[Thu Jul 26 09:13:22 2012] Detection parameters:
  Position = (341.0, 435.7) = 14 40 33.03 -62 31 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.8 +/- 23.6
  Background counts = 89.7
  Rate = 0.02 +/- 0.002

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 10.42'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Fri Jul 27 00:31:49 2012] source mask rpix=2.7, npix_max = 40, mask sum = 31, frac = 0.768
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 11.64"
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src69.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src69.csv
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src69_1.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src69.csv
[Fri Jul 27 06:22:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:20 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Fri Jul 27 06:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src69.csv
[Fri Jul 27 06:22:20 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Fri Jul 27 06:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src69.csv
[Fri Jul 27 06:22:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:23:29 2012] Source 54 is offset by -1.712680 and 0.730584 pixels which is larger than
2 X fitted extent = 1.290593 x 1.290593, not incorporating fit results
[Fri Jul 27 06:23:29 2012] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 54 at 14.614603 pixels away
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 29
[Sat Jul 28 03:09:44 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Sat Jul 28 03:09:44 2012] source mask rpix=2.7, npix_max = 40, mask sum = 31, frac = 0.768
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 11.64"
[Sat Jul 28 11:59:41 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src64.ximg exists
[Sat Jul 28 11:59:41 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src64_1.ximg exists
[Sat Jul 28 11:59:41 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src64 appears to have run properly
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Sat Jul 28 11:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64.csv
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Sat Jul 28 11:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64.csv
[Sat Jul 28 11:59:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:01:25 2012] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 54 at 15.953435 pixels away
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:49:02 2012] XMMSAS src. selection expression = ellipse(29619.978851, 37861.412811, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 16:49:02 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src54_src.reg
[Mon Jul 30 16:49:02 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (304, 398) - (379, 473)
[Mon Jul 30 16:49:02 2012] XMMSAS bgd. selection expression = annulus(29619.978851, 37861.412811, 1087.500000, 2175.000000, X, Y) && !ellipse(28764.794000, 34026.440000, 3264.240094, 1657.896048, 67.698000, X, Y) && !ellipse(29776.005200, 34415.020000, 1606.880046, 1606.880046, 0.000000, X, Y) && !ellipse(29138.034000, 35019.410000, 1684.752048, 1684.752048, 0.000000, X, Y) && !ellipse(28079.414000, 34440.376000, 1632.120047, 1632.120047, 0.000000, X, Y) && !ellipse(29553.242035, 36844.987946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29631.095459, 37455.296875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30470.384000, 36188.230000, 1784.864051, 1784.864051, 0.000000, X, Y) && !ellipse(28215.614380, 35773.503082, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:49:02 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src54.gif
[Mon Jul 30 19:55:51 2012] Mean detx,y = (12603.29, -6598.49) 
[Mon Jul 30 19:55:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 19:56:18 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 19:56:19 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Mon Jul 30 19:56:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Tue Jul 31 03:14:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 31 03:14:47 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:52 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:52 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Jul 31 04:18:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:55 2012] Using photon index=1.80, rate=0.0184, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src54.arf
[Tue Jul 31 04:18:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:55 2012] Updating source flux to 5.7e-13
[Tue Jul 31 04:29:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting