[Thu Jul 26 09:13:21 2012] Detection parameters:
  Position = (303.3, 294.0) = 14 40 56.74 -62 41 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1448.9 +/- 54.6
  Background counts = 222.2
  Rate = 0.1 +/- 0.005

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 0.48'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Fri Jul 27 00:31:49 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.968
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 6.67"
[Fri Jul 27 06:22:16 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jul 27 06:22:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src6.csv
[Fri Jul 27 06:22:16 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jul 27 06:22:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src6.csv
[Fri Jul 27 06:22:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jul 27 06:22:18 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jul 27 06:23:28 2012] Spatial fit model total counts = 7503.010000, observed total counts = 7503.000000
[Fri Jul 27 06:23:28 2012] Offset between fit and detection position for source 4 = 0.921475 pixels
[Fri Jul 27 06:23:28 2012] 7516.698000 total counts/ 6824.000000 bgd. counts: snr = 8.385412
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.921475 pixels
  Position = (303.3, 294.9) = 14 40 56.72 -62 41 45.7
  Extent = 9.5 (8.0-11.3)", rotation angle = 0
  Source counts = 692.7 +/- 86.7
  Background counts = 6824.0
  Rate = 0.06 +/- 0.007
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:09:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Sat Jul 28 03:09:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.045
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.48"
[Sat Jul 28 11:59:39 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jul 28 11:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src6.csv
[Sat Jul 28 11:59:39 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jul 28 11:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src6.csv
[Sat Jul 28 11:59:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:42 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jul 28 11:59:42 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jul 28 11:59:42 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Jul 28 12:01:25 2012] Warning, spatial fit 6 centroid is now closest to src. 84
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:01:25 2012] Source is confused with source 3
[Mon Jul 30 16:48:57 2012] XMMSAS src. selection expression = ellipse(26338.978000, 25606.203660, 568.824616, 568.824616, 0.000000, X, Y)
[Mon Jul 30 16:48:57 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src4_src.reg
[Mon Jul 30 16:48:57 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (271, 262) - (336, 328)
[Mon Jul 30 16:48:57 2012] XMMSAS bgd. selection expression = annulus(26338.978000, 25606.203660, 948.041027, 1896.082055, X, Y) && !ellipse(23830.074000, 23345.096000, 2527.072073, 2527.072073, 0.000000, X, Y) && !ellipse(25787.741425, 24161.838654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.396000, 24998.666000, 2377.040068, 2377.040068, 0.000000, X, Y) && !ellipse(23279.902000, 22969.946000, 1263.536036, 1263.536036, 0.000000, X, Y) && !ellipse(28784.286084, 25741.112124, 1217.448035, 995.158491, -0.000000, X, Y) && !ellipse(27630.492531, 26864.210843, 1169.232034, 694.158968, 112.633139, X, Y) && !ellipse(27971.976000, 25449.060000, 1188.520034, 1188.520034, 0.000000, X, Y) && !ellipse(28305.354370, 25703.980560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27560.254000, 25047.642000, 1643.376047, 1389.944040, 325.434000, X, Y) && !ellipse(28367.124000, 27643.248600, 1264.296036, 1264.296036, 0.000000, X, Y) && !ellipse(28960.581085, 27712.738556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28526.866000, 23725.466000, 2543.296073, 2543.296073, 0.000000, X, Y) && !ellipse(23743.793671, 27358.499237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25069.586800, 26613.573000, 861.680025, 861.680025, 0.000000, X, Y) && !ellipse(29268.556000, 24002.443200, 1271.648037, 1271.648037, 0.000000, X, Y) && !ellipse(26645.313232, 26832.113129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23788.305237, 24656.481232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.250580, 26125.753204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23647.100159, 28022.222046, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:48:57 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src4.gif
[Mon Jul 30 17:26:41 2012] Mean detx,y = (1228.11, -1052.91) 
[Mon Jul 30 17:26:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 17:26:52 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 17:26:52 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jul 30 17:26:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jul 31 04:18:49 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:49 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jul 31 04:18:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:53 2012] Using photon index=1.80, rate=0.0576, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src4.arf
[Tue Jul 31 04:18:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:53 2012] Updating source flux to 6.4e-13
[Tue Jul 31 04:29:23 2012] Flag c found in src. 4 procflags, skipping spectral fitting