[Thu Jul 26 09:13:21 2012] Detection parameters:
  Position = (320.2, 293.0) = 14 40 46.03 -62 41 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1060.7 +/- 49.6
  Background counts = 227.0
  Rate = 0.09 +/- 0.004

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 1.63'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Fri Jul 27 00:31:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.800
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.24"
[Fri Jul 27 06:22:16 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul 27 06:22:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src13.csv
[Fri Jul 27 06:22:16 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul 27 06:22:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src13.csv
[Fri Jul 27 06:22:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul 27 06:22:18 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jul 27 06:23:28 2012] Warning, spatial fit 13 centroid is now closest to src. 3
[Fri Jul 27 06:23:28 2012] Spatial fit model total counts = 7893.760000, observed total counts = 7913.000000
[Fri Jul 27 06:23:28 2012] Offset between fit and detection position for source 12 = 1.648671 pixels
[Fri Jul 27 06:23:28 2012] Warning, changing simple spatial fit ID from 13 to 19
[Fri Jul 27 06:23:28 2012] 7541.510000 total counts/ 6388.410000 bgd. counts: snr = 14.426819
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.648671 pixels
  Position = (321.8, 293.3) = 14 40 45.00 -62 41 52.6
  Extent = 14.9 (14.8-29.7)", rotation angle = 0
  Source counts = 1153.1 +/- 86.8
  Background counts = 6388.4
  Rate = 0.1 +/- 0.007
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 3
[Sat Jul 28 03:09:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 14.86"
[Sat Jul 28 03:09:44 2012] source mask rpix=3.4, npix_max = 61, mask sum = 58, frac = 0.946
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 14.86"
[Sat Jul 28 11:59:39 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src12.ximg exists
[Sat Jul 28 11:59:39 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Jul 28 11:59:39 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src12 appears to have run properly
[Sat Jul 28 11:59:42 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Jul 28 11:59:42 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Jul 28 11:59:42 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Jul 28 12:01:25 2012] Warning, spatial fit 12 centroid is now closest to src. 3
[Sat Jul 28 12:01:25 2012] Spatial fit model total counts = 7905.940000, observed total counts = 7913.000000
[Sat Jul 28 12:01:25 2012] Offset between fit and detection position for source 12 = 0.302972 pixels
[Sat Jul 28 12:01:25 2012] Warning, changing simple spatial fit ID from 12 to 18
[Sat Jul 28 12:01:25 2012] 6810.000000 total counts/ 5668.120000 bgd. counts: snr = 15.167044
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.302972 pixels
  Position = (322.1, 293.1) = 14 40 44.86 -62 41 53.5
  Extent = 14.9 (14.8-29.7)", rotation angle = 0
  Source counts = 1141.9 +/- 82.5
  Background counts = 5668.1
  Rate = 0.09 +/- 0.007
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:48:58 2012] Counts = 1141.880000, rescaling region sizes by 2.000000
[Mon Jul 30 16:48:58 2012] XMMSAS src. selection expression = ellipse(27971.976000, 25449.060000, 1782.780051, 1782.780051, 0.000000, X, Y)
[Mon Jul 30 16:48:58 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src12_src.reg
[Mon Jul 30 16:48:58 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (220, 191) - (425, 396)
[Mon Jul 30 16:48:58 2012] XMMSAS bgd. selection expression = annulus(27971.976000, 25449.060000, 5942.600171, 11885.200342, X, Y) && !ellipse(23830.074000, 23345.096000, 2527.072073, 2527.072073, 0.000000, X, Y) && !ellipse(25787.741425, 24161.838654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.396000, 24998.666000, 2377.040068, 2377.040068, 0.000000, X, Y) && !ellipse(29716.462309, 27219.008942, 1144.048033, 651.939369, 269.000204, X, Y) && !ellipse(23279.902000, 22969.946000, 1263.536036, 1263.536036, 0.000000, X, Y) && !ellipse(26338.978000, 25606.203660, 758.432822, 758.432822, 0.000000, X, Y) && !ellipse(29016.089600, 33352.085860, 971.056028, 971.056028, 0.000000, X, Y) && !ellipse(28784.286084, 25741.112124, 1217.448035, 995.158491, -0.000000, X, Y) && !ellipse(27630.492531, 26864.210843, 1169.232034, 694.158968, 112.633139, X, Y) && !ellipse(29585.552000, 32482.072000, 1539.360044, 1539.360044, 0.000000, X, Y) && !ellipse(22196.760800, 23001.016000, 1357.184039, 1357.184039, 0.000000, X, Y) && !ellipse(28764.794000, 34026.440000, 3264.240094, 1657.896048, 67.698000, X, Y) && !ellipse(21736.538000, 22325.070000, 1421.136041, 1421.136041, 0.000000, X, Y) && !ellipse(29811.261400, 30461.262000, 1444.288042, 1444.288042, 0.000000, X, Y) && !ellipse(30020.144000, 31474.110000, 3078.720089, 3078.720089, 0.000000, X, Y) && !ellipse(28305.354370, 25703.980560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31829.897797, 28789.164429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14507.041200, 22086.529360, 1697.224049, 1697.224049, 0.000000, X, Y) && !ellipse(29528.438000, 26858.628000, 801.896023, 801.896023, 0.000000, X, Y) && !ellipse(29776.005200, 34415.020000, 1606.880046, 1606.880046, 0.000000, X, Y) && !ellipse(16728.654000, 20423.942000, 1761.504051, 1761.504051, 0.000000, X, Y) && !ellipse(27560.254000, 25047.642000, 1643.376047, 1389.944040, 325.434000, X, Y) && !ellipse(31294.912048, 28024.131012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15343.523911, 20827.116547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31980.536194, 