[Thu Jul 26 09:13:21 2012] Detection parameters:
  Position = (257.2, 301.8) = 14 41 25.86 -62 41 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 336.9 +/- 28.7
  Background counts = 139.5
  Rate = 0.03 +/- 0.003

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 3.00'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Fri Jul 27 00:31:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.159
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 7.93"
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src45.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src45.csv
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src45_1.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src45.csv
[Fri Jul 27 06:22:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Fri Jul 27 06:22:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src45.csv
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Fri Jul 27 06:22:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src45.csv
[Fri Jul 27 06:22:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:23:29 2012] Spatial fit model total counts = 3172.980000, observed total counts = 2864.000000
[Fri Jul 27 06:23:29 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 86
[Sat Jul 28 03:09:44 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Sat Jul 28 03:09:44 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.159
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 7.93"
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src42.ximg exists
[Sat Jul 28 11:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src42.csv
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src42_1.ximg exists
[Sat Jul 28 11:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src42.csv
[Sat Jul 28 11:59:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sat Jul 28 11:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sat Jul 28 11:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Jul 28 11:59:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:01:25 2012] Source 46 is offset by 0.008289 and -3.417157 pixels which is larger than
2 X fitted extent = 1.274814 x 1.274814, not incorporating fit results
[Sat Jul 28 12:01:25 2012] Spatial fit model total counts = 2899.160000, observed total counts = 2529.000000
[Sat Jul 28 12:01:25 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 28 12:01:25 2012] Spatial fit model total counts = 3169.600000, observed total counts = 2864.000000
[Sat Jul 28 12:01:25 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:49:00 2012] XMMSAS src. selection expression = ellipse(22328.493134, 26206.479370, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 16:49:00 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src46_src.reg
[Mon Jul 30 16:49:00 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (220, 264) - (295, 339)
[Mon Jul 30 16:49:00 2012] XMMSAS bgd. selection expression = annulus(22328.493134, 26206.479370, 1087.500000, 2175.000000, X, Y) && !ellipse(23830.074000, 23345.096000, 2527.072073, 2527.072073, 0.000000, X, Y) && !ellipse(23279.902000, 22969.946000, 1263.536036, 1263.536036, 0.000000, X, Y) && !ellipse(22196.760800, 23001.016000, 1357.184039, 1357.184039, 0.000000, X, Y) && !ellipse(21426.930000, 25747.082000, 1041.608030, 556.487216, 325.708000, X, Y) && !ellipse(23192.820000, 25343.180000, 791.939223, 791.939223, 0.000000, X, Y) && !ellipse(20038.658000, 24807.391200, 1451.912042, 1451.912042, 0.000000, X, Y) && !ellipse(23743.793671, 27358.499237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19414.148000, 24440.360000, 2903.824084, 1715.368049, 344.151000, X, Y) && !ellipse(19083.124000, 23884.780000, 1486.544043, 1486.544043, 0.000000, X, Y) && !ellipse(20519.872000, 24298.360000, 1370.448039, 1370.448039, 0.000000, X, Y) && !ellipse(21150.862000, 24934.255600, 2581.600074, 1583.024046, 312.067000, X, Y) && !ellipse(25069.586800, 26613.573000, 861.680025, 861.680025, 0.000000, X, Y) && !ellipse(23788.305237, 24656.481232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21798.675400, 26388.869263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.250580, 26125.753204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21160.946000, 26728.314000, 940.448027, 940.448027, 0.000000, X, Y) && !ellipse(22784.990906, 27736.660370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23647.100159, 28022.222046, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:49:00 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src46.gif
[Mon Jul 30 19:15:07 2012] Mean detx,y = (-1000.01, -4504.51) 
[Mon Jul 30 19:15:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 19:15:27 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 19:15:27 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon Jul 30 19:15:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Tue Jul 31 01:51:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 31 01:51:50 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:51 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:51 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Tue Jul 31 04:18:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:54 2012] Using photon index=1.80, rate=0.0322, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src46.arf
[Tue Jul 31 04:18:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:55 2012] Updating source flux to 3.4e-13
[Tue Jul 31 04:29:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting