[Thu May 31 04:16:31 2012] Detection parameters:
  Position = (238.3, 383.4) = 23 23 59.08 58 53 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.0 +/- 20.2
  Background counts = 140.4
  Rate = 0.005 +/- 0.0009

[Thu May 31 04:16:31 2012] Off-axis axis estimate = 7.54'
[Mon Jun  4 08:04:48 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 08:04:48 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Mon Jun  4 08:04:48 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.927
[Mon Jun  4 08:04:48 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 10.20"
[Mon Jun  4 15:29:06 2012] fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_src50.ximg exists
[Mon Jun  4 15:29:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_src50.csv
[Mon Jun  4 15:29:06 2012] fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_src50_1.ximg exists
[Mon Jun  4 15:29:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_src50.csv
[Mon Jun  4 15:29:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 15:29:08 2012] fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Mon Jun  4 15:29:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_tfrozen_src50.csv
[Mon Jun  4 15:29:08 2012] fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Mon Jun  4 15:29:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_tfrozen_src50.csv
[Mon Jun  4 15:29:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110011801_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 21:08:23 2012] Warning, spatial fit 50 centroid is now closest to src. 63
[Tue Jun  5 21:08:23 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 21:08:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 21:08:23 2012] Assessing source extent using major
[Tue Jun  5 21:08:23 2012] Source does appear to be extended
[Tue Jun  5 21:08:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 21:08:23 2012] Deleting source due to low Poisson probability 0.9