[Thu Jul 26 09:13:22 2012] Detection parameters:
  Position = (210.6, 301.8) = 14 41 55.31 -62 41 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.2 +/- 22.0
  Background counts = 169.4
  Rate = 0.02 +/- 0.003

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 6.37'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Fri Jul 27 00:31:49 2012] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.681
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 9.62"
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src61.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src61.csv
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src61_1.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src61.csv
[Fri Jul 27 06:22:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Fri Jul 27 06:22:19 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Fri Jul 27 06:23:29 2012] Source 65 is offset by -4.386778 and -5.187711 pixels which is larger than
2 X fitted extent = 1.122533 x 1.122533, not incorporating fit results
[Fri Jul 27 06:23:29 2012] Spatial fit model total counts = 2279.360000, observed total counts = 2173.000000
[Fri Jul 27 06:23:29 2012] Offset between fit and detection position for source 65 = 1.280154 pixels
[Fri Jul 27 06:23:29 2012] 2144.891000 total counts/ 1811.810000 bgd. counts: snr = 7.825166
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 1.280154 pixels
  Position = (209.4, 302.3) = 14 41 56.05 -62 41 12.5
  Extent = 19.2 (19.2-38.5)", rotation angle = 0
  Source counts = 333.1 +/- 46.3
  Background counts = 1811.8
  Rate = 0.03 +/- 0.004
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 45
[Sat Jul 28 03:09:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 19.23"
[Sat Jul 28 03:09:44 2012] source mask rpix=4.4, npix_max = 96, mask sum = 70, frac = 0.723
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 19.23"
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src56.ximg exists
[Sat Jul 28 11:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src56.csv
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src56_1.ximg exists
[Sat Jul 28 11:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src56.csv
[Sat Jul 28 11:59:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Sat Jul 28 11:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src56.csv
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Sat Jul 28 11:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src56.csv
[Sat Jul 28 11:59:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:01:25 2012] Source 65 is offset by 2.364651 and 0.955903 pixels which is larger than
2 X fitted extent = 2.309338 x 2.309338, not incorporating fit results
[Sat Jul 28 12:01:25 2012] Warning, spatial fit 56 centroid is now closest to src. 45
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:49:01 2012] XMMSAS src. selection expression = ellipse(18172.168600, 26254.465600, 1153.824033, 1153.824033, 0.000000, X, Y)
[Mon Jul 30 16:49:01 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src65_src.reg
[Mon Jul 30 16:49:01 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (143, 236) - (276, 369)
[Mon Jul 30 16:49:02 2012] XMMSAS bgd. selection expression = annulus(18172.168600, 26254.465600, 1923.040055, 3846.080111, X, Y) && !ellipse(23830.074000, 23345.096000, 2527.072073, 2527.072073, 0.000000, X, Y) && !ellipse(23279.902000, 22969.946000, 1263.536036, 1263.536036, 0.000000, X, Y) && !ellipse(22196.760800, 23001.016000, 1357.184039, 1357.184039, 0.000000, X, Y) && !ellipse(21736.538000, 22325.070000, 1421.136041, 1421.136041, 0.000000, X, Y) && !ellipse(14507.041200, 22086.529360, 1697.224049, 1697.224049, 0.000000, X, Y) && !ellipse(20812.428000, 22372.156800, 1413.984041, 1413.984041, 0.000000, X, Y) && !ellipse(21426.930000, 25747.082000, 1041.608030, 556.487216, 325.708000, X, Y) && !ellipse(22328.493134, 26206.479370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16651.982000, 24902.634200, 1666.800048, 1666.800048, 0.000000, X, Y) && !ellipse(17906.326782, 25807.654144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20038.658000, 24807.391200, 1451.912042, 1451.912042, 0.000000, X, Y) && !ellipse(19414.148000, 24440.360000, 2903.824084, 1715.368049, 344.151000, X, Y) && !ellipse(19083.124000, 23884.780000, 1486.544043, 1486.544043, 0.000000, X, Y) && !ellipse(20519.872000, 24298.360000, 1370.448039, 1370.448039, 0.000000, X, Y) && !ellipse(21150.862000, 24934.255600, 2581.600074, 1583.024046, 312.067000, X, Y) && !ellipse(14203.338837, 22975.794586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17374.652000, 25752.790000, 1019.248029, 1019.248029, 0.000000, X, Y) && !ellipse(12963.270000, 20707.226000, 1904.448055, 1904.448055, 0.000000, X, Y) && !ellipse(21798.675400, 26388.869263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19658.504074, 23079.654022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21160.946000, 26728.314000, 940.448027, 940.448027, 0.000000, X, Y) && !ellipse(22784.990906, 27736.660370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.802000, 22104.886000, 1614.048046, 1614.048046, 0.000000, X, Y) && !ellipse(21966.535645, 21547.392807, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:49:02 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src65.gif
[Mon Jul 30 19:40:18 2012] Mean detx,y = (-3782.97, -7690.04) 
[Mon Jul 30 19:40:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 19:41:36 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 19:41:37 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Mon Jul 30 19:41:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Tue Jul 31 04:18:51 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:51 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Tue Jul 31 04:18:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:55 2012] Using photon index=1.80, rate=0.0277, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src65.arf
[Tue Jul 31 04:18:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:55 2012] Updating source flux to 4.3e-13
[Tue Jul 31 04:29:23 2012] Flag b found in src. 65 procflags, skipping spectral fitting
[Tue Jul 31 04:29:23 2012] Flag c found in src. 65 procflags, skipping spectral fitting