[Tue Aug  7 03:24:03 2012] Detection parameters:
  Position = (371.1, 328.7) = 14 41 21.50 -62 12 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.7 +/- 19.3
  Background counts = 124.5
  Rate = 0.008 +/- 0.002

[Tue Aug  7 03:24:04 2012] Off-axis axis estimate = 5.70'
[Tue Aug  7 03:27:41 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 03:27:41 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Tue Aug  7 03:27:41 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.081
[Tue Aug  7 03:27:41 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 9.28"
[Tue Aug  7 08:24:40 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src63.ximg exists
[Tue Aug  7 08:24:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src63.csv
[Tue Aug  7 08:24:40 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src63_1.ximg exists
[Tue Aug  7 08:24:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src63.csv
[Tue Aug  7 08:24:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Tue Aug  7 08:24:42 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Tue Aug  7 08:24:43 2012] Fit fullrun_pn_xmm0110011401_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Tue Aug  7 20:58:20 2012] Spatial fit model total counts = 902.529000, observed total counts = 886.000000
[Tue Aug  7 20:58:20 2012] Offset between fit and detection position for source 65 = 2.233804 pixels
[Tue Aug  7 20:58:20 2012] 880.262000 total counts/ 690.428000 bgd. counts: snr = 7.224617
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 2.233804 pixels
  Position = (372.1, 326.7) = 14 41 20.88 -62 12 32.9
  Extent = 18.6 (18.5-18.6)", rotation angle = 0
  Source counts = 189.8 +/- 29.7
  Background counts = 690.4
  Rate = 0.02 +/- 0.003
[Tue Aug  7 20:58:20 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 20:58:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 20:58:20 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 20:58:20 2012] Source does appear to be extended
[Tue Aug  7 20:58:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:58:21 2012] Source is confused with source 64
[Tue Aug  7 20:59:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 20:59:37 2012] Initial guess for spatial extent in simple fitting = 18.55"
[Tue Aug  7 20:59:37 2012] source mask rpix=4.3, npix_max = 90, mask sum = 90, frac = 0.991
[Tue Aug  7 20:59:37 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 18.55"
[Wed Aug  8 05:47:19 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src59.ximg exists
[Wed Aug  8 05:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src59.csv
[Wed Aug  8 05:47:19 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src59_1.ximg exists
[Wed Aug  8 05:47:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src59.csv
[Wed Aug  8 05:47:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 05:47:21 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Wed Aug  8 05:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed Aug  8 05:47:21 2012] fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Wed Aug  8 05:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed Aug  8 05:47:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110011401_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:57:24 2012] Warning, spatial fit 59 centroid is now closest to src. 74
[Wed Aug  8 22:57:25 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:57:25 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:57:25 2012] Source does appear to be extended
[Wed Aug  8 22:57:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 22:58:23 2012] XMMSAS src. selection expression = ellipse(32320.269000, 28371.438000, 1113.042032, 1113.042032, 0.000000, X, Y)
[Wed Aug  8 22:58:23 2012] Writing source region out to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src65_src.reg
[Wed Aug  8 22:58:23 2012] Extracting stamp from image fullrun_pn_xmm0110011401_pi300-10000_cl_sm2.00.img.gz, (308, 263) - (436, 391)
[Wed Aug  8 22:58:23 2012] XMMSAS bgd. selection expression = annulus(32320.269000, 28371.438000, 1855.070053, 3710.140107, X, Y) && !ellipse(28576.566000, 26956.684000, 1253.496036, 1253.496036, 0.000000, X, Y) && !ellipse(31269.041443, 26394.174011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31725.172821, 26308.347534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33458.358000, 25711.908000, 1549.184045, 1549.184045, 0.000000, X, Y) && !ellipse(33601.838000, 25857.248600, 1511.664043, 1511.664043, 0.000000, X, Y) && !ellipse(34525.538000, 25654.284000, 3023.328087, 2336.760067, 85.084000, X, Y) && !ellipse(35808.225555, 25535.375580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32515.600400, 32855.315400, 1147.704033, 1147.704033, 0.000000, X, Y) && !ellipse(30197.649506, 29423.007538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29006.290070, 28375.786987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32783.856000, 28789.244600, 1540.216044, 1540.216044, 0.000000, X, Y) && !ellipse(28160.684479, 28201.917084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33760.109406, 28448.571960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31187.367432, 27859.824524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28897.394043, 27692.257660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31974.859741, 27331.842743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31381.181915, 27427.341492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29508.186188, 27338.228088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35354.260681, 26923.730225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36131.873627, 26886.591675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33704.706909, 26473.370880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29185.021332, 26747.887634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29543.844000, 26503.384000, 1253.496036, 1253.496036, 0.000000, X, Y) && !ellipse(36396.149933, 26075.265167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36816.855255, 25271.731171, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  8 22:58:23 2012] Writing fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src65.gif
[Thu Aug  9 00:47:01 2012] Mean detx,y = (5862.31, 1475.11) 
[Thu Aug  9 00:47:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 00:47:54 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 00:47:54 2012] Setting source spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Thu Aug  9 00:47:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Thu Aug  9 21:39:55 2012] Updating aperture counts using extracted products
[Thu Aug  9 21:39:55 2012] Error reading totcts from fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Thu Aug  9 21:39:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 21:39:57 2012] Using photon index=1.80, rate=0.0194, arf fullrun_pn_xmm0110011401_pi300-10000_pass1_cl_src65.arf
[Thu Aug  9 21:39:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 21:39:57 2012] Updating source flux to 5.8e-14
[Thu Aug  9 22:00:41 2012] Flag c found in src. 65 procflags, skipping spectral fitting