[Thu Jul 26 09:13:23 2012] Detection parameters:
  Position = (163.8, 264.6) = 14 42 25.01 -62 43 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.0 +/- 21.2
  Background counts = 116.5
  Rate = 0.02 +/- 0.003

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 10.06'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 11.46"
[Fri Jul 27 00:31:49 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.916
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 11.46"
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src70.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src70.csv
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src70_1.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src70.csv
[Fri Jul 27 06:22:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:20 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Fri Jul 27 06:22:20 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Fri Jul 27 06:22:20 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Fri Jul 27 06:23:29 2012] Spatial fit model total counts = -0.064632, observed total counts = 1820.000000
[Fri Jul 27 06:23:29 2012] Poor agreement between spatial fit and data for source 104
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 06:23:29 2012] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 104 at 11.490003 pixels away
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 26
[Sat Jul 28 03:09:44 2012] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 11.46"
[Sat Jul 28 03:09:44 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.916
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 11.46"
[Sat Jul 28 11:59:41 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src65.ximg exists
[Sat Jul 28 11:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src65.csv
[Sat Jul 28 11:59:41 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src65_1.ximg exists
[Sat Jul 28 11:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src65.csv
[Sat Jul 28 11:59:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Sat Jul 28 11:59:43 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Sat Jul 28 12:01:25 2012] Source 104 is offset by -8.646082 and -3.742085 pixels which is larger than
2 X fitted extent = 2.421393 x 2.421393, not incorporating fit results
[Sat Jul 28 12:01:25 2012] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 104 at 10.495722 pixels away
[Sat Jul 28 12:01:25 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 104 at 10.943881 pixels away
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:49:02 2012] XMMSAS src. selection expression = ellipse(14203.338837, 22975.794586, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 30 16:49:02 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src104_src.reg
[Mon Jul 30 16:49:02 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (126, 227) - (201, 302)
[Mon Jul 30 16:49:02 2012] XMMSAS bgd. selection expression = annulus(14203.338837, 22975.794586, 1087.500000, 2175.000000, X, Y) && !ellipse(14507.041200, 22086.529360, 1697.224049, 1697.224049, 0.000000, X, Y) && !ellipse(16728.654000, 20423.942000, 1761.504051, 1761.504051, 0.000000, X, Y) && !ellipse(15343.523911, 20827.116547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16312.005585, 20563.687195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16651.982000, 24902.634200, 1666.800048, 1666.800048, 0.000000, X, Y) && !ellipse(12899.420761, 23339.862823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17374.652000, 25752.790000, 1019.248029, 1019.248029, 0.000000, X, Y) && !ellipse(12963.270000, 20707.226000, 1904.448055, 1904.448055, 0.000000, X, Y) && !ellipse(14110.803101, 21183.495819, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:49:02 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src104.gif
[Mon Jul 30 19:56:25 2012] Mean detx,y = (-8765.40, -8503.03) 
[Mon Jul 30 19:56:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 19:56:47 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 19:56:47 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Mon Jul 30 19:56:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Tue Jul 31 03:15:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 31 03:15:09 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:52 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:52 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Tue Jul 31 04:18:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:55 2012] Using photon index=1.80, rate=0.0178, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src104.arf
[Tue Jul 31 04:18:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:55 2012] Updating source flux to 3.2e-13
[Tue Jul 31 04:29:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting