[Thu Jul 26 09:13:23 2012] Detection parameters:
  Position = (226.5, 265.8) = 14 41 45.32 -62 43 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.0 +/- 21.8
  Background counts = 193.1
  Rate = 0.01 +/- 0.002

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 5.72'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Fri Jul 27 00:31:49 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.900
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 9.29"
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src93.ximg exists
[Fri Jul 27 06:22:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src93.csv
[Fri Jul 27 06:22:18 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src93_1.ximg exists
[Fri Jul 27 06:22:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src93.csv
[Fri Jul 27 06:22:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:20 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Fri Jul 27 06:22:20 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Fri Jul 27 06:22:20 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Fri Jul 27 06:23:29 2012] Warning, spatial fit 93 centroid is now closest to src. 102
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 102
[Sat Jul 28 03:09:44 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Sat Jul 28 03:09:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.900
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 87 for pass 1, mean size = 9.29"
[Sat Jul 28 11:59:41 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src87.ximg exists
[Sat Jul 28 11:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src87.csv
[Sat Jul 28 11:59:41 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src87_1.ximg exists
[Sat Jul 28 11:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src87.csv
[Sat Jul 28 11:59:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:44 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Sat Jul 28 11:59:44 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Sat Jul 28 11:59:44 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Sat Jul 28 12:01:25 2012] Source 105 is offset by -6.505447 and 6.564184 pixels which is larger than
2 X fitted extent = 2.942699 x 2.942699, not incorporating fit results
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:49:03 2012] XMMSAS src. selection expression = ellipse(19658.504074, 23079.654022, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 16:49:03 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src105_src.reg
[Mon Jul 30 16:49:03 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (189, 228) - (264, 303)
[Mon Jul 30 16:49:04 2012] XMMSAS bgd. selection expression = annulus(19658.504074, 23079.654022, 1087.500000, 2175.000000, X, Y) && !ellipse(23830.074000, 23345.096000, 2527.072073, 2527.072073, 0.000000, X, Y) && !ellipse(22196.760800, 23001.016000, 1357.184039, 1357.184039, 0.000000, X, Y) && !ellipse(21736.538000, 22325.070000, 1421.136041, 1421.136041, 0.000000, X, Y) && !ellipse(16728.654000, 20423.942000, 1761.504051, 1761.504051, 0.000000, X, Y) && !ellipse(20812.428000, 22372.156800, 1413.984041, 1413.984041, 0.000000, X, Y) && !ellipse(21426.930000, 25747.082000, 1041.608030, 556.487216, 325.708000, X, Y) && !ellipse(16651.982000, 24902.634200, 1666.800048, 1666.800048, 0.000000, X, Y) && !ellipse(17906.326782, 25807.654144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20038.658000, 24807.391200, 1451.912042, 1451.912042, 0.000000, X, Y) && !ellipse(19414.148000, 24440.360000, 2903.824084, 1715.368049, 344.151000, X, Y) && !ellipse(18172.168600, 26254.465600, 1538.432044, 1538.432044, 0.000000, X, Y) && !ellipse(19083.124000, 23884.780000, 1486.544043, 1486.544043, 0.000000, X, Y) && !ellipse(20519.872000, 24298.360000, 1370.448039, 1370.448039, 0.000000, X, Y) && !ellipse(21150.862000, 24934.255600, 2581.600074, 1583.024046, 312.067000, X, Y) && !ellipse(17374.652000, 25752.790000, 1019.248029, 1019.248029, 0.000000, X, Y) && !ellipse(18634.802000, 22104.886000, 1614.048046, 1614.048046, 0.000000, X, Y) && !ellipse(21966.535645, 21547.392807, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:49:04 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src105.gif
[Mon Jul 30 20:04:33 2012] Mean detx,y = (-5047.36, -4485.33) 
[Mon Jul 30 20:04:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 20:04:46 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 20:04:46 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Mon Jul 30 20:04:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Tue Jul 31 04:01:09 2012] Not generating rmf since there are only 96 counts
[Tue Jul 31 04:01:09 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:53 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:53 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Tue Jul 31 04:18:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:56 2012] Using photon index=1.80, rate=0.00987, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src105.arf
[Tue Jul 31 04:18:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:56 2012] Updating source flux to 1.3e-13
[Tue Jul 31 04:29:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting