[Thu Jul 26 09:12:23 2012] Detection parameters:
  Position = (345.2, 354.2) = 14 40 30.32 -62 37 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 657.6 +/- 37.9
  Background counts = 204.6
  Rate = 0.09 +/- 0.005

[Thu Jul 26 09:12:25 2012] Off-axis axis estimate = 5.28'
[Thu Jul 26 17:30:46 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 17:30:46 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Thu Jul 26 17:30:46 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.861
[Thu Jul 26 17:30:46 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.07"
[Fri Jul 27 00:31:45 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jul 27 00:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src15.csv
[Fri Jul 27 00:31:45 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jul 27 00:31:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src15.csv
[Fri Jul 27 00:31:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 00:31:47 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jul 27 00:31:47 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jul 27 00:31:47 2012] Fit fullrun_mos1_xmm0110012501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jul 27 06:23:07 2012] Warning, spatial fit 15 centroid is now closest to src. 45
[Fri Jul 27 06:23:08 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 06:23:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 06:23:08 2012] Assessing source extent using major
[Fri Jul 27 06:23:08 2012] Source does appear to be extended
[Fri Jul 27 06:23:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 16:50:35 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 16:50:35 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Fri Jul 27 16:50:35 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.861
[Fri Jul 27 16:50:35 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.07"
[Sat Jul 28 03:09:38 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jul 28 03:09:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src15.csv
[Sat Jul 28 03:09:38 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jul 28 03:09:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src15.csv
[Sat Jul 28 03:09:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:09:40 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jul 28 03:09:40 2012] fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jul 28 03:09:40 2012] Fit fullrun_mos1_xmm0110012501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Jul 28 12:00:56 2012] Spatial fit model total counts = 4313.340000, observed total counts = 4277.000000
[Sat Jul 28 12:00:56 2012] Offset between fit and detection position for source 16 = 0.713321 pixels
[Sat Jul 28 12:00:56 2012] 4182.054000 total counts/ 3591.610000 bgd. counts: snr = 9.852221
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.713321 pixels
  Position = (344.7, 354.7) = 14 40 30.64 -62 37 25.2
  Extent = 11.0 (8.7-13.9)", rotation angle = 0
  Source counts = 590.4 +/- 64.7
  Background counts = 3591.6
  Rate = 0.05 +/- 0.005
[Sat Jul 28 12:00:56 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 12:00:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 12:00:56 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 12:00:56 2012] Source does appear to be extended
[Sat Jul 28 12:00:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 12:00:56 2012] Source is confused with source 10
[Sun Jul 29 07:50:02 2012] XMMSAS src. selection expression = ellipse(29937.797800, 30812.520600, 657.018019, 657.018019, 0.000000, X, Y)
[Sun Jul 29 07:50:02 2012] Writing source region out to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src16_src.reg
[Sun Jul 29 07:50:02 2012] Extracting stamp from image fullrun_mos1_xmm0110012501_pi300-10000_cl_sm2.00.img.gz, (307, 317) - (382, 392)
[Sun Jul 29 07:50:02 2012] XMMSAS bgd. selection expression = annulus(29937.797800, 30812.520600, 1095.030032, 2190.060063, X, Y) && !ellipse(29220.427740, 32944.037200, 3120.064090, 1290.512037, 61.864000, X, Y) && !ellipse(28982.878400, 33653.862000, 1589.144046, 1475.608042, 41.642200, X, Y) && !ellipse(32042.004200, 28917.336000, 1489.488043, 1489.488043, 0.000000, X, Y) && !ellipse(29856.624268, 28745.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29825.086000, 32520.200000, 1532.024044, 399.435211, 338.038000, X, Y) && !ellipse(29761.324400, 29705.884000, 1152.744033, 364.281610, 90.000000, X, Y) && !ellipse(29395.838000, 31906.372000, 1476.336042, 1476.336042, 0.000000, X, Y) && !ellipse(31101.488000, 30589.926000, 524.620015, 524.620015, 0.000000, X, Y) && !ellipse(31111.578000, 27809.004000, 1360.320039, 1360.320039, 0.000000, X, Y) && !ellipse(29049.892000, 35094.280000, 3422.080098, 3422.080098, 0.000000, X, Y) && !ellipse(30738.343567, 29576.847900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30999.063440, 30475.382000, 1114.096032, 1114.096032, 0.000000, X, Y) && !ellipse(31966.884033, 29259.234711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30437.435822, 28551.109192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31659.601562, 30846.496185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30332.920593, 32040.545166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31555.975769, 31866.648712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30481.387177, 27960.006744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.462000, 31340.258000, 1533.256044, 1533.256044, 0.000000, X, Y)
[Sun Jul 29 07:50:02 2012] Writing fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src16.gif
[Sun Jul 29 08:41:06 2012] Mean detx,y = (-1561.62, -7698.71) 
[Sun Jul 29 08:41:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 08:41:18 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 08:41:18 2012] Setting source spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Jul 29 08:41:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jul 31 04:18:42 2012] Updating aperture counts using extracted products
[Tue Jul 31 04:18:42 2012] Error reading totcts from fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jul 31 04:18:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 04:18:46 2012] Using photon index=1.80, rate=0.0491, arf fullrun_mos1_xmm0110012501_pi300-10000_pass1_cl_src16.arf
[Tue Jul 31 04:18:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 04:18:46 2012] Updating source flux to 7.6e-13
[Tue Jul 31 04:19:00 2012] Flag c found in src. 16 procflags, skipping spectral fitting