[Thu Jul 26 09:12:23 2012] Detection parameters:
  Position = (350.4, 328.7) = 14 40 26.98 -62 39 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.0 +/- 28.5
  Background counts = 228.5
  Rate = 0.03 +/- 0.004

[Thu Jul 26 09:12:25 2012] Off-axis axis estimate = 4.36'
[Thu Jul 26 17:30:46 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 17:30:46 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Thu Jul 26 17:30:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Thu Jul 26 17:30:46 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 8.61"
[Fri Jul 27 00:31:45 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src50.ximg exists
[Fri Jul 27 00:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src50.csv
[Fri Jul 27 00:31:45 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri Jul 27 00:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src50.csv
[Fri Jul 27 00:31:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 00:31:48 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri Jul 27 00:31:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Jul 27 00:31:48 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri Jul 27 00:31:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Jul 27 00:31:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:23:07 2012] Warning, spatial fit 50 centroid is now closest to src. 27
[Fri Jul 27 06:23:08 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:08 2012] Assessing source extent using major
[Fri Jul 27 06:23:08 2012] Source does appear to be extended
[Fri Jul 27 06:23:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:08 2012] Source is confused with source 27
[Fri Jul 27 16:50:35 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 16:50:35 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Fri Jul 27 16:50:35 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Fri Jul 27 16:50:35 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 8.61"
[Sat Jul 28 03:09:38 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src48.ximg exists
[Sat Jul 28 03:09:38 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src48_1.ximg exists
[Sat Jul 28 03:09:38 2012] Fit fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src48 appears to have run properly
[Sat Jul 28 03:09:42 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sat Jul 28 03:09:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Jul 28 03:09:42 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sat Jul 28 03:09:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Jul 28 03:09:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:00:56 2012] Warning, spatial fit 48 centroid is now closest to src. 32
[Sat Jul 28 12:00:56 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:56 2012] Assessing source extent using major
[Sat Jul 28 12:00:56 2012] Source does appear to be extended
[Sat Jul 28 12:00:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 07:50:05 2012] XMMSAS src. selection expression = ellipse(30437.435822, 28551.109192, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 29 07:50:05 2012] Writing source region out to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src50_src.reg
[Sun Jul 29 07:50:05 2012] Extracting stamp from image fullrun_mos1_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (313, 291) - (388, 366)
[Sun Jul 29 07:50:05 2012] XMMSAS bgd. selection expression = annulus(30437.435822, 28551.109192, 1087.500000, 2175.000000, X, Y) && !ellipse(27434.688000, 25075.573400, 1876.128054, 880.752025, 328.119000, X, Y) && !ellipse(29685.068600, 27256.303200, 1009.304029, 1009.304029, 0.000000, X, Y) && !ellipse(28742.709360, 25726.463800, 1217.656035, 1217.656035, 0.000000, X, Y) && !ellipse(29220.427740, 32944.037200, 3120.064090, 1290.512037, 61.864000, X, Y) && !ellipse(27759.646000, 26954.518000, 600.073617, 600.073617, 0.000000, X, Y) && !ellipse(29937.797800, 30812.520600, 876.024025, 876.024025, 0.000000, X, Y) && !ellipse(32042.004200, 28917.336000, 1489.488043, 1489.488043, 0.000000, X, Y) && !ellipse(29197.504000, 25939.924600, 2435.312070, 2435.312070, 0.000000, X, Y) && !ellipse(29856.624268, 28745.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29761.324400, 29705.884000, 1152.744033, 364.281610, 90.000000, X, Y) && !ellipse(29395.838000, 31906.372000, 1476.336042, 1476.336042, 0.000000, X, Y) && !ellipse(28705.177887, 27705.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31101.488000, 30589.926000, 524.620015, 524.620015, 0.000000, X, Y) && !ellipse(31111.578000, 27809.004000, 1360.320039, 1360.320039, 0.000000, X, Y) && !ellipse(31069.885600, 27215.934200, 1263.312036, 1263.312036, 0.000000, X, Y) && !ellipse(31500.039612, 27257.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30738.343567, 29576.847900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31271.727000, 26563.764000, 717.111221, 717.111221, 0.000000, X, Y) && !ellipse(30999.063440, 30475.382000, 1114.096032, 1114.096032, 0.000000, X, Y) && !ellipse(31966.884033, 29259.234711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28099.636000, 27280.724000, 1249.552036, 1249.552036, 0.000000, X, Y) && !ellipse(31659.601562, 30846.496185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30481.387177, 27960.006744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.462000, 31340.258000, 1533.256044, 1533.256044, 0.000000, X, Y)
[Sun Jul 29 07:50:05 2012] Writing fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src50.gif
[Sun Jul 29 09:53:58 2012] Mean detx,y = (280.50, -6138.08) 
[Sun Jul 29 09:53:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 09:54:12 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 09:54:12 2012] Setting source spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sun Jul 29 09:54:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Mon Jul 30 14:41:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 30 14:41:29 2012] rmf not generated due to insufficient counts
[Tue Jul 31 04:18:44 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:44 2012] Error reading totcts from fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue Jul 31 04:18:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:47 2012] Using photon index=1.80, rate=0.0317, arf fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src50.arf
[Tue Jul 31 04:18:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:47 2012] Updating source flux to 5e-13
[Tue Jul 31 04:19:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting