[Thu Jul 26 09:13:21 2012] Detection parameters:
  Position = (368.1, 327.1) = 14 40 15.78 -62 39 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 385.6 +/- 28.2
  Background counts = 76.7
  Rate = 0.05 +/- 0.004

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 5.47'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Fri Jul 27 00:31:49 2012] source mask rpix=2.1, npix_max = 27, mask sum = 18, frac = 0.663
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.16"
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src29.ximg exists
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Jul 27 06:22:17 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src29 appears to have run properly
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Jul 27 06:22:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Jul 27 06:22:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri Jul 27 06:22:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:23:28 2012] Spatial fit model total counts = 3313.160000, observed total counts = 2826.000000
[Fri Jul 27 06:23:28 2012] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 06:23:28 2012] Warning, spatial fit 29 centroid is now closest to src. 63
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 20
[Sat Jul 28 03:09:44 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Sat Jul 28 03:09:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 18, frac = 0.663
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 9.16"
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src27.ximg exists
[Sat Jul 28 11:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src27.csv
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Jul 28 11:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src27.csv
[Sat Jul 28 11:59:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:42 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Jul 28 11:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat Jul 28 11:59:42 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Jul 28 11:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat Jul 28 11:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:01:25 2012] Warning, spatial fit 27 centroid is now closest to src. 20
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:48:59 2012] XMMSAS src. selection expression = ellipse(31980.536194, 28411.258179, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 16:48:59 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src38_src.reg
[Mon Jul 30 16:48:59 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (331, 290) - (406, 365)
[Mon Jul 30 16:48:59 2012] XMMSAS bgd. selection expression = annulus(31980.536194, 28411.258179, 1087.500000, 2175.000000, X, Y) && !ellipse(29716.462309, 27219.008942, 1144.048033, 651.939369, 269.000204, X, Y) && !ellipse(28784.286084, 25741.112124, 1217.448035, 995.158491, -0.000000, X, Y) && !ellipse(29811.261400, 30461.262000, 1444.288042, 1444.288042, 0.000000, X, Y) && !ellipse(30020.144000, 31474.110000, 3078.720089, 3078.720089, 0.000000, X, Y) && !ellipse(31829.897797, 28789.164429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29528.438000, 26858.628000, 801.896023, 801.896023, 0.000000, X, Y) && !ellipse(31294.912048, 28024.131012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31075.144000, 26908.038000, 1408.784041, 1408.784041, 0.000000, X, Y) && !ellipse(31171.585938, 30405.649811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31020.128440, 26650.998000, 1819.416052, 1819.416052, 0.000000, X, Y) && !ellipse(28960.581085, 27712.738556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31444.161865, 27363.833191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31701.804960, 31027.965800, 671.052819, 671.052819, 0.000000, X, Y) && !ellipse(31140.938934, 29360.818787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29858.432343, 29415.037140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30824.711670, 28383.916687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31650.871826, 30315.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28526.866000, 23725.466000, 2543.296073, 2543.296073, 0.000000, X, Y) && !ellipse(32149.311096, 27403.127625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30911.030340, 26136.584000, 1363.376039, 1363.376039, 0.000000, X, Y)
[Mon Jul 30 16:48:59 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src38.gif
[Mon Jul 30 18:47:23 2012] Mean detx,y = (7082.97, 1179.25) 
[Mon Jul 30 18:47:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 18:47:55 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 18:47:56 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Jul 30 18:47:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue Jul 31 01:12:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 31 01:12:24 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:50 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:50 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Jul 31 04:18:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:54 2012] Using photon index=1.80, rate=0.0535, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src38.arf
[Tue Jul 31 04:18:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:54 2012] Updating source flux to 9.2e-13
[Tue Jul 31 04:29:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting