[Thu Jul 26 09:12:23 2012] Detection parameters:
  Position = (344.3, 348.1) = 14 40 30.84 -62 37 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 386.0 +/- 30.6
  Background counts = 244.1
  Rate = 0.06 +/- 0.004

[Thu Jul 26 09:12:25 2012] Off-axis axis estimate = 4.90'
[Thu Jul 26 17:30:46 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 17:30:46 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Thu Jul 26 17:30:46 2012] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.813
[Thu Jul 26 17:30:46 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.88"
[Fri Jul 27 00:31:45 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src28.ximg exists
[Fri Jul 27 00:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src28.csv
[Fri Jul 27 00:31:45 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Jul 27 00:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src28.csv
[Fri Jul 27 00:31:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 00:31:47 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Jul 27 00:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Jul 27 00:31:47 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Jul 27 00:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Jul 27 00:31:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:23:07 2012] Spatial fit model total counts = 3879.520000, observed total counts = 3561.000000
[Fri Jul 27 06:23:07 2012] Offset between fit and detection position for source 32 = 6.348545 pixels
[Fri Jul 27 06:23:07 2012] Warning, changing simple spatial fit ID from 28 to 24
[Fri Jul 27 06:23:07 2012] 3805.213000 total counts/ 3698.360000 bgd. counts: snr = 1.757042
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 6.348545 pixels
  Position = (342.6, 342.0) = 14 40 31.91 -62 38 20.5
  Extent = 14.4" x 4.6", rotation angle = 90
  Source counts = 106.9 +/- 61.7
  Background counts = 3698.4
  Rate = 0.009 +/- 0.005
[Fri Jul 27 06:23:08 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:08 2012] Assessing source extent using major
[Fri Jul 27 06:23:08 2012] Source does appear to be extended
[Fri Jul 27 06:23:08 2012] Computing asymmetry using major and minor axis, asym = 3.16
[Fri Jul 27 06:23:08 2012] Source is asymmetric
[Fri Jul 27 16:50:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 16:50:35 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Fri Jul 27 16:50:35 2012] source mask rpix=2.2, npix_max = 28, mask sum = 5, frac = 0.174
[Fri Jul 27 16:50:35 2012] Skipping simple spatial due to low active detector fraction
[Sat Jul 28 12:00:56 2012] Source 32 is offset by 0.288223 and 4.028322 pixels which is larger than
2 X fitted extent = 1.676662 x 1.676662, not incorporating fit results
[Sat Jul 28 12:00:56 2012] Source 32 is offset by 1.772349 and 3.873724 pixels which is larger than
2 X fitted extent = 1.141338 x 1.141338, not incorporating fit results
[Sat Jul 28 12:00:56 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:56 2012] Assessing source extent using major
[Sat Jul 28 12:00:56 2012] Source does appear to be extended
[Sat Jul 28 12:00:56 2012] Computing asymmetry using major and minor axis, asym = 3.16
[Sat Jul 28 12:00:56 2012] Source is asymmetric
[Sun Jul 29 07:50:03 2012] XMMSAS src. selection expression = ellipse(29761.324400, 29705.884000, 864.558025, 273.211208, 90.000000, X, Y)
[Sun Jul 29 07:50:03 2012] Writing source region out to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src32_src.reg
[Sun Jul 29 07:50:03 2012] Extracting stamp from image fullrun_mos1_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (293, 292) - (392, 392)
[Sun Jul 29 07:50:03 2012] XMMSAS bgd. selection expression = annulus(29761.324400, 29705.884000, 1440.930041, 2881.860083, X, Y) && !ellipse(27434.688000, 25075.573400, 1876.128054, 880.752025, 328.119000, X, Y) && !ellipse(29685.068600, 27256.303200, 1009.304029, 1009.304029, 0.000000, X, Y) && !ellipse(28742.709360, 25726.463800, 1217.656035, 1217.656035, 0.000000, X, Y) && !ellipse(29220.427740, 32944.037200, 3120.064090, 1290.512037, 61.864000, X, Y) && !ellipse(27759.646000, 26954.518000, 600.073617, 600.073617, 0.000000, X, Y) && !ellipse(29937.797800, 30812.520600, 876.024025, 876.024025, 0.000000, X, Y) && !ellipse(28982.878400, 33653.862000, 1589.144046, 1475.608042, 41.642200, X, Y) && !ellipse(32042.004200, 28917.336000, 1489.488043, 1489.488043, 0.000000, X, Y) && !ellipse(29197.504000, 25939.924600, 2435.312070, 2435.312070, 0.000000, X, Y) && !ellipse(29856.624268, 28745.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29825.086000, 32520.200000, 1532.024044, 399.435211, 338.038000, X, Y) && !ellipse(29395.838000, 31906.372000, 1476.336042, 1476.336042, 0.000000, X, Y) && !ellipse(28705.177887, 27705.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31101.488000, 30589.926000, 524.620015, 524.620015, 0.000000, X, Y) && !ellipse(31111.578000, 27809.004000, 1360.320039, 1360.320039, 0.000000, X, Y) && !ellipse(31069.885600, 27215.934200, 1263.312036, 1263.312036, 0.000000, X, Y) && !ellipse(31500.039612, 27257.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29049.892000, 35094.280000, 3422.080098, 3422.080098, 0.000000, X, Y) && !ellipse(30738.343567, 29576.847900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31271.727000, 26563.764000, 717.111221, 717.111221, 0.000000, X, Y) && !ellipse(30999.063440, 30475.382000, 1114.096032, 1114.096032, 0.000000, X, Y) && !ellipse(31966.884033, 29259.234711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28099.636000, 27280.724000, 1249.552036, 1249.552036, 0.000000, X, Y) && !ellipse(30437.435822, 28551.109192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31659.601562, 30846.496185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30332.920593, 32040.545166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31555.975769, 31866.648712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30481.387177, 27960.006744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.462000, 31340.258000, 1533.256044, 1533.256044, 0.000000, X, Y)
[Sun Jul 29 07:50:03 2012] Writing fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src32.gif
[Sun Jul 29 09:23:27 2012] Mean detx,y = (-1004.81, -6825.96) 
[Sun Jul 29 09:23:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 09:23:38 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 09:23:38 2012] Setting source spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Jul 29 09:23:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Tue Jul 31 04:18:43 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:43 2012] Error reading totcts from fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Jul 31 04:18:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:47 2012] Using photon index=1.80, rate=0.00888, arf fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src32.arf
[Tue Jul 31 04:18:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:47 2012] Updating source flux to 1.3e-12
[Tue Jul 31 04:19:00 2012] Flag b found in src. 32 procflags, skipping spectral fitting