18:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:53 2012] Updating source flux to 1.1e-12
[Tue Jul 31 04:29:23 2012] Flag c found in src. 8 procflags, skipping spectral fitting