28411.258179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16312.005585, 20563.687195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28367.124000, 27643.248600, 1264.296036, 1264.296036, 0.000000, X, Y) && !ellipse(31075.144000, 26908.038000, 1408.784041, 1408.784041, 0.000000, X, Y) && !ellipse(31171.585938, 30405.649811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31020.128440, 26650.998000, 1819.416052, 1819.416052, 0.000000, X, Y) && !ellipse(20812.428000, 22372.156800, 1413.984041, 1413.984041, 0.000000, X, Y) && !ellipse(28960.581085, 27712.738556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31444.161865, 27363.833191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29138.034000, 35019.410000, 1684.752048, 1684.752048, 0.000000, X, Y) && !ellipse(31701.804960, 31027.965800, 671.052819, 671.052819, 0.000000, X, Y) && !ellipse(31140.938934, 29360.818787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21426.930000, 25747.082000, 1041.608030, 556.487216, 325.708000, X, Y) && !ellipse(29858.432343, 29415.037140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22328.493134, 26206.479370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16651.982000, 24902.634200, 1666.800048, 1666.800048, 0.000000, X, Y) && !ellipse(17906.326782, 25807.654144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31467.632324, 31531.220276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30824.711670, 28383.916687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31650.871826, 30315.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23192.820000, 25343.180000, 791.939223, 791.939223, 0.000000, X, Y) && !ellipse(20038.658000, 24807.391200, 1451.912042, 1451.912042, 0.000000, X, Y) && !ellipse(28526.866000, 23725.466000, 2543.296073, 2543.296073, 0.000000, X, Y) && !ellipse(28079.414000, 34440.376000, 1632.120047, 1632.120047, 0.000000, X, Y) && !ellipse(23743.793671, 27358.499237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19414.148000, 24440.360000, 2903.824084, 1715.368049, 344.151000, X, Y) && !ellipse(32149.311096, 27403.127625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18172.168600, 26254.465600, 1538.432044, 1538.432044, 0.000000, X, Y) && !ellipse(19083.124000, 23884.780000, 1486.544043, 1486.544043, 0.000000, X, Y) && !ellipse(20519.872000, 24298.360000, 1370.448039, 1370.448039, 0.000000, X, Y) && !ellipse(21150.862000, 24934.255600, 2581.600074, 1583.024046, 312.067000, X, Y) && !ellipse(29553.242035, 36844.987946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29619.978851, 37861.412811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29631.095459, 37455.296875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25069.586800, 26613.573000, 861.680025, 861.680025, 0.000000, X, Y) && !ellipse(31186.704000, 23896.780000, 1411.168041, 1411.168041, 0.000000, X, Y) && !ellipse(30911.030340, 26136.584000, 1363.376039, 1363.376039, 0.000000, X, Y) && !ellipse(17374.652000, 25752.790000, 1019.248029, 1019.248029, 0.000000, X, Y) && !ellipse(29268.556000, 24002.443200, 1271.648037, 1271.648037, 0.000000, X, Y) && !ellipse(26645.313232, 26832.113129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23788.305237, 24656.481232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31143.716095, 32128.328400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30091.681600, 24234.022600, 1318.816038, 1318.816038, 0.000000, X, Y) && !ellipse(21798.675400, 26388.869263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29871.228000, 24212.943200, 1352.208039, 1352.208039, 0.000000, X, Y) && !ellipse(31447.472687, 24388.100250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25275.867706, 22763.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29923.002655, 33608.969208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.250580, 26125.753204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30470.384000, 36188.230000, 1784.864051, 1784.864051, 0.000000, X, Y) && !ellipse(28215.614380, 35773.503082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19658.504074, 23079.654022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21160.946000, 26728.314000, 940.448027, 940.448027, 0.000000, X, Y) && !ellipse(23130.840332, 21713.340103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.817600, 21008.453000, 1360.624039, 1360.624039, 0.000000, X, Y) && !ellipse(22784.990906, 27736.660370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.802000, 22104.886000, 1614.048046, 1614.048046, 0.000000, X, Y) && !ellipse(23647.100159, 28022.222046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21966.535645, 21547.392807, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:48:58 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src12.gif
[Mon Jul 30 17:43:48 2012] Mean detx,y = (2178.17, -34.41) 
[Mon Jul 30 17:43:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 17:48:55 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 17:48:55 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jul 30 17:48:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jul 31 04:18:49 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:50 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jul 31 04:18:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:53 2012] Using photon index=1.80, rate=0.0949, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src12.arf
[Tue Jul 31 04:18:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:53 2012] Updating source flux to 8.8e-13
[Tue Jul 31 04:29:23 2012] Flag c found in src. 12 procflags, skipping spectral fitting