[Thu Jul 26 09:13:22 2012] Detection parameters:
  Position = (221.0, 275.1) = 14 41 48.81 -62 43 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.1 +/- 28.0
  Background counts = 231.6
  Rate = 0.02 +/- 0.003

[Thu Jul 26 09:13:23 2012] Off-axis axis estimate = 5.87'
[Fri Jul 27 00:31:49 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:31:49 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Fri Jul 27 00:31:49 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.280
[Fri Jul 27 00:31:49 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 9.36"
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src63.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src63.csv
[Fri Jul 27 06:22:17 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src63_1.ximg exists
[Fri Jul 27 06:22:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src63.csv
[Fri Jul 27 06:22:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Fri Jul 27 06:22:19 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Fri Jul 27 06:22:19 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Fri Jul 27 06:23:29 2012] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 102 at 10.633973 pixels away
[Fri Jul 27 06:23:29 2012] Spatial fit model total counts = 2525.270000, observed total counts = 2518.000000
[Fri Jul 27 06:23:29 2012] Offset between fit and detection position for source 102 = 1.073949 pixels
[Fri Jul 27 06:23:29 2012] Warning, changing simple spatial fit ID from 63 to 93
[Fri Jul 27 06:23:29 2012] 2522.631000 total counts/ 2049.000000 bgd. counts: snr = 10.463311
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 1.073949 pixels
  Position = (219.9, 275.1) = 14 41 49.49 -62 43 11.2
  Extent = 18.6 (18.5-37.2)", rotation angle = 0
  Source counts = 473.6 +/- 50.2
  Background counts = 2049.0
  Rate = 0.04 +/- 0.004
[Fri Jul 27 06:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:29 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:23:29 2012] Source does appear to be extended
[Fri Jul 27 06:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:29 2012] Source is confused with source 68
[Fri Jul 27 06:23:29 2012] Source is confused with source 105
[Sat Jul 28 03:09:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:09:44 2012] Initial guess for spatial extent in simple fitting = 18.58"
[Sat Jul 28 03:09:44 2012] source mask rpix=4.3, npix_max = 91, mask sum = 100, frac = 1.098
[Sat Jul 28 03:09:44 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 18.58"
[Sat Jul 28 11:59:40 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src58.ximg exists
[Sat Jul 28 11:59:41 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src58_1.ximg exists
[Sat Jul 28 11:59:41 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_src58 appears to have run properly
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sat Jul 28 11:59:43 2012] fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sat Jul 28 11:59:43 2012] Fit fullrun_mos2_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Sat Jul 28 12:01:25 2012] Warning, spatial fit 58 centroid is now closest to src. 45
[Sat Jul 28 12:01:25 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:01:25 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:01:25 2012] Source does appear to be extended
[Sat Jul 28 12:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 16:49:02 2012] XMMSAS src. selection expression = ellipse(19083.124000, 23884.780000, 1114.908032, 1114.908032, 0.000000, X, Y)
[Mon Jul 30 16:49:02 2012] Writing source region out to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src102_src.reg
[Mon Jul 30 16:49:02 2012] Extracting stamp from image fullrun_mos2_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (156, 211) - (284, 339)
[Mon Jul 30 16:49:02 2012] XMMSAS bgd. selection expression = annulus(19083.124000, 23884.780000, 1858.180053, 3716.360107, X, Y) && !ellipse(23830.074000, 23345.096000, 2527.072073, 2527.072073, 0.000000, X, Y) && !ellipse(23279.902000, 22969.946000, 1263.536036, 1263.536036, 0.000000, X, Y) && !ellipse(22196.760800, 23001.016000, 1357.184039, 1357.184039, 0.000000, X, Y) && !ellipse(21736.538000, 22325.070000, 1421.136041, 1421.136041, 0.000000, X, Y) && !ellipse(14507.041200, 22086.529360, 1697.224049, 1697.224049, 0.000000, X, Y) && !ellipse(16728.654000, 20423.942000, 1761.504051, 1761.504051, 0.000000, X, Y) && !ellipse(15343.523911, 20827.116547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16312.005585, 20563.687195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20812.428000, 22372.156800, 1413.984041, 1413.984041, 0.000000, X, Y) && !ellipse(21426.930000, 25747.082000, 1041.608030, 556.487216, 325.708000, X, Y) && !ellipse(22328.493134, 26206.479370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16651.982000, 24902.634200, 1666.800048, 1666.800048, 0.000000, X, Y) && !ellipse(17906.326782, 25807.654144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23192.820000, 25343.180000, 791.939223, 791.939223, 0.000000, X, Y) && !ellipse(20038.658000, 24807.391200, 1451.912042, 1451.912042, 0.000000, X, Y) && !ellipse(19414.148000, 24440.360000, 2903.824084, 1715.368049, 344.151000, X, Y) && !ellipse(18172.168600, 26254.465600, 1538.432044, 1538.432044, 0.000000, X, Y) && !ellipse(20519.872000, 24298.360000, 1370.448039, 1370.448039, 0.000000, X, Y) && !ellipse(21150.862000, 24934.255600, 2581.600074, 1583.024046, 312.067000, X, Y) && !ellipse(17374.652000, 25752.790000, 1019.248029, 1019.248029, 0.000000, X, Y) && !ellipse(21798.675400, 26388.869263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19658.504074, 23079.654022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21160.946000, 26728.314000, 940.448027, 940.448027, 0.000000, X, Y) && !ellipse(23130.840332, 21713.340103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22784.990906, 27736.660370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.802000, 22104.886000, 1614.048046, 1614.048046, 0.000000, X, Y) && !ellipse(23647.100159, 28022.222046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21966.535645, 21547.392807, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 16:49:02 2012] Writing fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src102.gif
[Mon Jul 30 19:41:41 2012] Mean detx,y = (-4731.92, -5499.43) 
[Mon Jul 30 19:41:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 19:42:01 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 19:42:02 2012] Setting source spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Mon Jul 30 19:42:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Tue Jul 31 04:18:51 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:52 2012] Error reading totcts from fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Tue Jul 31 04:18:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:55 2012] Using photon index=1.80, rate=0.0394, arf fullrun_mos2_xmm0110012501_pi300-10000_pass1_cl_src102.arf
[Tue Jul 31 04:18:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:55 2012] Updating source flux to 4.8e-13
[Tue Jul 31 04:29:23 2012] Flag c found in src. 102 procflags, skipping spectral fitting