[Thu Jul 26 09:12:24 2012] Detection parameters:
  Position = (350.9, 321.9) = 14 40 26.65 -62 39 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.6 +/- 27.8
  Background counts = 206.0
  Rate = 0.02 +/- 0.003

[Thu Jul 26 09:12:25 2012] Off-axis axis estimate = 4.17'
[Thu Jul 26 17:30:46 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 17:30:46 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Thu Jul 26 17:30:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.035
[Thu Jul 26 17:30:46 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 8.51"
[Fri Jul 27 00:31:46 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src59.ximg exists
[Fri Jul 27 00:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src59.csv
[Fri Jul 27 00:31:46 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src59_1.ximg exists
[Fri Jul 27 00:31:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src59.csv
[Fri Jul 27 00:31:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 00:31:48 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Fri Jul 27 00:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src59.csv
[Fri Jul 27 00:31:48 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Fri Jul 27 00:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src59.csv
[Fri Jul 27 00:31:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:23:07 2012] Source 89 is offset by 7.746335 and -1.094503 pixels which is larger than
2 X fitted extent = 6.881380 x 6.881380, not incorporating fit results
[Fri Jul 27 06:23:08 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:08 2012] Assessing source extent using major
[Fri Jul 27 06:23:08 2012] Source does appear to be extended
[Fri Jul 27 06:23:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:08 2012] Source is confused with source 50
[Fri Jul 27 16:50:35 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 16:50:35 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Fri Jul 27 16:50:35 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.035
[Fri Jul 27 16:50:35 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 8.51"
[Sat Jul 28 03:09:39 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src57.ximg exists
[Sat Jul 28 03:09:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src57.csv
[Sat Jul 28 03:09:39 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src57_1.ximg exists
[Sat Jul 28 03:09:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src57.csv
[Sat Jul 28 03:09:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:09:42 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Sat Jul 28 03:09:42 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Sat Jul 28 03:09:42 2012] Fit fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Sat Jul 28 12:00:56 2012] Warning, spatial fit 57 centroid is now closest to src. 33
[Sat Jul 28 12:00:56 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:56 2012] Assessing source extent using major
[Sat Jul 28 12:00:56 2012] Source does appear to be extended
[Sat Jul 28 12:00:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 07:50:06 2012] XMMSAS src. selection expression = ellipse(30481.387177, 27960.006744, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 29 07:50:06 2012] Writing source region out to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src89_src.reg
[Sun Jul 29 07:50:06 2012] Extracting stamp from image fullrun_mos1_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (313, 284) - (388, 359)
[Sun Jul 29 07:50:06 2012] XMMSAS bgd. selection expression = annulus(30481.387177, 27960.006744, 1087.500000, 2175.000000, X, Y) && !ellipse(27434.688000, 25075.573400, 1876.128054, 880.752025, 328.119000, X, Y) && !ellipse(29685.068600, 27256.303200, 1009.304029, 1009.304029, 0.000000, X, Y) && !ellipse(28742.709360, 25726.463800, 1217.656035, 1217.656035, 0.000000, X, Y) && !ellipse(29220.427740, 32944.037200, 3120.064090, 1290.512037, 61.864000, X, Y) && !ellipse(27759.646000, 26954.518000, 600.073617, 600.073617, 0.000000, X, Y) && !ellipse(29937.797800, 30812.520600, 876.024025, 876.024025, 0.000000, X, Y) && !ellipse(32042.004200, 28917.336000, 1489.488043, 1489.488043, 0.000000, X, Y) && !ellipse(29197.504000, 25939.924600, 2435.312070, 2435.312070, 0.000000, X, Y) && !ellipse(29856.624268, 28745.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29761.324400, 29705.884000, 1152.744033, 364.281610, 90.000000, X, Y) && !ellipse(28705.177887, 27705.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31101.488000, 30589.926000, 524.620015, 524.620015, 0.000000, X, Y) && !ellipse(31111.578000, 27809.004000, 1360.320039, 1360.320039, 0.000000, X, Y) && !ellipse(31069.885600, 27215.934200, 1263.312036, 1263.312036, 0.000000, X, Y) && !ellipse(31500.039612, 27257.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30738.343567, 29576.847900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31271.727000, 26563.764000, 717.111221, 717.111221, 0.000000, X, Y) && !ellipse(30999.063440, 30475.382000, 1114.096032, 1114.096032, 0.000000, X, Y) && !ellipse(31966.884033, 29259.234711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28099.636000, 27280.724000, 1249.552036, 1249.552036, 0.000000, X, Y) && !ellipse(30437.435822, 28551.109192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31659.601562, 30846.496185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.462000, 31340.258000, 1533.256044, 1533.256044, 0.000000, X, Y)
[Sun Jul 29 07:50:06 2012] Writing fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src89.gif
[Sun Jul 29 10:10:19 2012] Mean detx,y = (657.34, -5837.09) 
[Sun Jul 29 10:10:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 10:10:37 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 10:10:38 2012] Setting source spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src89_src_b10.pi.gz
[Sun Jul 29 10:10:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src89_bgd.pi.gz
[Mon Jul 30 15:03:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 30 15:03:53 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:44 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:44 2012] Error reading totcts from fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src89_src_b10.pi.gz
[Tue Jul 31 04:18:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:48 2012] Using photon index=1.80, rate=0.0242, arf fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src89.arf
[Tue Jul 31 04:18:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:48 2012] Updating source flux to 3.2e-13
[Tue Jul 31 04:19:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting