[Thu Jul 26 09:12:23 2012] Detection parameters:
  Position = (367.2, 329.3) = 14 40 16.39 -62 39 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 621.4 +/- 34.1
  Background counts = 92.7
  Rate = 0.08 +/- 0.004

[Thu Jul 26 09:12:25 2012] Off-axis axis estimate = 5.46'
[Thu Jul 26 17:30:46 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 17:30:46 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Thu Jul 26 17:30:46 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.884
[Thu Jul 26 17:30:46 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.16"
[Fri Jul 27 00:31:45 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src17.ximg exists
[Fri Jul 27 00:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src17.csv
[Fri Jul 27 00:31:45 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Jul 27 00:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src17.csv
[Fri Jul 27 00:31:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 00:31:47 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Jul 27 00:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri Jul 27 00:31:47 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Jul 27 00:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri Jul 27 00:31:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 06:23:07 2012] Spatial fit model total counts = 2906.810000, observed total counts = 2342.000000
[Fri Jul 27 06:23:07 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 06:23:07 2012] Source 17 is offset by -1.919250 and 2.174744 pixels which is larger than
2 X fitted extent = 1.013968 x 1.013968, not incorporating fit results
[Fri Jul 27 06:23:07 2012] Spatial fit model total counts = 2474.840000, observed total counts = 2377.000000
[Fri Jul 27 06:23:07 2012] Offset between fit and detection position for source 17 = 4.015164 pixels
[Fri Jul 27 06:23:07 2012] Warning, changing simple spatial fit ID from 17 to 46
[Fri Jul 27 06:23:07 2012] 2199.100000 total counts/ 1465.470000 bgd. counts: snr = 19.164108
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 4.015164 pixels
  Position = (368.9, 332.9) = 14 40 15.35 -62 38 59.7
  Extent = 18.6 (18.4-37.2)", rotation angle = 0
  Source counts = 733.6 +/- 46.9
  Background counts = 1465.5
  Rate = 0.06 +/- 0.004
[Fri Jul 27 06:23:08 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:08 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 06:23:08 2012] Source does appear to be extended
[Fri Jul 27 06:23:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:23:08 2012] Source is confused with source 49
[Fri Jul 27 06:23:08 2012] Source is confused with source 82
[Fri Jul 27 16:50:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 16:50:35 2012] Initial guess for spatial extent in simple fitting = 18.62"
[Fri Jul 27 16:50:35 2012] source mask rpix=4.3, npix_max = 91, mask sum = 99, frac = 1.083
[Fri Jul 27 16:50:35 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 18.62"
[Sat Jul 28 03:09:38 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src17.ximg exists
[Sat Jul 28 03:09:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src17.csv
[Sat Jul 28 03:09:38 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Jul 28 03:09:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src17.csv
[Sat Jul 28 03:09:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:09:40 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Jul 28 03:09:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Jul 28 03:09:40 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Jul 28 03:09:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Jul 28 03:09:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 12:00:56 2012] Warning, spatial fit 17 centroid is now closest to src. 49
[Sat Jul 28 12:00:56 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:56 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:00:56 2012] Source does appear to be extended
[Sat Jul 28 12:00:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 07:50:02 2012] XMMSAS src. selection expression = ellipse(32042.004200, 28917.336000, 1117.116032, 1117.116032, 0.000000, X, Y)
[Sun Jul 29 07:50:02 2012] Writing source region out to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src17_src.reg
[Sun Jul 29 07:50:02 2012] Extracting stamp from image fullrun_mos1_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (305, 269) - (433, 397)
[Sun Jul 29 07:50:02 2012] XMMSAS bgd. selection expression = annulus(32042.004200, 28917.336000, 1861.860054, 3723.720107, X, Y) && !ellipse(27434.688000, 25075.573400, 1876.128054, 880.752025, 328.119000, X, Y) && !ellipse(29685.068600, 27256.303200, 1009.304029, 1009.304029, 0.000000, X, Y) && !ellipse(28742.709360, 25726.463800, 1217.656035, 1217.656035, 0.000000, X, Y) && !ellipse(29220.427740, 32944.037200, 3120.064090, 1290.512037, 61.864000, X, Y) && !ellipse(27759.646000, 26954.518000, 600.073617, 600.073617, 0.000000, X, Y) && !ellipse(29937.797800, 30812.520600, 876.024025, 876.024025, 0.000000, X, Y) && !ellipse(28982.878400, 33653.862000, 1589.144046, 1475.608042, 41.642200, X, Y) && !ellipse(29197.504000, 25939.924600, 2435.312070, 2435.312070, 0.000000, X, Y) && !ellipse(29856.624268, 28745.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29825.086000, 32520.200000, 1532.024044, 399.435211, 338.038000, X, Y) && !ellipse(29761.324400, 29705.884000, 1152.744033, 364.281610, 90.000000, X, Y) && !ellipse(29395.838000, 31906.372000, 1476.336042, 1476.336042, 0.000000, X, Y) && !ellipse(28705.177887, 27705.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31101.488000, 30589.926000, 524.620015, 524.620015, 0.000000, X, Y) && !ellipse(31111.578000, 27809.004000, 1360.320039, 1360.320039, 0.000000, X, Y) && !ellipse(31069.885600, 27215.934200, 1263.312036, 1263.312036, 0.000000, X, Y) && !ellipse(31500.039612, 27257.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29049.892000, 35094.280000, 3422.080098, 3422.080098, 0.000000, X, Y) && !ellipse(30738.343567, 29576.847900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31271.727000, 26563.764000, 717.111221, 717.111221, 0.000000, X, Y) && !ellipse(30999.063440, 30475.382000, 1114.096032, 1114.096032, 0.000000, X, Y) && !ellipse(31966.884033, 29259.234711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28099.636000, 27280.724000, 1249.552036, 1249.552036, 0.000000, X, Y) && !ellipse(30437.435822, 28551.109192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31659.601562, 30846.496185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30332.920593, 32040.545166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31555.975769, 31866.648712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30481.387177, 27960.006744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31873.618164, 24369.592041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.354800, 24092.432000, 1314.736038, 1314.736038, 0.000000, X, Y) && !ellipse(31923.462000, 31340.258000, 1533.256044, 1533.256044, 0.000000, X, Y) && !ellipse(29985.379913, 24551.174805, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 29 07:50:02 2012] Writing fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src17.gif
[Sun Jul 29 08:45:03 2012] Mean detx,y = (1070.44, -7563.32) 
[Sun Jul 29 08:45:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 08:45:42 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 08:45:43 2012] Setting source spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jul 29 08:45:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Jul 31 04:18:42 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:42 2012] Error reading totcts from fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jul 31 04:18:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:46 2012] Using photon index=1.80, rate=0.061, arf fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src17.arf
[Tue Jul 31 04:18:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:46 2012] Updating source flux to 8.6e-13
[Tue Jul 31 04:19:00 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Tue Jul 31 04:19:00 2012] Flag p found in src. 17 procflags, skipping spectral fitting
[Tue Jul 31 04:19:00 2012] Flag c found in src. 17 procflags, skipping spectral fitting