[Thu Jul 26 09:13:21 2012] Detection parameters:
  Position = (247.9, 295.0) = 14 41 31.75 -62 41 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 374.7 +/- 31.8
  Background counts = 169.3
  Rate = 0.04 +/- 0.003

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 3.67'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Fri Jul 27 00:31:49 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.868
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 8.27"
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src41.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src41.csv
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src41_1.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src41.csv
[Fri Jul 27 06:22:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Fri Jul 27 06:22:19 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Fri Jul 27 06:23:29 2012] Spatial fit model total counts = 3415.210000, observed total counts = 3412.000000
[Fri Jul 27 06:23:29 2012] Offset between fit and detection position for source 47 = 1.130540 pixels
[Fri Jul 27 06:23:29 2012] 3307.960000 total counts/ 3015.050000 bgd. counts: snr = 5.334417
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 1.130540 pixels
  Position = (246.9, 294.4) = 14 41 32.36 -62 41 47.7
  Extent = 11.1 (8.4-16.5)", rotation angle = 0
  Source counts = 292.9 +/- 57.5
  Background counts = 3015.1
  Rate = 0.02 +/- 0.005
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 94
[Sat Jul 28 03:09:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 11.09"
[Sat Jul 28 03:09:44 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.968
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 11.09"
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src39.ximg exists
[Sat Jul 28 11:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src39.csv
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat Jul 28 11:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src39.csv
[Sat Jul 28 11:59:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Jul 28 11:59:43 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sat Jul 28 12:01:25 2012] Warning, spatial fit 39 centroid is now closest to src. 46
[Sat Jul 28 12:01:25 2012] Spatial fit model total counts = 2134.530000, observed total counts = 2131.000000
[Sat Jul 28 12:01:25 2012] Offset between fit and detection position for source 47 = 2.141837 pixels
[Sat Jul 28 12:01:25 2012] Warning, changing simple spatial fit ID from 39 to 90
[Sat Jul 28 12:01:25 2012] 2088.790000 total counts/ 1942.440000 bgd. counts: snr = 3.320618
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 2.141837 pixels
  Position = (246.8, 296.5) = 14 41 32.42 -62 41 38.4
  Extent = 13.0 (6.4-16.3)" x 7.0 (4.3-9.6)", rotation angle = 326 (289-0) degrees
  Source counts = 146.3 +/- 45.7
  Background counts = 1942.4
  Rate = 0.01 +/- 0.004
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.67
[Mon Jul 30 16:49:00 2012] XMMSAS src. selection expression = ellipse(21426.930000, 25747.082000, 781.206022, 417.365412, 325.708000, X, Y)
[Mon Jul 30 16:49:00 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src47_src.reg
[Mon Jul 30 16:49:00 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (202, 252) - (292, 341)
[Mon Jul 30 16:49:00 2012] XMMSAS bgd. selection expression = annulus(21426.930000, 25747.082000, 1302.010037, 2604.020075, X, Y) && !ellipse(23830.074000, 23345.096000, 2527.072073, 2527.072073, 0.000000, X, Y) && !ellipse(23279.902000, 22969.946000, 1263.536036, 1263.536036, 0.000000, X, Y) && !ellipse(22196.760800, 23001.016000, 1357.184039, 1357.184039, 0.000000, X, Y) && !ellipse(21736.538000, 22325.070000, 1421.136041, 1421.136041, 0.000000, X, Y) && !ellipse(20812.428000, 22372.156800, 1413.984041, 1413.984041, 0.000000, X, Y) && !ellipse(22328.493134, 26206.479370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23192.820000, 25343.180000, 791.939223, 791.939223, 0.000000, X, Y) && !ellipse(20038.658000, 24807.391200, 1451.912042, 1451.912042, 0.000000, X, Y) && !ellipse(23743.793671, 27358.499237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19414.148000, 24440.360000, 2903.824084, 1715.368049, 344.151000, X, Y) && !ellipse(18172.168600, 26254.465600, 1538.432044, 1538.432044, 0.000000, X, Y) && !ellipse(19083.124000, 23884.780000, 1486.544043, 1486.544043, 0.000000, X, Y) && !ellipse(20519.872000, 24298.360000, 1370.448039, 1370.448039, 0.000000, X, Y) && !ellipse(21150.862000, 24934.255600, 2581.600074, 1583.024046, 312.067000, X, Y) && !ellipse(23788.305237, 24656.481232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21798.675400, 26388.869263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.250580, 26125.753204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19658.504074, 23079.654022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21160.946000, 26728.314000, 940.448027, 940.448027, 0.000000, X, Y) && !ellipse(22784.990906, 27736.660370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.802000, 22104.886000, 1614.048046, 1614.048046, 0.000000, X, Y) && !ellipse(23647.100159, 28022.222046, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:49:00 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src47.gif
[Mon Jul 30 19:14:13 2012] Mean detx,y = (-1894.61, -4850.79) 
[Mon Jul 30 19:14:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 19:14:32 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 19:14:32 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Mon Jul 30 19:14:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Tue Jul 31 04:18:51 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:51 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue Jul 31 04:18:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:54 2012] Using photon index=1.80, rate=0.0122, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src47.arf
[Tue Jul 31 04:18:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:54 2012] Updating source flux to 1.6e-13
[Tue Jul 31 04:29:23 2012] Flag c found in src. 47 procflags, skipping spectral fitting