[Thu Jul 26 09:13:21 2012] Detection parameters:
  Position = (245.0, 259.0) = 14 41 33.64 -62 44 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 847.9 +/- 41.4
  Background counts = 136.0
  Rate = 0.08 +/- 0.004

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 4.82'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Fri Jul 27 00:31:49 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.170
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 8.84"
[Fri Jul 27 06:22:16 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src16.ximg exists
[Fri Jul 27 06:22:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src16.csv
[Fri Jul 27 06:22:16 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Jul 27 06:22:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src16.csv
[Fri Jul 27 06:22:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Jul 27 06:22:18 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Jul 27 06:23:28 2012] Warning, spatial fit 16 centroid is now closest to src. 52
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 52
[Sat Jul 28 03:09:44 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Sat Jul 28 03:09:44 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.170
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 8.84"
[Sat Jul 28 11:59:39 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jul 28 11:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src15.csv
[Sat Jul 28 11:59:39 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jul 28 11:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src15.csv
[Sat Jul 28 11:59:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:42 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jul 28 11:59:42 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jul 28 11:59:42 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Jul 28 12:01:25 2012] Warning, spatial fit 15 centroid is now closest to src. 52
[Sat Jul 28 12:01:25 2012] Spatial fit model total counts = 8429.280000, observed total counts = 8430.000000
[Sat Jul 28 12:01:25 2012] Offset between fit and detection position for source 25 = 4.428495 pixels
[Sat Jul 28 12:01:25 2012] Warning, changing simple spatial fit ID from 15 to 33
[Sat Jul 28 12:01:25 2012] 8163.490000 total counts/ 1526.030000 bgd. counts: snr = 169.910564
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 4.428495 pixels
  Position = (248.9, 260.9) = 14 41 31.13 -62 44 13.1
  Extent = 36.6 (36.5-73.2)", rotation angle = 0
  Source counts = 6637.5 +/- 90.4
  Background counts = 1526.0
  Rate = 0.6 +/- 0.008
[Sat Jul 28 12:01:25 2012] Spatial fit model total counts = 1605.570000, observed total counts = 1605.000000
[Sat Jul 28 12:01:25 2012] Offset between fit and detection position for source 25 = 4.054648 pixels
[Sat Jul 28 12:01:25 2012] Warning, changing simple spatial fit ID from 33 to 98
[Sat Jul 28 12:01:25 2012] 1658.052000 total counts/ 1279.420000 bgd. counts: snr = 10.585485
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 4.054648 pixels
  Position = (250.4, 257.2) = 14 41 30.21 -62 44 29.5
  Extent = 17.8 (17.7-35.5)", rotation angle = 0
  Source counts = 378.6 +/- 40.7
  Background counts = 1279.4
  Rate = 0.03 +/- 0.003
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:48:58 2012] XMMSAS src. selection expression = ellipse(21736.538000, 22325.070000, 1065.852031, 1065.852031, 0.000000, X, Y)
[Mon Jul 30 16:48:58 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src25_src.reg
[Mon Jul 30 16:48:58 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (189, 196) - (312, 318)
[Mon Jul 30 16:48:58 2012] XMMSAS bgd. selection expression = annulus(21736.538000, 22325.070000, 1776.420051, 3552.840102, X, Y) && !ellipse(23830.074000, 23345.096000, 2527.072073, 2527.072073, 0.000000, X, Y) && !ellipse(25787.741425, 24161.838654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.396000, 24998.666000, 2377.040068, 2377.040068, 0.000000, X, Y) && !ellipse(23279.902000, 22969.946000, 1263.536036, 1263.536036, 0.000000, X, Y) && !ellipse(22196.760800, 23001.016000, 1357.184039, 1357.184039, 0.000000, X, Y) && !ellipse(16728.654000, 20423.942000, 1761.504051, 1761.504051, 0.000000, X, Y) && !ellipse(20812.428000, 22372.156800, 1413.984041, 1413.984041, 0.000000, X, Y) && !ellipse(21426.930000, 25747.082000, 1041.608030, 556.487216, 325.708000, X, Y) && !ellipse(22328.493134, 26206.479370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16651.982000, 24902.634200, 1666.800048, 1666.800048, 0.000000, X, Y) && !ellipse(17906.326782, 25807.654144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23192.820000, 25343.180000, 791.939223, 791.939223, 0.000000, X, Y) && !ellipse(20038.658000, 24807.391200, 1451.912042, 1451.912042, 0.000000, X, Y) && !ellipse(19414.148000, 24440.360000, 2903.824084, 1715.368049, 344.151000, X, Y) && !ellipse(18172.168600, 26254.465600, 1538.432044, 1538.432044, 0.000000, X, Y) && !ellipse(19083.124000, 23884.780000, 1486.544043, 1486.544043, 0.000000, X, Y) && !ellipse(20519.872000, 24298.360000, 1370.448039, 1370.448039, 0.000000, X, Y) && !ellipse(21150.862000, 24934.255600, 2581.600074, 1583.024046, 312.067000, X, Y) && !ellipse(25069.586800, 26613.573000, 861.680025, 861.680025, 0.000000, X, Y) && !ellipse(17374.652000, 25752.790000, 1019.248029, 1019.248029, 0.000000, X, Y) && !ellipse(23788.305237, 24656.481232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21798.675400, 26388.869263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25275.867706, 22763.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.250580, 26125.753204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19658.504074, 23079.654022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21160.946000, 26728.314000, 940.448027, 940.448027, 0.000000, X, Y) && !ellipse(23130.840332, 21713.340103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.802000, 22104.886000, 1614.048046, 1614.048046, 0.000000, X, Y) && !ellipse(21966.535645, 21547.392807, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:48:58 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src25.gif
[Mon Jul 30 18:06:36 2012] Mean detx,y = (-4108.63, -2592.56) 
[Mon Jul 30 18:06:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 18:07:01 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 18:07:01 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Jul 30 18:07:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Jul 31 04:18:50 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:50 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jul 31 04:18:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:54 2012] Using photon index=1.80, rate=0.0315, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src25.arf
[Tue Jul 31 04:18:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:54 2012] Updating source flux to 3.5e-13
[Tue Jul 31 04:29:23 2012] Flag c found in src. 25 procflags, skipping spectral fitting