[Thu Jul 26 09:13:21 2012] Detection parameters:
  Position = (343.8, 338.7) = 14 40 31.20 -62 38 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.5 +/- 22.3
  Background counts = 260.8
  Rate = 0.03 +/- 0.004

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 4.39'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Fri Jul 27 00:31:49 2012] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.892
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 8.63"
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src44.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src44.csv
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src44_1.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src44.csv
[Fri Jul 27 06:22:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Fri Jul 27 06:22:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src44.csv
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Fri Jul 27 06:22:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src44.csv
[Fri Jul 27 06:22:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:23:29 2012] Spatial fit model total counts = 3595.940000, observed total counts = 3009.000000
[Fri Jul 27 06:23:29 2012] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 19
[Sat Jul 28 03:09:44 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Sat Jul 28 03:09:44 2012] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.892
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 8.63"
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src41.ximg exists
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Jul 28 11:59:40 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src41 appears to have run properly
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Jul 28 11:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Jul 28 11:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Jul 28 11:59:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:01:25 2012] Source 35 is offset by -2.448329 and 1.564319 pixels which is larger than
2 X fitted extent = 1.395618 x 1.395618, not incorporating fit results
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:49:00 2012] XMMSAS src. selection expression = ellipse(29858.432343, 29415.037140, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 16:49:00 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src35_src.reg
[Mon Jul 30 16:49:00 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (306, 301) - (381, 376)
[Mon Jul 30 16:49:00 2012] XMMSAS bgd. selection expression = annulus(29858.432343, 29415.037140, 1087.500000, 2175.000000, X, Y) && !ellipse(27201.396000, 24998.666000, 2377.040068, 2377.040068, 0.000000, X, Y) && !ellipse(29716.462309, 27219.008942, 1144.048033, 651.939369, 269.000204, X, Y) && !ellipse(27630.492531, 26864.210843, 1169.232034, 694.158968, 112.633139, X, Y) && !ellipse(29585.552000, 32482.072000, 1539.360044, 1539.360044, 0.000000, X, Y) && !ellipse(28764.794000, 34026.440000, 3264.240094, 1657.896048, 67.698000, X, Y) && !ellipse(29811.261400, 30461.262000, 1444.288042, 1444.288042, 0.000000, X, Y) && !ellipse(30020.144000, 31474.110000, 3078.720089, 3078.720089, 0.000000, X, Y) && !ellipse(31829.897797, 28789.164429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29528.438000, 26858.628000, 801.896023, 801.896023, 0.000000, X, Y) && !ellipse(31294.912048, 28024.131012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31980.536194, 28411.258179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28367.124000, 27643.248600, 1264.296036, 1264.296036, 0.000000, X, Y) && !ellipse(31075.144000, 26908.038000, 1408.784041, 1408.784041, 0.000000, X, Y) && !ellipse(31171.585938, 30405.649811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31020.128440, 26650.998000, 1819.416052, 1819.416052, 0.000000, X, Y) && !ellipse(28960.581085, 27712.738556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31444.161865, 27363.833191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31701.804960, 31027.965800, 671.052819, 671.052819, 0.000000, X, Y) && !ellipse(31140.938934, 29360.818787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31467.632324, 31531.220276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30824.711670, 28383.916687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31650.871826, 30315.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32149.311096, 27403.127625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30911.030340, 26136.584000, 1363.376039, 1363.376039, 0.000000, X, Y) && !ellipse(31143.716095, 32128.328400, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:49:00 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src35.gif
[Mon Jul 30 19:14:38 2012] Mean detx,y = (6355.19, -919.01) 
[Mon Jul 30 19:14:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 19:14:59 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 19:15:00 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Jul 30 19:15:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue Jul 31 01:51:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 31 01:51:33 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:51 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:51 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jul 31 04:18:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:54 2012] Using photon index=1.80, rate=0.033, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src35.arf
[Tue Jul 31 04:18:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:54 2012] Updating source flux to 5.4e-13
[Tue Jul 31 04:29:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting