[Thu Jul 26 09:13:21 2012] Detection parameters:
  Position = (148.8, 268.8) = 14 42 34.48 -62 43 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.8 +/- 22.9
  Background counts = 99.7
  Rate = 0.03 +/- 0.004

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 11.06'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Fri Jul 27 00:31:49 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.853
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 11.96"
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src50.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src50.csv
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src50.csv
[Fri Jul 27 06:22:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri Jul 27 06:22:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri Jul 27 06:22:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Jul 27 06:22:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:23:29 2012] Warning, spatial fit 50 centroid is now closest to src. 104
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:09:44 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Sat Jul 28 03:09:44 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.853
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 11.96"
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src46.ximg exists
[Sat Jul 28 11:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src46.csv
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src46_1.ximg exists
[Sat Jul 28 11:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src46.csv
[Sat Jul 28 11:59:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Sat Jul 28 11:59:43 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Sat Jul 28 12:01:25 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 14.479679 pixels away
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:49:01 2012] XMMSAS src. selection expression = ellipse(12899.420761, 23339.862823, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 16:49:01 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src50_src.reg
[Mon Jul 30 16:49:01 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (111, 231) - (186, 306)
[Mon Jul 30 16:49:01 2012] XMMSAS bgd. selection expression = annulus(12899.420761, 23339.862823, 1087.500000, 2175.000000, X, Y) && !ellipse(14507.041200, 22086.529360, 1697.224049, 1697.224049, 0.000000, X, Y) && !ellipse(16728.654000, 20423.942000, 1761.504051, 1761.504051, 0.000000, X, Y) && !ellipse(15343.523911, 20827.116547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16651.982000, 24902.634200, 1666.800048, 1666.800048, 0.000000, X, Y) && !ellipse(14203.338837, 22975.794586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12963.270000, 20707.226000, 1904.448055, 1904.448055, 0.000000, X, Y) && !ellipse(14110.803101, 21183.495819, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:49:01 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src50.gif
[Mon Jul 30 19:23:33 2012] Mean detx,y = (-9268.26, -9741.02) 
[Mon Jul 30 19:23:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 19:23:46 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 19:23:46 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jul 30 19:23:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Tue Jul 31 01:57:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 31 01:57:59 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:51 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:51 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue Jul 31 04:18:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:55 2012] Using photon index=1.80, rate=0.028, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src50.arf
[Tue Jul 31 04:18:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:55 2012] Updating source flux to 5.5e-13
[Tue Jul 31 04:29:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting