[Thu Jul 26 09:12:23 2012] Detection parameters:
  Position = (361.2, 318.9) = 14 40 20.16 -62 40 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 405.1 +/- 28.9
  Background counts = 126.4
  Rate = 0.05 +/- 0.004

[Thu Jul 26 09:12:25 2012] Off-axis axis estimate = 4.79'
[Thu Jul 26 17:30:46 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 17:30:46 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Thu Jul 26 17:30:46 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.900
[Thu Jul 26 17:30:46 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 8.82"
[Fri Jul 27 00:31:45 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src34.ximg exists
[Fri Jul 27 00:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src34.csv
[Fri Jul 27 00:31:45 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src34_1.ximg exists
[Fri Jul 27 00:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src34.csv
[Fri Jul 27 00:31:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 00:31:47 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Fri Jul 27 00:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Fri Jul 27 00:31:47 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Jul 27 00:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Fri Jul 27 00:31:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:23:07 2012] Warning, spatial fit 34 centroid is now closest to src. 17
[Fri Jul 27 06:23:08 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:08 2012] Assessing source extent using major
[Fri Jul 27 06:23:08 2012] Source does appear to be extended
[Fri Jul 27 06:23:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:08 2012] Source is confused with source 35
[Fri Jul 27 06:23:08 2012] Source is confused with source 51
[Fri Jul 27 16:50:35 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 16:50:35 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Fri Jul 27 16:50:35 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.900
[Fri Jul 27 16:50:35 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 8.82"
[Sat Jul 28 03:09:38 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src33.ximg exists
[Sat Jul 28 03:09:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src33.csv
[Sat Jul 28 03:09:38 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src33_1.ximg exists
[Sat Jul 28 03:09:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src33.csv
[Sat Jul 28 03:09:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:09:41 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sat Jul 28 03:09:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sat Jul 28 03:09:41 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sat Jul 28 03:09:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sat Jul 28 03:09:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:00:56 2012] Warning, spatial fit 33 centroid is now closest to src. 35
[Sat Jul 28 12:00:56 2012] Spatial fit model total counts = 4984.920000, observed total counts = 4669.000000
[Sat Jul 28 12:00:56 2012] Offset between fit and detection position for source 33 = 3.300736 pixels
[Sat Jul 28 12:00:56 2012] Warning, changing simple spatial fit ID from 33 to 57
[Sat Jul 28 12:00:56 2012] 3831.284000 total counts/ 3175.270000 bgd. counts: snr = 11.641871
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 3.300736 pixels
  Position = (358.2, 320.2) = 14 40 22.08 -62 39 55.2
  Extent = 17.0 (17.0-17.0)", rotation angle = 0
  Source counts = 656.0 +/- 61.9
  Background counts = 3175.3
  Rate = 0.05 +/- 0.005
[Sat Jul 28 12:00:56 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:56 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:00:56 2012] Source does appear to be extended
[Sat Jul 28 12:00:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 07:50:04 2012] XMMSAS src. selection expression = ellipse(31111.578000, 27809.004000, 1020.240029, 1020.240029, 0.000000, X, Y)
[Sun Jul 29 07:50:04 2012] Writing source region out to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src33_src.reg
[Sun Jul 29 07:50:04 2012] Extracting stamp from image fullrun_mos1_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (300, 262) - (417, 379)
[Sun Jul 29 07:50:04 2012] XMMSAS bgd. selection expression = annulus(31111.578000, 27809.004000, 1700.400049, 3400.800098, X, Y) && !ellipse(27434.688000, 25075.573400, 1876.128054, 880.752025, 328.119000, X, Y) && !ellipse(29685.068600, 27256.303200, 1009.304029, 1009.304029, 0.000000, X, Y) && !ellipse(26579.040000, 24386.481800, 1148.288033, 1148.288033, 0.000000, X, Y) && !ellipse(28742.709360, 25726.463800, 1217.656035, 1217.656035, 0.000000, X, Y) && !ellipse(29220.427740, 32944.037200, 3120.064090, 1290.512037, 61.864000, X, Y) && !ellipse(27759.646000, 26954.518000, 600.073617, 600.073617, 0.000000, X, Y) && !ellipse(29937.797800, 30812.520600, 876.024025, 876.024025, 0.000000, X, Y) && !ellipse(32042.004200, 28917.336000, 1489.488043, 1489.488043, 0.000000, X, Y) && !ellipse(29197.504000, 25939.924600, 2435.312070, 2435.312070, 0.000000, X, Y) && !ellipse(29856.624268, 28745.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29825.086000, 32520.200000, 1532.024044, 399.435211, 338.038000, X, Y) && !ellipse(29761.324400, 29705.884000, 1152.744033, 364.281610, 90.000000, X, Y) && !ellipse(29395.838000, 31906.372000, 1476.336042, 1476.336042, 0.000000, X, Y) && !ellipse(28705.177887, 27705.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31101.488000, 30589.926000, 524.620015, 524.620015, 0.000000, X, Y) && !ellipse(31069.885600, 27215.934200, 1263.312036, 1263.312036, 0.000000, X, Y) && !ellipse(31500.039612, 27257.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30738.343567, 29576.847900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31271.727000, 26563.764000, 717.111221, 717.111221, 0.000000, X, Y) && !ellipse(30999.063440, 30475.382000, 1114.096032, 1114.096032, 0.000000, X, Y) && !ellipse(31966.884033, 29259.234711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28099.636000, 27280.724000, 1249.552036, 1249.552036, 0.000000, X, Y) && !ellipse(30437.435822, 28551.109192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31659.601562, 30846.496185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30332.920593, 32040.545166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31555.975769, 31866.648712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30481.387177, 27960.006744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.536000, 23864.170800, 732.123221, 732.123221, 0.000000, X, Y) && !ellipse(31873.618164, 24369.592041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30176.313690, 24053.988708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.354800, 24092.432000, 1314.736038, 1314.736038, 0.000000, X, Y) && !ellipse(30681.231232, 23794.722443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.462000, 31340.258000, 1533.256044, 1533.256044, 0.000000, X, Y) && !ellipse(29985.379913, 24551.174805, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 29 07:50:04 2012] Writing fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src33.gif
[Sun Jul 29 09:28:17 2012] Mean detx,y = (1239.21, -6019.97) 
[Sun Jul 29 09:28:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 09:28:41 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 09:28:41 2012] Setting source spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jul 29 09:28:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Jul 31 04:18:43 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:43 2012] Error reading totcts from fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jul 31 04:18:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:47 2012] Using photon index=1.80, rate=0.0545, arf fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src33.arf
[Tue Jul 31 04:18:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:47 2012] Updating source flux to 7.1e-13
[Tue Jul 31 04:19:00 2012] Flag c found in src. 33 procflags, skipping spectral fitting